• Journal of Electrical Engineering and Technology
• /
• v.3 no.4
• /
• pp.484-490
• /
• 2008

In this paper, an integrated fault section detection and isolation strategy is proposed based on the application of the Distribution Automation System(DAS) utilizing advanced IT and communication technologies. The Feeder Remote Terminal Unit(FRTU) has been widely used to collect data in the Korean distribution system. The achieved data is adopted in this method for detecting multiple fault types. Especially in the case of single phase-to-ground fault, the fault section is detected by comparison of the zero-sequence current phase angle. The test results have verified the effectiveness of the proposed method in a radial distribution system through extensive simulations in Matlab/Simulink. Furthermore, a communication-based demo system identical to the simulation model has been developed, and it can be applied as an online monitoring and control program for fault section detection and isolation.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.3
• /
• pp.65-71
• /
• 2002

Friction welding has may merits such as energy efficiency, simple processing, etc. but it is difficult to obtain good welding at the welded interfaces and heat affected zone. It is discovered that stress singularity exists at the interferes and heat affected zone. The computer program based on boundary element method is utilized in this study. A mathematical model is implemented based on results from several experiments performed at and around the welded interfaces and heat affected zone of disimilar metals under static and dynamic loadings. This stay is to investigate the characteristics of the deformation and fracture behavior around interfaces for friction welded materials under static tensile load. Also, the stress distribution at the tip of crack is analyzed by using BU based on Kelvin's solution of 2-dimensional binding zone. The results of BEM are identical with those in case of considering interfaces of both heat affected zone. Also, stress singularity at the tip of interfaces appears when the elastic modulus ratio is 1.07.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.4
• /
• pp.97-103
• /
• 2012

This study investigates thermal insulation properties of multi layer materials depending on thickness of air layers. Numerical analysis on the heat flow of different insulating materials was conducted to identify whether their temperature distributions demonstrate the reduced rate of heat transfer conclusively or not. Analytical model is divided into two categories. One is to distinguish temperature distribution of the air-layer materials from the non-air layer ones. The other is to compare the efficacy between eight-layered insulating materials with no air-layer contained and three-layered insulating materials which include an air-layer definitely. In the latter case, the identical thickness is assigned to each material. The effect of thermal insulation by including an air-layer is verified in the first analytical model. The result of the second model shows that the insulation of the eight-layered materials is coterminous at the three-layered ones with an air-layer and the thermal insulation of the two materials is imperceptible. The benefits of cost and energy saving are anticipated if air-layers are efficiently incorporated in multi layer insulating materials in a greenhouse.

• Korean Institute of Interior Design Journal
• /
• v.22 no.5
• /
• pp.106-113
• /
• 2013

Since the 1960's, diverse movements that oppose the uniform design tendency of modernism appears in Italy. Especially, Gaetano Pesce, who opposed uniformity and standardization that are based on mass production system, had interests in making unique product, not an identical product, while accepting modern production technology. Therefore, the purpose of this study is to comprehend Pesce's design, which creates diversity by arranging contingent, non-predictive, and episodic aspects in creative and acceptance processes according to the intension of the designer within mass production system, as a non-representational characteristic, which appears widely in modern thought and the arts, and examine how it is materialized in detailed design work. The study methods are first examining non-representation with theoretical contemplation and dealing with the design philosophy of Pesce based on the examination. Next, in order to discover non-representational characteristics that appear in the work of Pesce, it examines from introducing worker's creativity, user's possibility of choice, openness in the working process, and the aspects of researching materials. And a specific application method will be drawn through case analysis centered on furniture design. Gaetano Pesce's design that denies the world of representation based on the sameness comes to possess non-representational characteristics that acknowledge contingency and ceaselessly create difference by intentionally arranging during the working process.

• Korea-Australia Rheology Journal
• /
• v.20 no.1
• /
• pp.27-34
• /
• 2008

Clay suspensions in liquid polymers exhibit a time-dependent behaviour that includes viscoelastic as well as thixotropic features. Because of the presence of interacting clay platelets, particulate networks can develop, which are broken down during flow and rebuild upon cessation of the flow. Here, the use of thixotropic techniques in probing flow-induced structures in nanocomposites is explored with data on a hectorite-poly(isobutylene) model system. By means of fast stress jump measurements the hydrodynamic contributions to the steady state stresses are determined as well as those caused by the stretching of the clay floes. Flow reversal measurements do not provide a clear indication of flow-induced anisotropy in the present case. The recovery of the clay microstructure upon cessation of flow is followed by means of overshoot and dynamic measurements. The development of a particulate network is detected by the appearance and growth of a low frequency plateau of the storage moduli. The modulus-frequency curves after various rest times collapse onto universal master curves, regardless of the pre-shear history or temperature. The scaling factors for this master curve are the crossover parameters. The crossover moduli are nearly a linear function of the crossover frequency, the relation being identical for recovery after shearing at different shear rates. This function depends, however, on temperature.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.2 s.95
• /
• pp.192-198
• /
• 2005

Empirical mode decomposition(EMD) method has been recently proposed to analyze non-linear and non-stationary data. This method allows the decomposition of one-dimensional signals into intrinsic mode functions(IMFs) and is used to calculate a meaningful multi-component instantaneous frequency. In this paper, it is assumed that each mode of damped vibration signal could be well separated in the form of IMF by EMD. In this case, we can have a new powerful method to calculate natural frequencies and dampings from damped vibration signal which usually has multiple modes. This proposed method has been verified by both simulation and experiment. The results by EMD method whichhas used only output vibration data are almost identical to the results by FRF method which has used both input and output data, thereby proving usefulness and accuracy of the proposed method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.5
• /
• pp.1400-1420
• /
• 2012

Object detection and tracking using visual sensors is a critical component of surveillance systems, which presents many challenges. This paper addresses the enhancement of object detection and tracking via the combination of multiple visual sensors. The enhancement method we introduce compensates for missed object detection based on the partial detection of objects by multiple visual sensors. When one detects an object or more visual sensors, the detected object's local positions transformed into a global object position. Local and global information exchange allows a missed local object's position to recover. However, the exchange of the information may degrade the detection and tracking performance by incorrectly recovering the local object position, which propagated by false object detection. Furthermore, local object positions corresponding to an identical object can transformed into nonequivalent global object positions because of detection uncertainty such as shadows or other artifacts. We improved the performance by preventing the propagation of false object detection. In addition, we present an evaluation method for the final global object position. The proposed method analyzed and evaluated using case studies.

• Journal of Korean Society for Quality Management
• /
• v.9 no.1
• /
• pp.3-11
• /
• 1981

A stress-strength model is formulated for s of k systems consisting of identical components. We consider minimum variance unbiased (MVU) estimation of system reliability for data consisting of a random sample from the stress distribution and one from the strength distribution when the two distirubtions are Weibull with unknown scale parameters and same known shape parameter. The asymptotic distribution of MVU estimate of system reliability in the model is obtained by using the standard asymptotic properties of the maximum likelihood estimate of system reliability and establishing their equivalence. Uniformly most accurate unbiased confidence intervals are also obtained for system reliability. Empirical comparison of the two estimates for small samples is studies by Monte Carlo simulation.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.138.2-138.2
• /
• 2011

Astronomical data such as calendar day and time of rising/setting of the sun and onset of twilight are essential in our daily lives. Knowing the calendar day of the past is particularly crucial for studying the history of a clan or a nation. To verify previous studies on the calendar day of the Joseon dynasty (1392 - 1910), we also investigated the sexagenary cycle of the new moon day (i.e., the first day in a lunar month) using different sources: results of the calculation by the Datong calendar (a Chinese Calendar of the Ming Dynasty) and data of Baekjungryeok (a Perpetual Calendar - literally, a one hundred-year almanac). Compared with the study of Ahn et al., we have found that as many as 17 sexagenary cycles show discrepancies. In the case of nine discrepancies, we found that the sexagenary cycles of this study are identical to those of the almanacs at that time. In addition, we study six sexagenary cycles by using the historical accounts of Joseon Wangjo Sillok (Annals of the Joseon Dynasty), Seungjeongwon Ilgi (Daily Records of Royal Secretariat), Chungung Ilgi (Logs of Crown Prince), and so forth. We present historical materials supporting the results of this study for the remainder. In conclusion, we think that this study will greatly contribute to the comparison between luni-solar calendar days during the Joseon dynasty and those in the modern (i.e., Gregorian) calendar.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11C
• /
• pp.851-859
• /
• 2008

This paper investigates the effect a guard period (GP) in the form of a cyclic prefix for asynchronous multicarrier-code division multiple access (MC-CDMA) systems. At first, we analyze the performance of asynchronous MC-CDMA systems with a GP, which results in closed-form bit error rate (BER) performance. Furthermore, it confirms that the frequency diversity of MC-CDMA systems is identical to the path diversity. The analytical approach proposed here is extended to the case without a GP. The derived analytical results show that a GP is required for MC-CDMA systems in order to mitigate not only the effect of intersymbol interference (ISI) and intercarrier interference (ICI) but also the desired signal power degradation. In addition, the accuracy of the proposed analysis is verified by simulations.