• Convergence Security Journal
• /
• v.9 no.4
• /
• pp.7-12
• /
• 2009

It is very difficult to completely block the DDoS attack, which paralyzes services by depleting resources or occupying the network bandwidth by transmitting a vast amount of traffic to the specific website or server from normal users' PCs that have been already infected by an outside attacker. In order to defense or endure the DDoS attack, we usually use various solutions such as IDS (Intrusion Detection System), IPS (Intrusion Prevention System), ITS (Intrusion Tolerance System), FW (Firewall), and the dedicated security equipment against DDoS attack. However, diverse types of security appliances cause the cost problem, besides, the full function of the equipments are not performed well owing to the unproper setting without considering connectivity among systems. In this paper, we present the effective connectivity of security equipments and countermeasure methodology against DDoS attack. In practice, it is approved by experimentation that this designed methdology is better than existing network structure in the efficiency of block and endurance. Therefore, we would like to propose the effective security control measures responding and enduring against discriminated DDoS attacks through this research.

• Korean Journal of Optics and Photonics
• /
• v.28 no.5
• /
• pp.241-249
• /
• 2017

This paper presents the design and evaluation of the optical system for an uncooled thermal-imaging camera. The operating wavelength range of this system is from $7.7{\mu}m$ to $12.8{\mu}m$. Through optimization, we have obtained a LWIR (Long Wave Infrared) optical system with a focal length of 5.44 mm, which consists of four aspheric surfaces and two diffractive surfaces. The f-number of the optical system is F/1.2, and its field of view is $90^{\circ}{\times}67.5^{\circ}$. The hybrid lens was used to balance the higher-order aberrations, and its diffraction properties were evaluated by scalar diffraction theory. We calculated the polychromatic integrated diffraction efficiency, and the MTF drop generated by background noise. We have evaluated the thermal compensation of a LWIR fixed optical system, which is optically passively athermalized to maintain MTF performance in the focal depth. In conclusion, these design results are useful for an uncooled thermal-imaging camera.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.5
• /
• pp.162-170
• /
• 2022

In this paper, the phased-array transceiver (TRX) channel amplitude and phase calibration method for a radar wind profiler (RWP) based on the 256 active phased array is discussed. Without the additional module, the TX and RX calibration paths were secured using couplers and switches in the TRX front ends and the TRX switching duplexers, and the amplitude and phase of the 256 TRX were calibrated using a gain and phase detector. The beam widths and side lobes of five beams (vertical, east, west, south, and north) of the calibrated 256 active phased array antenna were confirmed by a near-field which agreed well with the simulation results. The proposed calibration method can be easily applied to a system based on an active phased array operated in an outdoor environment.

• Journal of Korea Multimedia Society
• /
• v.7 no.2
• /
• pp.283-291
• /
• 2004

Internet Service Subscribers Network has a new role of providing the various multimedia services to the home. However, there exist several types of distributed subscribers network using Asymmetric Digital Subscriber Line (ADSL), Very high-bit rate Digital Subscriber Line (VDSL), and Data Over Cable Service Interface Specifications (DOCSIS). The efficient and concentrated network management of those several distributed subscribers networks with resources require the general information model of network, which has abstract and conceptional managed objects independent of type of network and its equipment to manage the integrated subscriber network. This paper presents the general Internet subscribers network model of the managed object to manage that network in the form of integrated hierarchy This paper adopts the object-oriented development methodology with UML and designs and implements the integrated subscribers NMS of cable data network and VDSL network as examples of the subscriber networks.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.5
• /
• pp.394-399
• /
• 2015

This paper is a study related to connecting to medical device in IoT environment for e-Health Implementation. The implementation environment of this paper consists of sensing device node, gateway and its server. The information from medical devices on sensor node is transferred to gateway. The gateway transfers the information from their devices into the server and the server saves their transferred information. The medical information from medical devices is ready to use in making medical decision which is saved in database. In this paper, we connected the gateway to the commercial sensor node for implementing gateway functions. We studied and implemented how their network entities communicate each other.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.5
• /
• pp.229-233
• /
• 2013

Mine detector of troops is different from other equipments. It is a base of a miner branch's combat, combat support and mission. But its notion is too obsucure and each troops' model and maker of it is so different and most of it is old type so there are a lot of malfunctions. Hence, I will define management of mine detector and figure out these days miner troops' mine detector situation. I will collect experts' opinions too. Through a discussion we could found improvement plan and develop it adequate for future operational environment. Proceeding all these courses and finally making it weaponize are the points of this writing.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.752-755
• /
• 2009

Recently, the production process system is largely composed automatic system using the wired network. The production process system using wired network has disadvantages that take place expense when the installed and inspected production of equipment was replaced. The each equipment happens to repair cost for control and management in production processes. In this paper, the industrial equipment that applied for IEEE 802.15.4(ZigBee) technology solves a complicated space at the plant. And then when the industrial equipments replace wired network with wireless network, this paper studied its user interface.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.1
• /
• pp.27-32
• /
• 2021

In this study, we fabricated multilayer graphene on a glass substrate by stacking the monolayer graphene synthesized via chemical vapor deposition. The electrical sheet resistance and optical transmittance were evaluated to confirm the quality of the stacked multilayer graphene. Using the fabricated multilayer graphene/glass structure, we characterized its thermal radiative property in terms of the integrated emissivity. The integrated emissivity of the multilayer graphene/glass structure was tuned from 0.91 to 0.72 when the number of graphene layers was changed from 1 to 12. We also demonstrated that the emissivity tunability provided a way to control the apparent temperature of an object that can be used in infrared stealth applications.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.8
• /
• pp.759-769
• /
• 2013

Electronic equipment has been applied to virtually every area associated with commercial, industrial, and military applications. Specifically, electronics have been incorporated into avionics components installed in aircraft. This equipment is exposed to dynamic loads such as vibration, shock, and acceleration. Especially, avionics components installed in a helicopter are subjected to simultaneous sine and random base excitations. These are denoted as sine on random vibrations according to MIL-STD-810F, Method 514.5. In the past, isolators have been applied to avionics components to reduce vibration and shock. However, an isolator applied to an avionics component installed in a helicopter can amplify the vibration magnitude, and damage the chassis, circuit card assembly, and the isolator itself via resonance at low-frequency sinusoidal vibrations. The objective of this study is to investigate the dynamic characteristics of an avionics component installed in a helicopter and the structural dynamic modification of its tray plate without an isolator using both a finite element analysis and experiments. The structure is optimized by dynamic loads that are selected by comparing the vibration, shock, and acceleration loads using vibration and shock response spectra. A finite element model(FEM) was constructed using a simplified geometry and valid element types that reflect the dynamic characteristics. The FEM was verified by an experimental modal analysis. Design parameters were extracted and selected to modify the structural dynamics using topology optimization, and design of experiments(DOE). A prototype of a modified model was constructed and its feasibility was evaluated using an FEM and a performance test.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.6
• /
• pp.698-702
• /
• 2016

Thermal imager is now regarded as one of the key observation devices for ISR activities and getting important more and more. As other detectors, however, the thermal detectors also have maximum input and therefore they will be saturated if the input IR energy exceeds the allowed range. The saturation in the thermal detector makes it impossible to distinguish the target from background, as a result, the thermal imager does not perform its own mission anymore. In order to get an insight related with the image saturation, this paper develops a saturation model for a thermal imaging system, not a thermal detector. The proposed modeling starts from analyzing the specification of a thermal imager. Coupled with the characteristic parameters of the object, the saturation model can be used to predict the distance on which the detector is saturated. The proposed saturation model prove its validity by applying it for the case of observing a flash-bang.