• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2014년도 자성 및 자성재료 국제학술대회
• /
• pp.131-131
• /
• 2014

• 기본간호학회지
• /
• 제7권3호
• /
• pp.391-400
• /
• 2000

A long-term bed rest results in an inevitable foot drop. Yet preventive device such as a foot board and high-neck tennis shoes, are not widely used. This study was conducted to compare the effects of a pillow-type foot board with that of the band-type device. The band-type device of a resonable price is designed for an effective prevention of foot drop, and the convenience for it use. Among the non-equivalent control group design, foot drop preventive effects, usefulness of the device, as well as its cost effectiveness were examined. The study was carried out for four months from December 1999, and its subject had been patients and nurses of two intensive care units at K medical center in Seoul. According to the study purpose, the data collected were analyzed by $x^2-test$ and t-test. The results are as follow : 1. The ROM of ankle joint is promoted in the experimental group with a band-type device comparing the control group with a pillow type one. Dorsiflexion is particularly increased in the experimental group as compared with the control group, while planterflexion hardly shows any change. 2. The usefulness score of the experimental group nurses using the band-type device (23.97) is higher than that of the control group nurses (18.88). 3. In an aspect of the unit production cost, band-type devices are low-priced compare with pillow-type or other foot board (wooden) or high-neck tennis shoes. In summary, the newly developed band-type device is both useful and preventive for a foot drop. It is also desirable regarding to the production cost and the cost effectiveness. This fact proves that the new anti-foot drop device could be practical both for clinical care and home care. Yet the results were obtained by some subjects, it should be used after a further examination. More effective nursing intervention could be observed throughout general studies, including proper positioning and foot and ankle exercises which are the important variables of the foot drop prevention.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.498-508
• /
• 2008

경부고속열차 차상컴퓨터 장치의 하부장치로 운전자에게 차량의 정보와 고장의 현시 그리고 유지보수기능 및 훈련기능을 가지고 있는 장치가 TECA (Terminal Cabin)이다. KTX 차량의 운전은 고속화 운전을 위해 신호운전의 필요가 요구되어지며 차량의 장대화 및 일인운전을 통한 차량의 기본정보 취득 및 고장에 대한 조치에 있어 많은 어려움이 있는 것이 사실이다. 이에 대해 차량에서 발생하는 수많은 정보에 대한 신속하고 정확한 처리와 유지보수를 위해 TECA장치는 그 활용에 있어 반드시 필요한 장치이다. 그러나 본 장치에 대한 하드웨어와 유지보수 그리고 새로운 요구에 따른 장치개발에는 연구사례가 없는 실정이다. 이에 운전자지원단말기 장치의 유지보수능력 개발과 장치에 대한 이해를 돕고 장치개발에 필요한 TECA의 기초기능과 요구사항을 하드웨어 중심으로 연구하였으며 이로 인한 새로운 운전자 단말기 장치 개발에 필요한 사양정립에 활용하도록 활용할 수 있으리라 본다.

• 한국농공학회논문집
• /
• 제60권1호
• /
• pp.31-36
• /
• 2018

A rainwater harvesting device was developed for runoff flow harvesting in a small stream or channel and its performance was evaluated in small fields. The rainwater harvesting device has slits on its side of cylindrical volume in 15 cm diameter and 70 cm length, which is designed to increase its water flow harvesting capacity. The maximum collectable water quantity was about 0.0022 ton/sec (130 L/min). Rainwater harvesting device were installed in two locations (P1, P2). P1 is a point for rainfall runoff flow harvesting. P2 is a point for ordinary flow harvesting. During this study, total rainfall depth was 334.5 mm. Runoff of 1,722 ton and 7,984 ton occurred in P1 and P2, and 273 ton and 125 ton were collected by this rainwater harvesting device. Harvesting efficiency was calculated as 15.85 % and 1.57 % in P1 and P2. Clogging of screen filter media in the cylinder due to soil and suspended solids has lowered the harvesting efficiency. However, it was possible to harvest 30 ton/month of rainwater harvesting and it is expected that it will help to solve short-term water shortage.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 춘계학술대회 논문집
• /
• pp.109-113
• /
• 2004

Slitting device is equipment to separate spent fuel of 250 mm rod cut pellets and hull in order to supply required $UO_2$ pellets through the dry pulverizing/mixing device. For development of its device, We have analyzed slitting programs so that the existing device is modified an appropriate scale in the advanced spent fuel conditioning process. The results of the analysis, we added the automatic separation function of pellets and hull, After slitting. Also, we have concentrated on reducing the operation time so that the support and the body of a slitting blade could have been established in the single structure to be easily maintained. It is based on a design and manufacture of a testing device and we have performed an efficiency evaluation. We have analyzed the results of efficiency tests of the slitting device and get the specification of the slitting device. we complete the basic design of the slitting device by using of these data. Therefore, We apply to a basic data when manufacturing a slitting device.

• 한국수자원학회논문집
• /
• 제52권4호
• /
• pp.265-277
• /
• 2019

본 연구에서는 효율적인 와류형 미필터 비점오염저감장치를 개발하고 검증하였다. 저감장치의 검증을 위해 오염물질을 이용하여 총 12개 형태(3개 강우강도${\times}$2개 상태${\times}$2개 단계)의 실험을 진행하였다. 실험은 (1) 모의유입량 산정(강우강도 2.5 mm/hr: $0.00152m^3/s$, 강우강도 3.395 mm/hr: $0.00206m^3/s$, 강우강도 6.870 mm/hr: $0.00326m^3/s$); (2) 오염물질 채취 및 투입(4개 입경 사이즈의 25%씩 혼합); (3) 오염물질 제거효율 측정으로 구성하였고, 장치 초기상태와 운영상태로 구분하여 수행되었다. 강우강도별로 분석한 결과, 모든 강우강도에서 초기상태 및 운영상태 모두 오염물질 농도가 감소하였으며, 유입수 대비 유출수 오염물질 제거효율에서도 오염물질을 환경부 기준 80% 이상 제거하는 결과를 보였다. 특히 제거효율이 시간이 지남에 따라 서서히 증가하여 약 90%를 상회하였으며, 초기상태보다 운영상태에서 오염물질 제거효율이 더 높은 것으로 나타났다. 따라서 본 연구에서 개발한 와류형 미필터 비점오염저감장치로 효율적인 비점오염원을 제거할 수 있음을 증명하였다.

• 대한건축학회연합논문집
• /
• 제20권6호
• /
• pp.105-112
• /
• 2018

The purpose of this study is to develop an application that supports a user in the maintenance of small photovoltaic device. To this end, this study analyzed the maintenance status, related regulations and existing application contents in Korea. According to the analysis results, most users did not maintain device for themselves. In addition, the maintenance market has not been activated due to its low profitability. Regulations on the maintenance of photovoltaic device prescribed by the KESCO and Japanese counterpart were analyzed to establish the standards for photovoltaic device inspection, and an application was developed based on the existing applications and research results. In order to evaluate the completeness and satisfaction of the developed application, it surveyed 52 users and 22 experts. The survey results showed that the completeness was calculated to be 90 points, and the level of satisfaction was 93 points on a 100-point scale. Therefore, it is expected that the maintenance application developed in this study will be useful for users to maintain the photovoltaic device.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.209-210
• /
• 2023

A panic device is a type of door lock that opens when pressed or pushed by the body, so it is an emergency escape device designed to easily open the door and escape in an emergency situation such as fire or earthquake. It is an ideal door handle for an emergency exit. Because many people move quickly and it is easy to use, it is common in Europe and North America, but in Korea, the product is expensive, so it is used on a limited basis in luxury buildings such as hotels, but its use is gradually increasing. East Asian countries such as Korea, China, and Japan mainly prefer the North American type. The design of the penic device used in is a uniform and universal design, and research and development of a new design of the penic device was required to develop a new design type product considering the aesthetics of the building.

• 한국ITS학회 논문지
• /
• 제5권3호
• /
• pp.24-28
• /
• 2006

본 논문에서는 메인 제어 보드에 연결되는 디바이스 모듈 보드들을 자동하는 인식하는 새로운 자동화 시스템을 설계 및 구현하였다. 본 논문의 시스템은 메인보드와 디바이스 모듈 보드로 나누어 설계하였으며, 메인보드에는 모듈보드와 연결할 수 있도록 슬롯 구조에 의해 설계되었다. 제안된 슬롯구조는 장착이 편리하고 기능의 추가 및 확장이 가능하도록 하였다. 또한 장치 보드들을 자동으로 인식함으로 통해 새로운 기존의 시스템을 업그레이드하거나 새로운 디바이스의 추가하는 등의 기능변경이 용이하도록 시스템을 설계 및 개발하였다. 본 논문에서 제안 된 시스템은 K10S1 PLC를 가지고 실험 및 검증하였다. 실험 분석 결과 제품의 기능향상에 드는 간 및 비용의 단축 효과가 나타났다.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 2003년도 IFSCC Conference Proceeding Book I
• /
• pp.1-12
• /
• 2003

Instead of sensory evaluation, we designed an evaluation method of the setting function of hairstyling products, based on an original theory focusing on changes in bending stress observed when a load with continuous bending is applied to human hair. Specifically, we developed a device to measure bending stress to quickly and objectively evaluate the condition of human hair, particularly its dynamic properties such as the setting function, following the application of hairstyling products. This device generates a load with continuous bending while applying a pendulum motion to a hair tress, one end of which is anchored. The setting function and holding power of resins of various molecular weight and ionic properties were evaluated using this device. The results demonstrated a close correlation with those obtained by experts' sensory evaluation. The evaluation results of bending stress and holding rate confirmed that the combined use of two different resins could improve the function of setting preparations. Evaluation using this device was able to substitute for sensory evaluation, and offers quick objective evaluation and detection of changes in the holding power of hairstyling products over time. We conclude that evaluation using this device is a promising new method.