• Bulletin of the Korean Chemical Society
• /
• v.17 no.7
• /
• pp.637-642
• /
• 1996

Preparation and properties of potential CVD (Chemical Vapor Deposition) precursors for the TiO2, a major component of the perovskite materials such as PT, PLT, PZT, and PLZT were investigated. Reactions between β-diketones and TiMe3, formed in situ failed to produce stable Ti(β-diketonate)3 complexes but a stable purple solid, characterized as (OTi(BPP)2)2 (BPP=1,3-biphenyl-1,3-propanedione) was obtained when BPP was used. Several new Ti(Oi-Pr)2(β-diketonate)2 complexes with aromatic or ring substituents were synthesized by the substitution reaction of Ti(OiPr)4by β-diketones and characterized with 1H NMR, IR, ICP, and TGA. Solid complexes such as Ti(Oi-Pr)2(BAC)2 (BAC=1.-phenyl-2,4-pentanedione), Ti(Oi-Pr)2(BPP)2, Ti(Oi-Pr)2(1-HAN)2 (1-HAN=2-hydroxy-1-acetonaphthone), Ti(Oi-Pr)2(2-HAN)2 (2-HAN=1-hydroxy-2-acetonaphthone), Ti(Oi-Pr)2(ACCP)2 (ACCP=2-acetylcyclopentanone), and Ti(Oi-Pr)2(HBP)2 (HBP=2-hydroxybenzophenone) were found to be stable toward moisture and air. Ti(Oi-Pr)2(ACCP)2 and Ti(Oi-Pr)2(HBP)2 were proved to have lower melting points and higher decomposition temperatures. However, these complexes are thermally stable and pyrolysis under an inert atmosphere resulted in incomplete decomposition. Ti(Oi-Pr)2(DPM)2 (DPM=dipivaloylmethane) and Ti(Oi-Pr)2(HFAA)2 (HFAA=hexafluoroacetylacetone) were sublimed substantially during the thermal decomposition. Pyrolysis mechanism of these complexes are dependent on type of β-diketone but removal of Oi-Pr ligands occurs before the decomposition of β-diketonate ligands.

• Journal of The Geomorphological Association of Korea
• /
• v.20 no.3
• /
• pp.55-63
• /
• 2013

The study deals with the geochemical analyses on the stratigraphy and sedimentation of the paleofluvial outcrop under Jeongok basalt layer in Chugaryeong Rift Valley. The results of field survey and analysis show that the paleofluvial sand and gravel layers had been constructed before the arrival of basaltic lava in Jeongok area of Hantan River valley in central Korea. XRF, for the main elements analysis, results present that JG2-3, a test sample from basalt weathering layer, has different characteristics from 5 other samples in the aspects of chemical weathering levels. ICP-MS, for analysis of the rare earth elements analysis, estimates that gravel layer, in the lowest part of the outcrop, had been originated from pre-lava bedrocks near the upper reach of the Hantan River, so the layer is almost not related to basalt layers. Finally, the OSL dating results in paleofluvial sedimentation had been in process until nearly 40,000 BP, before formation of lava plateau in the Jeongok area.

• Proceedings of the Ginseng society Conference
• /
• 2002.10a
• /
• pp.238-252
• /
• 2002

In order to screen out indicators for the discrimination of ginseng habitat, some physical and chemical characteristics of Korean red ginsengs (94 kinds) and Chinese red ginsengs (50 kinds) were analyzed by using a rheometer, an electronic nose system, a combined technique of solid phase micro-extraction (SPME) and gas chromatograph equipped with an electron capture detector (GC/ECD), an X-ray fluorescence spectrometer (XRF), an inductively coupled plasma mass spectrometer (ICP/MS), a near infrared spectrometer (NIRs) and high performance liquid chromatography equipped with evaporative light scattering detector (HPLC/ELSD). The results are summarized as follows: (i) The rhizome strengths of Korean red ginsengs were significantly higher than those of Chinese red ginsengs. (ii) The electronic nose patterns of Korean red ginsengs were significantly different from those of Chinese red ginsengs. (iii) Some unidentified peaks were detected not in the headspace of Korean red ginsengs but in the headspace of Chinese red ginsengs when the headspace volatiles prepared by the SPME technique were analyzed by GC/ECD. (iv) Either the content ratios of K to Ca or Mn to Fe were significantly different between Korean red ginsengs and Chinese red ginsengs. (v) The reflectance ratios of NIRs wavenumbers such as $904\;cm^{-1}\;to\;1088\;cm^{-1}$ for Korean red ginsengs were significantly different from those for Chinese red ginsengs. (vi) The content ratios of ginsenoside-Rg to ginsenoside-Re of Korean red ginsengs were significantly higher than those of Chinese red ginsengs. These results indicate that the rhizome strength, the electronic nose pattern, the occurrence of ECD-sensitive headspace volatile components, the content ratios of K to Ca and Mn to Fe, the NIRs pattern and the content ratio of ginsenoside-Rg to -Re may be indicators for the discrimination of ginseng habitat.

• Macromolecular Research
• /
• v.16 no.3
• /
• pp.204-211
• /
• 2008

A platinum-catalyzed polyelectrolyte porous membrane was prepared by solid-state compression of electrospun polystyrene (PS) fibers and in-situ metallization of counter-balanced ionic metal sources on the polymer surface. Using this ion-exchange metal-polymer composite system, fiber entangled pores were formed in the interstitial space of the fibers, which were surrounded by sulfonic acid sites ($SO_3^-$) to give a cation-selective polyelectrolyte porous bed with an ion exchange capacity ($I_{EC}$) of 3.0 meq/g and an ionic conductivity of 0.09 S/cm. The Pt loading was estimated to be 16.32 wt% from the $SO_3^-$ ions on the surface of the sulfonated PS fibers, which interact with the cationic platinum complex, $Pt(NH_3)_4^{2+}$, at a ratio of 3:1 based on steric hindrance and the arrangement of interacting ions. This is in good agreement with the Pt loading of 15.82 wt% measured by inductively coupled plasma-optical emission spectroscopy (ICP-OES). The Pt-loaded sulfonated PS media showed an ionic conductivity of 0.32 S/cm. The in-situ metallized platinum provided a nano-sized and strongly-bound catalyst in robust porous media, which highlights its potential use in various electrochemical and catalytic systems.

• The Journal of the Petrological Society of Korea
• /
• v.3 no.1
• /
• pp.41-48
• /
• 1994

Three USGS rock standards (G-2, W-2, and BHVO-1) are decomposed by three different methods, such as open beaker, microwave oven, and alkali fusion method, to compare the effect of decomposition methods for trace elememt analysis in the rock samples. Solubilized trace elements are measured with inductively coupled plasma mass spectrometer (ICP-MS). Generally the analytical results of trace elements between open beaker and microwave digestion method are not different. In case of alkali fusion method, some volatile elements such as Pb, Cu, and Rb are considerably lost. Using acid digestion method, Zr and Hf concentrations are lowered in case that these elements are concentrated in refractory minerals. The concentrations of rare earth elements are generally consistent with the recommended values, but due to large dilution factor, there are some analytical problems in alkali fusion method.

• Journal of Sericultural and Entomological Science
• /
• v.50 no.2
• /
• pp.48-52
• /
• 2012

Heavy metals and residual agricultural chemicals in Bombyx mori silkworm cocoon for nontextile usages were examined. Proximate composition of silkworm cocoon was examined; contents of moisture, crude protein, crude fat, and ash were about 5 ~ 6%, 93 ~ 94%, 0.4 ~ 0.5%, and 0.3 ~ 0.4%, respectively. The Heavy metals were analyzed by ICP/MS after acid digestion. Arsenic, cadmium, and lead were not detected. The average contents of mercury, zinc, and cupric were 0.317, 3.99, and 2.06 mg/kg, respectively. Agricultural chemicals, such as dichlorvos and paraquart also were not detected. Silkworm cocoon may be safe used for nontextile applications.

• Tribology and Lubricants
• /
• v.34 no.6
• /
• pp.292-299
• /
• 2018

The objective of this research is to investigate the impact of engine oil aging on PM(Particulate Matter), exhaust gases, and DPF. It is widely known that the specification of a lubricant and its consumption in an ICE considerably influences the release of regulated harmful emissions under normal engine operating conditions. Considering DPF clogging phenomena associated with lubricant-derived soot/ash components, a simulated aging mode is designed for DPF to facilitate engine dynamometer testing. A PM/ash accumulation cycle is developed by considering real-world engine operating conditions for the increment of engine oil consumption and natural DPF regeneration for ash accumulation. The test duration for DPF aging is approximately 300 h with high- and low-SAPs engine oils. Detailed engine lubricant properties of new and aged oils are analyzed to evaluate the effect of engine oil degradation on vehicle mileage. Furthermore, physical and chemical analyses are performed using X-CT, ICP, and TGA/DSC to quantify the engine oil contribution on the PM composition. This is achieved by sampling with various filters using specially designed PM sampling equipment. Using high SAPs engine oil causes more PM/ash accumulation compared with low SAPs engine oils and this could accelerate fouling of the EGR in the engine, which results in an increase in harmful exhaust gas emissions. These test results on engine lubricants under operating conditions will assist in the establishment of regulated and unregulated toxic emissions policies and lubricant quality standards.

• Journal of Environmental Health Sciences
• /
• v.44 no.6
• /
• pp.556-562
• /
• 2018

Objectives: This study was conducted to investigate the boron concentrations in 30 slime products and estimate children's dermal exposure to boron. Methods: Thirty slime products from online and offline stores were purchased for boron analysis. The boron content of each slime sample was analyzed using ICP-OES. A nationwide survey was performed to determine use patterns of slimes by a home-visit survey of 10,000 children divided into three age groups: 0-2, 3-6, and 7-12 years. The dermal exposure to boron was calculated using an exposure algorithm for child slime users. Results: The proportion of the child population using slime was 45.8%, and the mean use frequency was $2.5{\pm}3.8$ per week (range: 0.08-35). Mean time spent playing with slime was $19.6{\pm}11.3min$ (range: 1-100). Twenty-five of the thirty slimes contained a boron concentration exceeding the EU limit for toys made with sticky material of 300 mg/kg. Dermal exposure ranged from $0.0008-13.78{\mu}g/kg/day$ with the maximum weight fractions of boron in the 30 products. The dermal exposure estimate was the highest in 7-12 years old group. Conclusion: Slime use among Korean children may cause high exposure to boron. Regulation is needed to minimize boron exposure from slime products.

• Journal of the Korea Computer Graphics Society
• /
• v.24 no.5
• /
• pp.11-19
• /
• 2018

In this paper, we propose an algorithm for improving the accuracy and rate of convergence when two point clouds with noise and a low overlapping area are registered to each other. We make the most use of the geometric information of the underlying geometry of the point clouds with noise for better accuracy. We select a reasonable region from the noisy point cloud for registration and combine a modified acceleration algorithm to improve its speed. The conventional accuracy improvement method was not possible in a lot of noise, this paper resolves the problem by selecting the reasonable region for the registration. And this paper applies acceleration algorithm for a clone to low overlap point cloud pair. A simple algorithm is added to the conventional method, which leads to 3 or 4 times faster speed. In conclusion, this algorithm was developed to improve both the speed and accuracy of point cloud registration in noisy and low overlap case.

• Journal of the Mineralogical Society of Korea
• /
• v.32 no.2
• /
• pp.103-111
• /
• 2019

In this study, characteristics of sediments and suspended solids flowing into Andong and Imha Dam was analyzed by color, X-ray diffraction and ICP/MS analysis. The minerals of sediments and suspended solid consist mainly of quartz, albite, chlorite, illite and small amounts of montmorillonite and kaolinite. Unlike the Andong Dam, the Imha Dam sediments contain large amounts of calcite. Color of sediments and suspended solids varies from grayish brown to dark orange. The concentrations of major heavy metals of sediments and suspended solids in the Andong and the Imha Dam are higher than the US National Oceanic and Atmospheric Administration standard values. The concentration of heavy metals in sediments of Andong is higher than that of Imha Dam because concentration of heavy metals in the suspended solid flowing into Andong is higher than that of Imha Dam.