• Journal of dental hygiene science
• /
• v.12 no.4
• /
• pp.320-328
• /
• 2012

The purpose of this study was to evaluate the tooth whitening and properties of an enamel surface after treatments with tooth bleaching agents that contained dicalcium phosphate dihydrate (DCPD) and hydrogen peroxide (HP). Thirty specimens were obtained from fifteen premolar and were randomly divided into three groups (n=10): 1, 3.5% HP + 0 g DCPD; 2, 3.5% HP + 0.1 g DCPD; 3. 3.5% HP + 1 g DCPD. All groups were bleached 8 hours per day for 14 days. With increasing DCPD concentration, the pH values in the agents increased, making it less acidic. However, there was no statistically significant difference (p>.05). As the concentration of DCPD was increased, the concentration of Ca and P was also increased. In all groups, after the tooth whitening, the tooth color was found to have a value of $L^*$ (p<.05). All groups showed significantly decreased enamel microhardness compared to their baseline (p<.05). The percentage microhardness loss (PML) of the group A1 and A2 were significantly lower than that of group A3. The obvious variation of morphology was observed on enamel surfaces in group A1. Following an analysis of the constituents of enamel surface after bleaching, as DCPD content was increased, the amount of Ca and P was increased. In this study, the experimental results suggest that DCPD/HP agent less demineralization changes such as the erosion morphology and hardness loss without compromising whitening efficiency.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.12
• /
• pp.8-13
• /
• 2001

Cerium oxide ($CeO_2$) thin film has been proposed as a buffer layer between the ferroelectric thin film and the Si substrate in Metal-Ferroelectric-Insulator-Silicon (MFIS) structures for ferroelectric random access memory (FRAM) applications. In this study, $CeO_2$ thin films were etched with $Cl_2$/Ar gas mixture in an inductively coupled plasma (ICP). Etch properties were measured for different gas mixing ratio of $Cl_2$($Cl_2$+Ar) while the other process conditions were fixed at RF power (600 W), dc bias voltage (-200 V), and chamber pressure (15 mTorr). The highest etch rate of $CeO_2$ thin film was 230 ${\AA}$/min and the selectivity of $CeO_2$ to $YMnO_3$ was 1.83 at $Cl_2$($Cl_2$+Ar gas mixing ratio of 0.2. The surface reaction of the etched $CeO_2$ thin films was investigated using x-ray photoelectron spectroscopy (XPS) analysis. There is a Ce-Cl bonding by chemical reaction between Ce and Cl. The results of secondary ion mass spectrometer (SIMS) analysis were compared with the results of XPS analysis and the Ce-Cl bonding was monitored at 176.15 (a.m.u). These results confirm that Ce atoms of $CeO_2$ thin films react with chlorine and a compound such as CeCl remains on the surface of etched $CeO_2$ thin films. These products can be removed by Ar ion bombardment.

• Journal of the Mineralogical Society of Korea
• /
• v.28 no.1
• /
• pp.51-60
• /
• 2015

We applied gemological analytical approaches on Aquamarine from the Gilgit-Baltistan of Northern Areas, Pakistan. The standard gemological testing indicates that they are consistent with general characteristics of natural aquamarines. We have identified the inclusions of Tantalite-Mn by Raman analysis. It indicates that they occurs in association with the veins of Be-rich coarse pegmatite. And the results of chemical analyses, infrared absorption spectroscopy and Raman spectroscopy indicate that $H_2O$ molecules in channel mostly exist in Type-I and a little Type-II with low alkali ion. The comparison of relative peak intensity of FT-IR analysis can be used for prediction of $Na_2O$ content within not only emerald but also aquamarine.

• Analytical Science and Technology
• /
• v.27 no.1
• /
• pp.11-21
• /
• 2014

An investigation of grain size, organic compounds and metal distribution in 23 sediment samples of the Geum-River basin (Korea) was conducted in two seasons of 2012 (dry season and rainy season). The samples of sediment were collected from the basin and investigated for concentrations of some metal and general indexes containing grain size. Concentrations of Pb, Zn, Cu, Cr, Ni, As, Cd, Hg, Al and Li have been determined by inductively coupled plasma spectrometer (ICP) and the sediments organic matter content was determined by the loss on ignition, and sediments were fractionated with three different nylon sieves. Correlation analysis was made for grain size, organic material and metal concentrations, and the Pearson correlation coefficients between their concentrations were determined. As a result, the higher metal concentrations were found in the period of the dry season than in another season. The metal concentrations showed high correlation with that of organic material (COD and TOC). Thereby, the high distribution of metal concentrations in sediment containing high organic compound is suggesting an interaction with organic matter.

• Journal of Environmental Health Sciences
• /
• v.46 no.3
• /
• pp.267-275
• /
• 2020

Objectives: The causes of dementia have been reported in various ways, but there has been little research on the interrelationship between heavy metals and dementia, and the results also show little consistency. Therefore, it is imperative to compare the levels of heavy metal exposure between the dementia-suffering group and a control group to confirm the correlation between the level of heavy metal exposure and the likelihood of dementia. Methods: In order to assess the dementia level of the elderly, the Global Deterioration Scale (GDS) and Mini Mental State Examination (MMSE) were applied. To analyze the concentration of heavy metals in the blood, blood was collected from the veins of study subjects and measured using Inductively Coupled Plasma-mass spectrometry (ICP-MS). Results: There was a statistically significant correlation between lead and manganese concentrations in the blood and the MMSE and GDS. It was found that there was a statistically significant correlation between cadmium concentration in the blood and the GDS, but the MMSE was less relevant. It was found that the blood mercury concentration and the MMSE and GDS were less relevant. The lead concentration in the blood was 0.95±0.74 ㎍/dL in the dementia patient group and 0.33±0.22 ㎍/dL in the normal group, while cadmium was 0.69±0.37 ㎍/L in the dementia group and 0.18±0.10 ㎍/L in the normal group. Mercury was 0.81±0.31 ㎍/L in the dementia group and 1.16±0.80 ㎍/L in the normal group. Manganese was 6.83±2.01 ㎍/L in the dementia group and 4.78±1.59 ㎍/L in the normal group. All of these show statistically significant differences. Conclusions: As the concentration of lead, cadmium and manganese in the blood increases, the MMSE scores and GDS scores were found to worsen, and it was confirmed that there is a correlation between heavy metal exposure and cognitive degradation.

• Journal of the Korean Electrochemical Society
• /
• v.18 no.1
• /
• pp.17-23
• /
• 2015

$Li_4Ti_5O_{12}$ (LTO) have attracted much attention of researchers in the field of energy storage, because of their excellent stability for electric vehicle application. A main drawback of LTO is however their insulating nature due to the wide bandgap, which should be addressed to enhance the battery performance. In this study, we investigated the effect of water solubility of dopant precursor on the electrochemical characteristics of conducting LTO prepared by doping with $Cr^{3+}$ ions with the well-known wet-mixing method. The solubility of dopant precursor directly affected the morphology and the phase of doped LTO, and therefore their battery performance. In the case of employing the most soluble dopant precursor, $Cr(NO_3)_2$, the doped LTO demonstrated a markedly enhanced discharge capacity at high C-rate (130mAh/g @ 10C), which is about 2 times higher value than that of bare LTO.

• Journal of Conservation Science
• /
• v.9 no.1
• /
• pp.1-10
• /
• 2000

In 1993, many bronze artifacts were excavated from the Sanoesa Temple(思惱寺), Chongju, Chungbuk. Twelve items were selected and chemically analyzed with AA Spectrometry and ICP-Atomic Emission Spectrometry. They were also observed under the optical microscopy and SEM. According to the results from chemical analysis, production method and use, these artifacts were classified into four groups: casting, wrought and welding products, and bells. Cast products, probably used for ritual, were alloy of 70% Cu, 10% Sn and 20% Pb. They showed ${\alpha}+{\beta}$ phase as a typical microstructure of casting. The ${\delta}$ phase was rarely observed due to the small amount of Sn. These artifacts included more lead than other alloys. They showed segregation like island-shape on the lead part. Wrought products used for daily too1s. were alloy of 80% Cu and 20% Sn. Since they were consist of ${\alpha}$ phase and martensite ${\beta}$ phase, it could be presumed that they were heat-treated. The production method could be identified from twinned grains in ${\alpha}$ phase. Lead was not included in because it had a bad effect to alloy. The bells were alloyed with 85% Cu, 10% Sn, 5% Pb or 90% Cu and 10% Sn. They show the dendrite structure because they were cast and alloyed with many tin. Weldinged were alloyed with 83% Cu, 12% Sn and 5% Pb. lt showed the fine dendrite structure because of fast cooling in air.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.1
• /
• pp.31-37
• /
• 2017

In this paper, we implemented for the development of a high output induction lamp system, which lamp design is optimized by gas type, mixing ratio, pressure and discharge tube size, amalgam type and mixing ratio, and characteristics of ferrite core in the lamp. It's the circuit design by improving the power factor and efficiency according to the driving method, which has analyzing the characteristics according to the waveform and frequency. Finally, luminaries design part for applying the optimal lighting system considering the surrounding environment, the characteristics of the lighting circuit for electrodeless lamp has analyzed and the improvement has been proceeded. In conclusion, the driving frequency has optimized at 135kHz with degrading $7{\sim}10^{\circ}C$ based on the results of the optical characteristics of the induction lamp on peak noise FET(Q3,Q4) damage.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.6
• /
• pp.853-859
• /
• 2009

Endometriosis becomes the most common cause of pelvic pain and infertility women. The cause of endometriosis has ever been entirely proven. However, an increased use of commercial feminine hygiene products such as tampons and sanitary napkins was considered one of the major affect. Harmful substances in feminine hygiene products was analyzed and evaluated. Samples of commercial products obtained from Korea, Japan, America, Germany, and China were analyzed for six hazardous inorganic elements (chromium, cobalt, nickel, copper, cadmium and lead). In the extractable heavy metals of napkins, Cr, Ni and Cu were found in all of the samples, while Cd was detected only in two samples. In the tampons, Cr, Ni and Cu were found in all of the samples. The presence of Co and Cd was not detected in all samples The concentrations of extractable heavy metals in the tampons were lower than those in the sanitary napkins. The content of extractable heavy metals in the sanitary products was compared with the criteria of the 100 $\ddot{O}KO$ TEX Standard. It was confirmed that the level of heavy metals in the sanitary products posed no serious risk to health, based on the human-ecological criteria defined by the 100 $\ddot{O}KO$ TEX Standard.

• Journal of the East Asian Society of Dietary Life
• /
• v.7 no.4
• /
• pp.512-518
• /
• 1997

This study was performed to determine the amount of aluminum, which is one of the factors of Alzheimer's disease, In some fishes caught from some areas of the west coast in Korea. The 46 aquatic products were composed of fishes, molluscs, and salt-fermented products (jeot-gal). The 24 fishes were Hickory shad, Gobies, Pomfref, Atkafish, Flounder, Jambeng-ie Monk fish, Yellow hair tail, Mackerel, Bartailed flathead, Alaska pollack, Brown croaker, Eel, Fine-spotted flounder, Black spotted grouper, Sea-eel, Pacific saury, Areliscus honaleus, Small boil-dried anchovy, Croaker, Hair tail, Sea bream genuine, Motleystrip rainbowfish, and Bastard halibut. The 15 Molluscs were Whip-arm octopus, Sea arrow, Common squid, Han chi, Cuttle fish, Turban shell, Pond snail, Orient calm, Surf calm, Butter calm, Crib shell, Oyster, Egg cockle, Little neck calm, and Arkshell. The 7 salt-fermented products were salt-fermented Shrimp, Little neck, Oyster, Shad, Gonjeng-ie, Hqangsegi, and Squid. All of them were ashed with 5$m\ell$ HNO$_3$ and then with 10$m\ell$ ternary solution (HNO$_3$ : H$_2$SO$_4$ : HClO$_4$= 10 : 1 : 4). After ashing of the samples, the aluminum amount were measured by ICP. The aluminum amount of molluscs was significantly higher than that of fishes and salt-fermented products(p＜0.01). The aluminum amount of Orient calm and Healak in molluscs were 827.70, 812.55ppm, respectively, which were the most amounts compared nth that of the other samples. But the aluminum amounts of Bartailed flathead and Sea bream, genuine In fishes were 0.98, 0.97ppm, respectively, which were the least amounts compared with that of other samples. This study was limited within 46 aquatic samples, therefore I hope there will be wider efforts to determine about auminum amount in broade range of aquatic foods for the prevention of Alzheimer's disease.