• Journal of Nutrition and Health
• /
• v.37 no.3
• /
• pp.193-201
• /
• 2004

The objective was to evaluate the factors influencing on the growth of children aged 3 - 6 years by mini dietary assessment and anthropometric indices in 556 children and by analyzing mineral contents of hair from 273 children by inductively coupled plasma mass spectrometry (ICP-MS). The mean concentration of zinc (Zn) in hair was 68.9 $\pm$ 31.1 ppm and the zinc level of 91 ％ children was less than 60％ of the reference value of 180 ppm. The mean content of lead (Pb) in hair was 1.76 $\pm$ 1.20 ppm, but only 67％ of 273 children was within the reference value of 2 ppm and the lead level of 33％ of children was 2 - 4 times higher than the reference value. The level of Zn was negatively correlated with Pb content (r = -0.305, p 〈 0.01). Hair Zn content, regardless of age, was significantly positively correlated with height (r = 0.214) and body weight (r = 0.159). The height of 95.3％ children was belonged to the normal range of 90 - 109.9％ of standard value and the body weight of 49.8％ children was in the range of 90 - 109.9％ of standard value. However, 8.1 ％ children was overweighted (110 - 119.9％ of standard) and 9.4％ children was obese (120 - 149.9％ of standard) and 0.9％ children was severe obese (〉 150％) which resulted in total 10.3％ obese. Contrary to our expectation, 32.8％ children was underweight (70 - 89.9％ of standard) and 36％ of the underweight children showed the low content of zinc (10 - 49 ppm) in hair. There was no significant correlation between dietary intake of Zn and hair Zn content. Hair Zn content was low even though children consumed greater than 75％ of their requirement for zinc. Regardless of dietary intake of Zn, hair Zn level was rather negatively correlated to the content of Pb in hair. 38.8％ children had an unbalanced diet which resulted in lower intake of calorie, Ca, Zn, vitamin B$_2$ compared with those consuming variety of foods. Therefore, it would be needed that new approach for nutrition education to improve eating habit having the unbalanced diet in preschool children. It might be also suggested to develop new food products to complement the nutrients of Zn, Ca, Fe as snacks or dietary supplement for Korean preschool children.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2003.05a
• /
• pp.55-55
• /
• 2003

최근 높은 해상도의 평판 디스플레이 장치 특히 차세대 TFT-LCD를 개발하기 위해서는 건식식각공정의 개발이 필수 불가결하며 이는 플라즈마 공정장치의 대면적화가 가능해야 한다. 따라서 산업계는 이러한 제조 조건에 알맞는 대면적 플라즈마 반응기 개발을 추구하고 있다. 이를 위해서는 건식식각공정의 개발이 필수 불가결하며 이를 위해선 플라즈마 공정장 치의 대면적화가 가능해야 한다. 이러한 대면적 공정을 위해서는 낮은 공정압력, 고밀도, 높은 플라즈마 균일도가 요구된다. 또한 이러한 대면적 고밀도 플라즈마에의 적용을 위하여 새로운 유도결합형 플라즈마 소오스의 개발이 진행되고 있으며, 안정적인 300mm웨이퍼 공정을 위하여 여러 형태의 안테나가 연구되어지고 있다. 그러나 차세대 TFT-LCD에 적용 가 능하게끔 기존의 ICP 소오스를 직접적으로 대면적화 하는데 있어서는 안테나의 인덕턴스의 값이 키지며, 유전물질의 두께 증가 및 그에 따른 재료비의 상슴에 의해 그 한계점을 나타 내었다. 본 연구에서는 차세대 TFT-LCD 및 POP 대면적 공정에 적용 가능한 고밀도 플라즈마를 발생시키기 위해서 내장형 유도결합형 선형 안테나를 사용하였다. 내장형 유도결합형 선형 안테나가 가지고 있는 고유의 정전기적 결합효과를 최소화시키기 위해 직사각형모양의 플라즈마 챔버(830mm*1,020mm)에서 영구자석을 사용하였다. 영구자석을 사용하여 외부자 장을 인가하였을 때가, 그럴지 않은 때보다 RF 안테나에 걸리는 코일의 전압을 낮춰주었으며, 영구자석의 배열에 따라 코일의 인덕턴스의 값이 크게 변함을 알 수 있었다. 그리고, 최적화된 자장의 배열은 플라즈마의 이온밀도를 증가시켰으며, 플라즈마 균일도 또한 10% 이 내로 유지됨을 알 수 있었다. 따른 식각 메커니즘에 대하여 알아보고자 하였다. $CF_4/Cl_2$ gas chemistry 에 첨 가 가스로 $N_2$와 Ar을 첨 가할 경 우 텅 스텐 박막과 하부 layer 간의 etch selectivity 증가는 관찰되지 않았으며, 반면에 첨가 가스로 $O_2$를 사용할 경우, $O_2$의 첨가량이 증가함에 따라 etch s selectivity 는 계속적으로 증가렴을 관찰할 수 있었다. 이는 $O_2$ 첨가에 따라 형성되는 WOF4 에 의한 텅스텐의 etch rates 의 감소에 비하여, $Si0_2$ 등의 형성에 의한 poly-Si etch rates 이 더욱 크게 감소하였기 때문으로 사료된다. W 과 poly-Si 의 식각 특성을 이해하기 위하여 X -ray photoelectron spectroscopy (XPS)를 사용하였으며, 식각 전후의 etch depth 를 측정하기 위하여 stylus p pmfilometeT 를 이용하였다.X> 피막이 열처리 전후에 보아는 기계적 특성의 변화 양상은 열역학적으로 안정한 Wurzite-AlN의 석출에 따른 것으로 AlN 석출상의 크기에 의존하며, 또한 이러한 영향은 $(Ti_{1-x}AI_{x})N$ 피막에 존재하는 AI의 함량이 높고, 초기에 증착된 막의 업자 크기가 작을 수록 클 것으로 여겨진다. 그리고 환경의 의미의 차이에 따라 경관의 미학적 평가가 달라진 것으로 나타났다.corner$적 의도에 의한 경관구성의 일면을 확인할수 있지만 엄밀히 생각하여 보면 이러한 예의 경우도 최락의 총체적인 외형은 마찬가지로

• Resources Recycling
• /
• v.29 no.1
• /
• pp.25-34
• /
• 2020

Electrochemical Quartz Crystal microbalance is a tool that is capable of measuring nanogram-scale mass change on electrode surface. When applying alternating voltage to the quartz crystal with metal electrode formed on both sides, a resonant frequency by inverse piezoelectric effect depends on its thickness. The resonant frequency changes sensitively by mass change on its electrode surface; frequency increase with metal dissolution and decrease with metal deposition on the electrode surface. The relationship between resonant frequency and mass change is shown by Sauerbrey equation so that the mass change during metal dissolution can be measured in real time. Especially, it is effective in the case of reaction mechanism and rate studies accompanied by precipitation, volatilization, compound formation, etc. resulting in difficulties on ex-situ AA or ICP analysis. However, it should be carefully considered during EQCM experiments that temperature, viscosity, and hydraulic pressure of solution, and stress and surface roughness can affect on the resonant frequency. Application of EQCM was shown as a case study on leaching of platinum using aqueous chlorine for obtaining activation energy. A platinum electrode of quartz crystal oscillator with 1000 Å thickness exposed to solution was used as leaching sample. Electrogenerated chlorine as oxidant was purged and its concentration was controlled in hydrochloric acid solution. From the experimental results, platinum dissolution by chlorine is chemical reaction control with activation energy of 83.5 kJ/mol.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.6
• /
• pp.1063-1067
• /
• 1997

This study was performed to assess the levels of the trace elements(Fe, Cu, Zn, Cr, Co, Mn, Pb, and Cd) in salt-fermented fish products from some areas of the west coast in Korea. Seven samples were Shrimp(Seawoo-jeot), Clam(Jogai-jeot), Oyster(Orikul-jeot), big eyed horring(Bendeng-ie jeot), Mysis(Gonjeng-ie jeot), Hwangandali(Hwangsegi-jeot), and Squid, Han Chi(Han chi-jeot). They were ashed with ternary solution. After ashing the samples, the amount of trace elements in the samples were measured by ICP. The moisture content of the 7 samples before freezing dry were 68.36, 71.52, 81.19, 62.27, 71.30, 64.27, and 66.74%, respectively. Jogai-jeot and Gonjeng-ie jeot contained the most amount of moisture among the samples. Fe contents were 66.46, 309.10, 27.03, 23.01, 132.45, 35.75, and 9.72ppm, respectively. Jogai-jeot contained the most amount of Fe among the samples. Cu contents were 4.60, 4.36, 3.75, 2.21, 10.36, 2.71, and 58.15ppm, respectively. Hanchi-jeot contained the most amount of Cu among the samples. Zn contents were 16.02, 75.06, 37.43, 28.43, 132.45, 35.75, and 9.72ppm, respectively. Gonjeng-ie jeot contained the most amount of Zn among the samples. Cr contents were 0.80, 1.61, 0.84, 0.96, 1.12, 0.96, and 0.59ppm, respectively. Jogai-jeot contained the most amount of Cr among the samples. Co contents were 0.13, 0.54, 0.31, 0.46, 0.50, 0.63, and 0.35ppm, respectively. Hwangsegi-jeot contained the most amount of Co among the samples. Mn contents were 7.30, 10.69, 14.87, 4.12, 8.03, 2.94 and 1.54ppm, respectively. Origkul-jeot contained the most amount of Mn among the samples. Pb contents were 1.80, 4.30, 2.53, 4.61, 3.08, 5.04, and 2.74ppm, respectively. Hwangsegi-jeot contained the most amount of Pb among the samples. Cd contents were 0.005, 0.03, 0.06, 0.005, 0.01, 0.00, and 0.10ppm, respectively. Hanchi-jeot contained the most amount of Cd among the samples. This study is limited within 7 samples caught and producted from the some areas of the west coast in Korea. Therefore, I hope there will be broader experiments concerned with this study to make clear not only nutritional aspect(the contents of Fe, Cu, Zn, Cr, Co, and Mn) but also toxicological aspect(the contents of Pb and Cd).

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.6
• /
• pp.1080-1084
• /
• 2011

Predictive model for estimating total contents of cadmium (Cd) and lead (Pb) was developed by stepwise multiple-regression analysis using chemical properties and extractable contents of metal in paddy soil adjacent to abandoned mines in 2009 and 2010. Soil properties, e.g. pH, electrical conductivity (EC), organic matter (OM), available phosphorus ($P_2O_5$), and exchangeable cations (i.e. Ca, Na, K, Mg) were measured. Total contents of Cd and Pb as well as extractable contents of metals were analyzed by ICP-OES. Results showed that the total and extractable contents were estimated to be 3.55 and $0.27mg\;kg^{-1}$ in Cd and 83.38 and $24.32mg\;kg^{-1}$ in Pb on the average. From stepwise analysis, it was found that the contents of extractable Cd, Zn, Cu, as well as exchangeable Na were significantly influenced on estimation of the total contents of Cd in soil. Moreover, it also showed that the contents of extractable Pb, Zn, and Cu significantly affected estimation of the total contents of Pb in soil. More significant relationship between estimated and measured value in total contents of Pb was observed than those of Cd ($R^2$=0.87, p<0.0001). This demonstrates that extractable contents of metal are influenced more on estimation of total contents of Cd and Pb in soil than soil properties.

• Journal of Environmental Health Sciences
• /
• v.45 no.3
• /
• pp.238-246
• /
• 2019

Objective: The purpose of this study was to investigate the distribution of mineral components, health and taste index for water supply plants, spring water located in northern Gyeonggi area and bottled waters in market to analyze Ca, K, Mg Na, Si, $F^-$ and $SO_4{^{2-}}$. Method: The samples were source and tap water in 15 water supply plants over 9 river basin, 172 spring water and 20 bottled water. The Ca, K, Mg Na and Si were analyzed by ICP-OES. The $F^-$ and $SO_4{^{2-}}$ were determined by Ion Chromatograph. Then, taste and health index were calculated using Hashimoto equation. Results: The average concentration of major minerals showed in same order of Ca > Na > Mg > K for all kinds of drinking water from water supply plants, spring waters and bottled waters. Total concentration of major minerals (Ca, K, Mg, Na) was calculated that showed 26.79 mg/L of tap water, 21.81 mg/L of spring water, 32.94 mg/L of bottled water on average. So, the spring waters indicated the lowest minerals sum. The tap water from water supply plants was categorized to Group I, II for 33.3, 44.4% according to K-index and O-index. Otherwise, spring water was classified as Group I, II for 44.0, 46.3%. Conclusion: According to the results of K and O-index, water from water supply plant showed higher K-index which means good for the health. Otherwise, spring water indicated higher O-index that people can feel more delicious than tap water. Futhermore, the mineral distribution of source water from water supply plants and spring water had indicated high correlation with geological effect.

• Journal of Applied Biological Chemistry
• /
• v.61 no.4
• /
• pp.391-395
• /
• 2018

There is an increasing concern over arsenic (As) contamination of paddy soil and rice with regard to food safety. This study was conducted to investigate total and inorganic As concentration in one hundred husked and polished rice samples collected at the non-contaminated paddy soil in Korea. Arsenic species in rice samples were extracted using 1% nitric acid ($HNO_3$) with a microwave oven and were measured using high performance liquid chromatography coupled with inductively coupled plasma-mass spectrometry. Mean concentrations of total As in husked rice and polished rice were 0.18 and $0.11mg\;kg^{-1}$, respectively. Also, average inorganic As concentrations in husked rice and polished rice were 0.11 and $0.07mg\;kg^{-1}$, respectively. These levels are lower than the standard guideline value 0.35 and $0.2mg\;kg^{-1}$ for inorganic As in husked and polished rice recommended by Codex Committee on Contaminants in Foods and Ministry of Food and Drug Safety, respectively. The mean of the inorganic As ratio for the total amount of As was 0.65 and 0.67 for husked rice and polished rice, respectively, and the range was from 0.08 to 1.0. For health risk assessment, the average value of cancer risk probability was $9.24{\times}10^{-5}$ and ranged from $2.30{\times}10^{-5}$ to $1.90{\times}10^{-5}$. Therefore, human exposure to As through dietary intake of surveyed rice samples might considered to be a low health risk.

• Korean Journal of Environmental Agriculture
• /
• v.38 no.2
• /
• pp.96-103
• /
• 2019

BACKGROUND: This study was conducted to develop selenium (Se)- and germanium (Ge)-enriched rice by foliar spray application of organic or inorganic Se and Ge. METHODS AND RESULTS: The time and frequency of organic or inorganic Se and Ge treatment were performed at the five main growth stages as followings: effective tillering stage (E), maximum tillering stage (M), booting stage (B), heading stage (H), grain filling stage (G). The main treatment plots were consisted of (1) 'once' treatment (at each E, M, B, H, G stage, Se/Ge single apply), (2) 'twice I' (at H + G stages, organic or inorganic Se/Ge apply), (3) 'twice II' (at H + G stages, mixture apply of Se + Ge + pesticide). The organic or inorganic Se treatment concentration was 20 and 40 ppm, and the Ge was 50 and 100 ppm. The Se and Ge contents in rice grain (brown rice and polished rice) were analyzed by inductively coupled plasma (ICP). The highest Se content was noted in brown rice 'twice I' with Se 40 ppm (1394.06) at H + G stages, but the lowest was in 'once' with Se 40 ppm ($367.79{\mu}g{\cdot}kg^{-1}$) at B stage. The highest of Se content in polished rice was found in 'twice I' of Se 40 ppm (1090.25) at H + G stages, but the lowest was in 'once' with Se 40 ppm ($403.53{\mu}g{\cdot}kg^{-1}$) at E stage. On the other hand, The highest of Ge content in brown rice was found in 'twice I' with Ge 100 ppm (398.66) at H + G stages, but the lowest was in 'once' with Ge 100 ppm ($139.64{\mu}g{\cdot}kg^{-1}$) at B stage. The highest of Ge content in polished rice was found in 'twice I' of Ge 100 ppm (300.29) at H + G stages, but the lowest was in 'once' with Ge 100 ppm ($142.24{\mu}g{\cdot}kg^{-1}$) at B stage. CONCLUSION: Se and Ge contents both in brown rice and polished rice treated with organic Se and Ge forms were higher than those of inorganic Se and Ge. Overall results concluded that the supplementation of organic Se and Ge contents in brown and polished rice contents were comparatively higher than the inorganic Se and Ge. This is results also proved that the foliar spray application of organic Se and Ge has positive nutritive effect on the rice for regular consumption.

• Clean Technology
• /
• v.27 no.3
• /
• pp.240-246
• /
• 2021

The waste etching solution for chip on film (COF) contained about 3.5% copper, and it was recovered through cementation using iron samples. The effect of cementation with plate, chip, and powder iron samples was investigated. The molar ratio (m/r) of iron to copper was used as a variable in order to increase the recovery rate of copper. As the molar ratio increased, the copper content in the solution rapidly decreased at the beginning of the cementation reaction. Before and after the reaction, the copper content of the solution was determined by Inductively Coupled Plasma (ICP) using copper concentration according to time. After cementation at room temperature for 1 hour, the recovery rate of copper had increased the most in the iron powder sample, having the largest specific surface area of the samples, followed by the chip and plate samples. The recovered copper powder was characterized for its crystalline phase, morphology, and elemental composition by X-ray diffraction (XRD), scanning electron microscopy (SEM), and Energy-dispersive X-ray spectroscopy (EDS), respectively. Copper and unreacted iron were present together in the iron powder samples. The optimum condition for recovering copper was obtained using iron chips with a molar ratio of iron to copper of 4 giving a recovery rate of about 98.4%.

• Applied Chemistry for Engineering
• /
• v.22 no.2
• /
• pp.167-172
• /
• 2011

In this work, the effect of surface treatment on mesoporous carbons (MCs) supports was investigated by analyzing surface functional groups. MCs were prepared by a conventional templating method using mesoporous silica (SBA-15) for using catalyst supports in direct methanol fuel cells (DMFCs). The MCs were treated with different phosphoric acid ($H_3PO_4$) concentrations i.e., 0, 1, 3, 4, and 5 M at 343 K for 6 h. And then Pt-Ru was deposited onto surface treated MCs (H-MCs) by chemical reduction method. The characteristics of Pt-Ru catalysts deposited onto H-MCs were determined by specific surface area and pore size analyzer, X-ray diffraction, X-ray photoelectron, transmission electron microscopy, and inductive coupled plasma-mass spectrometer. The electrochemical properties of Pt-Ru/H-MCs catalysts were also analyzed by cyclic voltammetry experiments. From the results of surface analysis, an oxygen functional group was introduced to the surface of carbon supports. From the results, the H4M-MCs carbon supports surface treated with 4 M $H_3PO_4$ led to uniform dispersion of Pt-Ru onto H4M-MCs, resulting in enhancing the electro-catalytic activity of Pt-Ru catalysts.