• 한국전산유체공학회지
• /
• 제18권4호
• /
• pp.1-8
• /
• 2013

The performance of small-size impellers with ruled surfaces was investigated for flank milling over a wide speed range, using computational fluid dynamics analyses and gas bench tests. An impeller with a ruled surface was designed, manufactured, and tested to evaluate the effects of blade loading, the backsweep angle, and the relative velocity distribution on the compressor performance. The simulations and tests were completed using the same compressor cover with identical inlet and outlet channels to accurately compare the performance of the abovementioned impeller with a commercial impeller containing sculptured blades. Both impellers have the same number of blades, number of splitters, and shroud meridional profiles. The backsweep angles of the blades on the ruled impeller were selected to work with the same pinched diffuser as for a sculptured impeller. The inlet-to-exit relative velocity diffusion ratio and the blade loading were provided to maximize the flow rate and to minimize the surge flow rate. The design flow rate, rpm, were selected same for both impellers. Test results showed that for the compressor stage with a ruled impeller, the efficiency was increased by 0.32% with an extended surge margin without a reduction in the pressure ratio as compared to the impeller with the sculptured design. It was concluded that an increased relative velocity diffusion coupled with a large backsweep angle was an effective way to improve the compressor stage efficiency. Additionally, an appropriate blade loading distribution was important for achieving a wide operating range and higher efficiency.

• 대한공간정보학회지
• /
• 제20권3호
• /
• pp.57-63
• /
• 2012

정규최소자승법(OLS : Ordinary Least Square)은 장수인구의 지역적 분포와 적용된 환경변수들의 관계가 공간상에서 동일하다고 가정한다. 따라서 장수현상이나 그와 관련된 변수의 공간적 특성을 충분히 설명할 수 없다. 지리가중 회귀분석(GWR : Geographically Weighted Regression)모형은 지리적 가중 함수를 통해 인접지역들의 공간적 유사성을 대변할 수 있다. 또한 환경특성에 따른 장수인구분포의 공간적 변이를 국지적으로 설명할 수 있는 특징이 있다. 이러한 관점에서 본 논문은 기존의 연구에서 제시된 장수의 환경생태학적 요인들에 대해 보통 최소자승법과 GWR모델간의 비교분석을 수행하였다. 연구결과 GWR모형이 OLS모형보다 높은 모형 부합도를 가지고 특정 환경 변수가 가지는 효과에 대한 공간적 변동성을 설명할 수 있는 것으로 나타났다.

• 한국재료학회지
• /
• 제23권7호
• /
• pp.392-398
• /
• 2013

A two-pass differential speed rolling(DSR) was applied to a deoxidized low-phosphorous copper alloy sheet in order to form a homogeneous microstructure. Copper alloy with a thickness of 3 mm was rolled to 75 % reduction by two-pass rolling at $150^{\circ}C$ without lubrication at a differential speed ratio of 2.0:1. In order to introduce uniform shear strain into the copper alloy sheet, the second rolling was performed after turning the sample by $180^{\circ}$ on the transverse direction axis. Conventional rolling(CR), in which the rotating speeds of the upper roll and lower roll are identical to each other, was also performed by two-pass rolling under a total rolling reduction of 75 %, for comparison. The shear strain introduced by the conventional rolling showed positive values at positions of the upper roll side and negative values at positions of the lower roll side. However, samples processed by the DSR showed zero or positive values at all positions. {100}//ND texture was primarily developed near the surface and center of thickness for the CR, while {110}//ND texture was primarily developed for the DSR. The difference in misorientation distribution of grain boundary between the upper roll side surface and center regions was very small in the CR, while it was large in the DSR. The grain size was smallest in the upper roll side region for both the CR and the DSR. The hardness showed homogeneous distribution in the thickness direction in both CR and DSR. The average hardness was larger in CR than in DSR.

• 한국농공학회지
• /
• 제8권1호
• /
• pp.1055-1063
• /
• 1966

Ground water hydrology may be defined as the science of the occnrrence, distribution, and movement of water below the surface of the earth. Geohydrology has an identical connotation, and hydrogeology differs only by its greater emphasis on geology. Ground water referred to with out further specification is commonly understood to mean water occupying all the voids with in a geologic stratum. This saturated zone is tobe distinguished from an unsaturated, or aeration zone where voids are filled \yith water and air. Water contained in saturate:! zones is important for engineering works, geologic studies, and water supply developements Conseqently, the occurrence of water in these zones will be emphasized here. Un-saturated zones are usualiy found above saturated zones and extending upward to the ground surface. Because this water includes soil moisture with in the root zone, it is a major concern of agricultlre, botmy and soil science. No rigid demarcation of waters, between the two zones is possible, for they possess an iriterdependent boundary and water can move from zone to zone in either science, including eology, hydrology, meteorology, and oceanography are concerned with earths water, but ground water hydrology may be regarded as a specialized science combining elements of geology, hydrology, and fluid mechanics. Geology governs the occurrence and distribution of ground water, hydrology determines the supply of water to the ground, and fluid mechanics explains its movement. To provide maximum development of grofnd water resources. for benefical use requires thinking in terms of an entire ground water basin. In order to inorease the natural supply of ground water, man has attempted to artifially recharge ground water basins. Coastal aquifers come in contact with the ocean at seawater of the coastline. Fresh ground water is discharged in to the ocean. the seaward flow of ground water has been decreased or even reversed, Sea water penettating in land in aquifer.

• 한국수자원학회논문집
• /
• 제35권6호
• /
• pp.763-777
• /
• 2002

본 연구의 목적은 간헐 수문사상인 시간강수계열의 구조적 특성을 고찰하여 강수량 모의발생을 위한 추계학적 모형을 개발하는 것이다. 이를 위하여 본 연구에서는 강수발생과정에 대한 추계학적 모형은 이재준과 이정식(2002)이 개발한 추계학적 모형을 이용하였으며, 강수량과정을 위하여 사상내의 시간강수량을 비정상 1차 자기회귀모형으로 기술하였다. 시간강수계열의 강수발생과정과 강수량과정을 조합하면 시간강수사상의 발생패턴과 사상기간내의 강수의 종속구조를 모의할 수 있는 시간강수계열에 대한 모의모형이 얻어지며, 이 모형의 적합성을 구명하기 위해 서울을 대상으로 하여 실적강수자료를 분석하였다. Monte Carlo 모의결과는 모형이 사상기간내의 강수강도, 지속 기간, 크기의 주변 및 조건부 분포를 잘 재현하고 있음을 보여주었다. 실적 및 모의 자료에 대한 자기상관함수도 비교적 작은 시간지체에서는 유사하였다

• 한국방재학회 논문집
• /
• 제11권2호
• /
• pp.31-37
• /
• 2011

다상 재료는 상(phase) 분포의 차이에 따라 재료의 특성이 다르기 때문에 상 분포 상태의 특성을 이해하는 것이 중요하다. 본 연구에서는 확률 분포 함수를 사용하여 미세구조의 상 분포 상태를 나타내고, 이를 사용한 미세구조 재구성 방법을 이용해서 특정 2상 미세구조와 통계적으로 유사한 상 분포를 가진 미세구조를 생성하여 기존의 미세구조와 재구성된 미세구조의 특성을 비교하였다. 그리고 서로 다른 임의의 상 분포를 가진 미세구조들에 유한요소해석 기법을 적용하여 서로 다른 하중 방향에 대한 미세구조의 역학적 거동을 분석하였다. 이를 통해, 미세구조 재구성 방법을 사용하여, 제한된 정보만을 이용해서 통계적으로 유사한 특성을 나타내는 미세구조를 모델링 할 수 있음을 확인하였고, 확률 분포 함수와 미세구조의 역학적 거동이 방향에 따라 동일함을 통하여 재생성 된 재료의 등방성을 확인하였다.

• The Journal of Advanced Prosthodontics
• /
• 제13권2호
• /
• pp.79-88
• /
• 2021

Purpose. To assess peri-implant stress distribution using finite element analysis in implant supported fixed partial denture with occlusal schemes of cuspally loaded occlusion and implant protected occlusion. Materials and methods. A 3-D finite element model of mandible with D2 bone with partially edentulism with unilateral distal extension was made. Two Ti alloy identical implants with 4.2 mm diameter and 10 mm length were placed in the mandibular second premolar and the mandibular second molar region and prosthesis was given with the mandibular first molar pontic. Vertical load of 100 N and and oblique load of 70 N was applied on occlusal surface of prosthesis. Group 1 was cuspally loaded occlusion with total 8 contact points and Group 2 was implant protected occlusion with 3 contact points. Results. In Group 1 for vertical load, maximum stress was generated over implant having 14.3552 Mpa. While for oblique load, overall stress generated was 28.0732 Mpa. In Group 2 for vertical load, maximum stress was generated over crown and overall stress was 16.7682 Mpa. But for oblique load, crown stress and overall stress was maximum 22.7561 Mpa. When Group 1 is compared to Group 2, harmful oblique load caused maximum overall stress 28.0732 Mpa in Group 1. Conclusion. In Group 1, vertical load generated high implant stress, and oblique load generated high overall stresses, cortical stresses and crown stresses compared to vertical load. In Group 2, oblique load generated more overall stresses, cortical stresses, and crown stresses compared to vertical load. Implant protected occlusion generated lesser harmful oblique implant, crown, bone and overall stresses compared to cuspally loaded occlusion.

• 한국통신학회논문지
• /
• 제25권4B호
• /
• pp.635-639
• /
• 2000

상관도가 있는 주파수 선택적 나까가미 페이딩 채널에서의 2D-RAKE 수신기의 평균 비트 에러율을 구하여 성능을 분석하였다. 동일한 RAKE 핑거의 배열 안테나에 수신되는 신호들은 동일한 페이ELD 파라메터를 가지지만 서로 다른 평균 신호 대 잡음비를 갖는 것으로 가정하였다. 또한 서로 다른 RAKE 핑거에 수신되는 신호들은 서로 독립적이지만 서로 다른 평균 신호 대 잡음비를 가지고 서로 다른 페이딩 파라메터를 갖는다고 가정하였다. 위의 분석을 통하여 결합되는 다이버시티 브랜치 간의 상관 특성, 지연 확산 특성, 평균 신호 대 잡음비 분포 그리고 페이딩 파라메터들이 2D-RAKE 수신기의 성능에 밀접한 영향을 줌을 확인하였다.

• Journal of Mechanical Science and Technology
• /
• 제20권4호
• /
• pp.545-553
• /
• 2006

Generally, the temperature drop under $0^{\circ}C$ on vaporizer surface creates frozen dews. This problem seems to increase as the time progress and humidity rises. In addition, the frozen dews create frost deposition. Consequently, heat transfer on vaporizer decreases because frost deposition causes adiabatic condition. Therefore, it is very important to solve this problem. This paper aims to study of the optimum design of used vaporizer at local LNG station. In this paper, experimental results were compared with numerical results. Geometries of numerical and experimental vaporizers were identical. Studied parameters of vaporizer are angle between two fins $(\Phi)$ and fin thickness $(TH_F)$. Numerical analysis results were presented through the correlations between the ice layer thickness $(TH_{ICE})$ on the vaporizer surface to the temperature distribution of inside vaporizer $(T_{IN})$, fin thickness $(TH_F)$, and angle between two fins $(\Phi)$. Numerical result shows good agreement with experimental outcome. Finally, the correlations for optimum design of vaporizer are proposed on this paper.

• 한국의류학회지
• /
• 제31권2호
• /
• pp.225-235
• /
• 2007

The purpose of this study is to grasp the character of consumers and the situation of domestic kidult fashion market. By grasping the distribution of kidult generation and the factors of product-selection based on products images, this research could be a substantial data to kidult associated company product planning and marketers. Subjects for this study were 213 Daegu women from 20 to 30 yearn of age who have high propensity to kidult. The statistical treatment of material used by SPSS 1.0 program consists of frequency analysis, factor analysis, multiple regression analysis, cluster analysis, and t-test. As a results, the characteristics of kidult consumers are classified as six factors. On image toward of kidult fashion goods, there was a significant difference 20 and 30 aged generation. According to fashion goods group, each group recognized on image of fashion products as follow: Group A is 'fancy', group B is 'childish', group C are 'familiarity', group D was recognized as 'fancy' and was identical to A on adjective expression, but was different A on recognition. All consumer characteristics of fun, character, girlish, nostalgia have a significant relation with the recurrence of products selection factor, and its order was character, girlish, nostalgia, and fun.