• 대한토목학회논문집
• /
• 제26권5D호
• /
• pp.703-708
• /
• 2006

미국, 일본 등에서는 ITS 장비 성능시험장을 구축하여 정보의 신뢰성 강화, 표준화 및 호환성 확보 등에 활용하고 있다. 본 연구에서는 이러한 외국사례를 검토하여 시험장 선정기준을 제시하고 그에 부합하는 성능시험장을 구축하였으며 ITS 장비 성능시험장의 시범운영을 실시하고 그 시험결과를 분석함으로써 ITS 장비 성능시험장 구축의 중요성을 확인하였다.

• 한국군사과학기술학회지
• /
• 제16권6호
• /
• pp.771-778
• /
• 2013

Transmission is a core component of helicopter to transmit power from engine to rotor and must have a endurance to be able to show satisfactorily its performance required during its life time. When developing a new helicopter, both military and civil airworthiness authorities require a tie-down test to verify its endurance. Procedure for transmission endurance test is described in FAR part 29 or US military specification but its details are more or less ambiguous. In this paper, we have proposed a proper procedure for transmission endurance test by giving KUH transmission endurance test example including determination of applicable torque, load and test profile.

• 한국산업융합학회 논문집
• /
• 제9권1호
• /
• pp.67-72
• /
• 2006

This study is on the development of algorithm of surge test for quality control on electrical parts of throttle body in automobiles with internal combustion engine, not only to know its condition to be good or not, but also jugding its condition to be classified into six types. To know whether its condition to be good or not, comparing and analyzing between two waveforms generated from master and test coil of throttle body. If test net area is below 20% of master area, the condition of test coil is good. By analyzing test coil waveform to master coil waveform, the condition of test coil into winding badness, insulation badness, layer and corona discharge, short badness should known. Therefore quality control system on electrical parts of throttle body should be developed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1437-1439
• /
• 1999

This paper describes test method though low voltage power system implementation for high impedance fault relay test before its operation in real power system. Through this test, relay tested its function and algorithm. In this paper, we will provides test method using low voltage power system and its results.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제20회 춘계학술대회 논문집
• /
• pp.193-196
• /
• 2003

The KSR-III developed by KARI is the first rocket vehicle which is adopting the liquid propellant rocket engine system in Korea and its flight test was successfully done last year. KSR-III is a sounding rocket class launch vehicle, but there is a sense to accomplish design, manufacture, performance test and finally its flight test by domestic technology. In this paper, the authors are intended to introduce the multi-purpose test facility(PTA-II Test Facility) which is constructed for the variety of tests on KSR-III feeding system(single component tests, verification tests, cold flow tests and combustion tests) and its test results.

• 한국식품위생안전성학회지
• /
• 제11권2호
• /
• pp.115-121
• /
• 1996

In order to compare the suppressive effect of quercetin and several its glycosides, such as quercitrin (quercetin-3-rhamnoside), isoquercitrin (quercetin-3-glucoside), hyperin (quercetin-3-galactoside) and tutin (quercetin-3-rhamnosyl glucoside), on the genotoxicity by N-methyl-N-nitrosourea(MNU), in vitro sister chromatid exchange(SCE) test using mouse spleen lymphocytes and in vivo micronucleus test using mouse peripheral blood were performed. MNU-induced SCEs in vitro were not decreased by the simultaneous treatment of test compounds. Among them, quercetin and hyperin showed significant suppressive effects at high dose(10-5M). On the other hand, MNU-induced micronucleated reticulocytes(MNRETS) in vivo were significantly decreased with good dose-dependent manner in all compound tested. However, there were not significant differences between quercetin aglycone and its glycosides in the suppressive aglycone and its glycosides may act as an antigenotoxic agent in vivo and may be useful as a chemopreventive agent of alkylating agent.

• Geomechanics and Engineering
• /
• 제27권6호
• /
• pp.615-626
• /
• 2021

The main objective of this study is to present a fast and reliable approach to predict the swelling potential of clay-bearing rocks. Investigations showed that there is a good correlation between the swelling potential of a rock and its desire to absorb water due to its clay content which could be measured using the "Contact Angle" test as one of the most common ways to determine the wettability. In this test, the angle between a water drop and the flat rock surface on which it rests is measured. The present method is very fast and returns repeatable results and requires minimal sample preparation. Only having a saw-cut surface of a sample with any shape is all one needs to perform this test. The logic behind this approach is that the swelling potential of a rock is a function of its mineral content and molecular structure, which are not only distributed in the bulk of the sample but also reflected on its surface. Therefore, to evaluate swelling behavior, it is not necessary to wait for a sample to get wet all the way to its "internal structure" (which, due to the low permeability of clay-bearing rocks, is very slow and time-consuming). Instead, one can have a good sense of swelling potential by studying its surface. Parametric studies on the effect of moisture content, porosity, and surface roughness on the contact angle measurements showed that using a saw-cut oven-dried sample is a convenient way to evaluate the swelling potential by this method.

• 한국군사과학기술학회지
• /
• 제7권2호
• /
• pp.126-135
• /
• 2004

The KSR-III rocket developed by KARI is the first rocket vehicle which is adopting the liquid propellant rocket engine system in Korea and its flight test was successfully done last year, KSR-III is a sounding rocket class launch vehicle, but there is a sense to accomplish design, manufacture, performance test and finally its flight test by domestic technology. In this paper, the authors are intended to introduce the multi-purpose test facility(PTA-II Test Facility) which is constructed for the variety of tests on KSR-III feeding system(single component tests, verification tests, cold flow tests and combustion tests) and its firing test results.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제6권7호
• /
• pp.361-370
• /
• 2017

본 논문은 임베디드 시스템이 제어하는 서브시스템의 실시간 피드백을 반영하여 테스트 케이스를 생성할 수 있는 테스트 생성기 구조를 제안한다. 일반적으로 폐쇄형 임베디드 시스템은 자신이 제어하는 서브시스템의 피드백을 참조하여 서브시스템의 다음 상태를 제어하는 값을 결정한다. 그와 같은 시스템에서는, 피드백을 고려하지 않는 전통적인 테스트 케이스는 사용하기 어렵다. 본 논문에서 제안하는 테스트 케이스 생성기 구조는 서브시스템의 피드백을 이용하여 다음에 사용할 테스트 케이스를 실시간 재구성한다. 제안하는 구조를 구현하고 데모 시스템을 이용하여 유용성을 검증한다.

• International Journal of Computer Science & Network Security
• /
• 제21권12spc호
• /
• pp.549-555
• /
• 2021

Machine Learning(ML) splits data into 3 parts, which are usually 60% for training, 20% for validation, and 20% for testing. It just splits quantitatively instead of selecting each set of data by a criterion, which is very important concept for the adequacy of test data. ML measures a model's accuracy by applying a set of validation data, and revises the model until the validation accuracy reaches on a certain level. After the validation process, the complete model is tested with the set of test data, which are not seen by the model yet. If the set of test data covers the model's attributes well, the test accuracy will be close to the validation accuracy of the model. To make sure that ML's set of test data works adequately, we design an experiment and see if the test accuracy of model is always close to its validation adequacy as expected. The experiment builds 100 different SVM models for each of six data sets published in UCI ML repository. From the test accuracy and its validation accuracy of 600 cases, we find some unexpected cases, where the test accuracy is very different from its validation accuracy. Consequently, it is not always true that ML's set of test data is adequate to assure a model's quality.