• 제목/요약/키워드: ITO-less

검색결과 65건 처리시간 0.025초

폴리(페닐렌에테르설폰)을 이용한 용량형 습도센서의 제조 (Fabrication of Capacitive-Type Humidity Sensor with Poly(p-phenylene ether sulfone))

  • 조재익;최균;김창정;김병익;박승현;방기석
    • 폴리머
    • /
    • 제30권3호
    • /
    • pp.207-209
    • /
    • 2006
  • ITO 코팅 글라스를 기판으로 사용하고 폴리(페닐렌에테르설폰)(PES)을 감습막으로 하여 정전용량형 습도센서를 제작하였다. 감습막은 PES를 m-cresol에 용해한 후 스핀코팅으로 제조하였고 그 상부에 다공성 Au막을 스퍼터링으로 증착하였다. 상대습도 $20\sim90%$의 범위에서 센서의 용량은 감습막두께에 반비례하였고 1% 미만의 비선형 특성을 나타내었다. 또한 $1.4{\mu}m$ 두께의 샘플에서는 20 kHz에서 1.3%의 히스테리시스와 1.14의 우수한 감도를 얻을 수 있었다.

Hydrogenated In-doped ZnO Thin Films for the New Anode Material of Organic Light Emitting Devices: Synthesis and Application Test

  • Park, Young-Ran;Nam, Eun-Kyoung;Boo, Jin-Hyo;Jung, Dong-Geun;Suh, Su-Jeong;Kim, Young-Sung
    • Bulletin of the Korean Chemical Society
    • /
    • 제28권12호
    • /
    • pp.2396-2400
    • /
    • 2007
  • Transparent In-doped (1 at.%) zinc oxide (IZO) thin films are deposited by pulsed DC magnetron sputtering with H2 mixed Ar atmosphere on glass substrate without any heating process. Even at room temperature, highly c-axis oriented IZO thin films were grown in perpendicular to the substrate. The hydrogenated IZO (IZO:H) film isolated in H2 atmosphere for 30 min exhibited an average optical transmittance higher than 85% and low electrical resistivity of less than 2.7 × 10?3 Ω·cm. These values are comparable with those of commercially available ITO. Each of the IZO films was used as an anode contact to fabricate organic light-emitting diodes (OLEDs) and the device performances studied. At the current density of 1 × 103 A/m2, the OLEDs with IZO:H (H2) anode show excellent efficiency (11 V drive voltage) and a good brightness (8000 cd/m2) of the light emitted from the devices, which are as good as the control device built on a commercial ITO anode.

점프 항을 포함하는 이자율 기간구조 모형의 채권 가격결정을 위한 수치적 분석 및 시뮬레이션 (Numerical Analysis and Simulation for the Pricing of Bond on Term-Structure Interest Rate model with Jump)

  • 박기섭
    • 인터넷정보학회논문지
    • /
    • 제25권2호
    • /
    • pp.93-99
    • /
    • 2024
  • 본 논문에서는 점프 항을 포함하는 이자율 기간구조 모형의 채권 가격을 결정하기 위하여 이토의 보조정리(Ito's Lemma)를 적용하여 채권가격편미분방정식(Partial Differential Bond Price Equation; PDBPE)을 유도한다. PDBPE으로부터, 지수함수에 대한 매클로린 급수 (Maclaurin series; MS)와 적률생성함수(moment-generating function; MGF)를 이용하여 채권 가격의 수치해(Numerical Solution; NS)를 구한다. 그리고 몬테 카르로 시뮬레이션(Monte Carlo Simulation; MCS) 기법을 이용하여 채권의 가격을 결정하기 위한 알고리즘을 제안하고, 시뮬레이션 과정을 통하여 채권의 가격을 결정한다. 수치적 분석을 이용한 채권 가격의 NS와 MCS를 이용하여 얻은 채권 가격의 결과를 비교하기 위하여, NS의 값과 MCS의 값의 비율인 상대오차(Relative Error; RE)를 구한다. 이로부터 얻은 RE가 약 2.2%보다 작음을 확인할 수 있고, 이것은 수치적 분석뿐만 아니라 제안한 알고리즘을 이용해도 채권의 가격을 매우 정확하게 예측할 수 있음을 의미한다. 또한, 지수함수에 대한 MS를 이용하여 얻은 채권 가격의 NS가 MGF를 적용하여 구한 채권 가격의 NS보다 상대적으로 오차가 작다는 것을 확인할 수 있다.

Method Controlling Two or More Sets of PMSM by One Inverter on a Railway Vehicle

  • Ito, Takuma;Inaba, Hiromi;Kishine, Keiji;Nakai, Mitsuki;Ishikura, Keisuke
    • Journal of international Conference on Electrical Machines and Systems
    • /
    • 제3권2호
    • /
    • pp.207-214
    • /
    • 2014
  • If two or more Permanent Magnet Synchronous Motors (PMSM) can be controlled by one inverter, a train can be driven by less energy than the present Induction Motor (IM) drive system. First, this paper proposes a method for simulating the movement of wheels and a vehicle to develop a control method. Next, a method is presented for controlling two or more PMSMs by one inverter.

Carbon Nanotube FEDs for Low Power Character Displays

  • Uemura, Sashiro;Yotani, Junko;Nagasako, Takeshi;Kurachi, Hiroyuki;Nakao, Takehiro;Ito, Masaaki;Sakurai, Akira;Shimoda, Hideo;Ezaki, Tomotaka;Fukuda, Kazuhiko;Saito, Yahachi
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2008년도 International Meeting on Information Display
    • /
    • pp.1525-1528
    • /
    • 2008
  • High-luminance CNT-FED character-displays using simple line-rib-structure was performed. One display-panel had $48{\times}480$-dots and the sub-pixel pitch was 1mm. Another panel had $32{\times}256$-color-pixels, and the subpixel size was $0.6mm{\times}1.8mm$. The power consumption was less than 10W at character-displaying module. It should be useful for public display even under emergent no-power condition.

  • PDF

Enhanced Electron Emission from Carbon Nanotube Paste after Firing

  • Kang, Sung-Kee;Choi, Jong-Hyung;Han, Jae-Hee;Yoo, Ji-Beom;Park, Chong-Yun;Nam, Joong-Woo;Jung, J.E.;Kim, J.M.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2003년도 International Meeting on Information Display
    • /
    • pp.849-851
    • /
    • 2003
  • After multi-walled carbon nanotubes (MWNT) powder was crushed with ball milling process, it was mixed with organic vehicles. And then CNT paste was printed on ITO coated glass substrate. The field emission characteristics of CNT pastes fired in air atmosphere was better than that of CNT paste fired in Ar ambient due to less organic residues after firing.

  • PDF

Study on Gloeostereum Inoarnatum 5. Itoetimai - Fermentation Cultivation(Liquid Fermentation)

  • Jie, Tai-Long
    • Plant Resources
    • /
    • 제4권3호
    • /
    • pp.200-205
    • /
    • 2001
  • It was reported in our Previous paper that the fermented products from Gloeostereum incarnatum strongly inhibit the growth of six kinds of bacteria in human bodies. In this paper the appropriated conditions of immersing culture for the strain 8 903 of Gloeostereum incarnatum was analysed. And the output of the hypha and fermentative product was determined or compared. The prelimenaryresults showed that the appropriated conditions for the growth of Gloeostereum incarnatum are: (1)culture medium:glucose 3%; protein peoptne 0.2%; soybeancake power 1% yeast power 0.3%; KH2PO40.05%; MgSO4 0.03%; CaCO3 0.01%; vitamin Bl 0.001%; befor sterilization pH Value of six should be maintained; (2) temperature; 27f ~28f ; (3) time; about 200 hours; (4) ventilation; (30%∼50%)/min. The sigh of the end culture are: pH coming down about 4: remnant glucoses less 1%; amino nitrogens about 20%; time about eight days. In the aforementioned conditions, the output of fermentative product achieve to 2.5∼3g/L.

  • PDF

STUDY ON GLOEOSTEREUM INOARNATUM S. ITOET IMAI-FERMENTATION CULTIVATION(LIQUID FERMENTATION)

  • Jie, Tai-Long
    • 한국자원식물학회:학술대회논문집
    • /
    • 한국자원식물학회 2001년도 The 8th International Symposium
    • /
    • pp.74-82
    • /
    • 2001
  • It was reported in our Previous paper that the fermented products from Gloeostereum incarnatum strongly inhibit the growth of six kinds of bacteria in human bodies. In this paper the appropriated conditions of immersing culture for the strain 8 903 of Gloeostereum incarnatum was analysed. And the output of the hypha and fermentative product was determined or compared, The prelimenaryresults showed that the appropriated conditions for the growth of Gloeostereum incarnatum are: (1)culture medium:glucose 3%; protein peoptne 0.2%; soybeancake power 1%, yeast power 0.3%; KH2PO40.05%; MgSO4 0.03%; CaCO3 0.01%; vitamin Bl 0.001%; befor sterilization pH Value of six should be maintained; (2) temperature; 27$^{\circ}C$~28$^{\circ}C$; (3) time; about 200 hours; (4) ventilation; (30%~50%)/min. The sigh of the end culture we: pH coming down about 4: remnant glucoses less 1%, amino nitrogens about 20;, time about eight days. In the aforementioned conditions, the output of fermentative product achieve to 2.5 ~3g/L.

  • PDF

리튬 및 프로톤 전도성 고분자전해질을 사용하여 제작한 Electrochromic 창의 전기 및 광학적 특성 (Electrical and Optical Properties of Electrochromic Window with Both Lithium and Proton Conducting Polymer Electrolytic Media)

  • 박성용;이철환;김형선;조원일;조병원;윤경석;안춘호;우경근
    • 한국표면공학회지
    • /
    • 제28권1호
    • /
    • pp.46-54
    • /
    • 1995
  • An electrochromic(EC) cell was constructed using $WO_3$ as a electrochromic material and NiO as a counter electrode, deposited onto ITO-coated glass by the implementation of electron beam evaporation. The electrolytic media were both lithium and proton conducting polymers such as poly-acrylonitrile(PAN)-$LiClO_4$, poly-ethylene oxide(PEO)-$LiClO_4$, poly-vinyl butyral(PVB)-LiCl and PVB-H$_3$$PO_4$. Potentiodynamic cycling of the cells using PAN-$LiClO_4$, or PVB-$H_3$$PO_4$ electrolyte yielded a transmission variation of more than 40% at the wavelength of 632.8 nm within less than 10 sec response time at room temperature. These results indicate that these electrolytes, transparent in gel type, are premising for the application in large area electrochromic windows.

  • PDF

Flexible audible display(VizDio$^{TM}$) using polymer dispersed liquid crystal on film speaker

  • Bae, Byeong-Taek;Park, Dong-Hee;Jeong, Kwang-Ho;Choi, Won-Kook
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
    • /
    • pp.877-878
    • /
    • 2009
  • To realize the flexible audible display (FAD), polymer dispersed liquid crystal(PDLC) is deposited on PVDF(Poly-vinylidene fluoride) film with piezoelectric property. With applied audio signal, it makes sound more than 70 dB in 700 Hz-10kHz. In case of transparency it is opaque and transmittance is less than 10% at 550nm wavelength without bias voltage. It is turned to be transparent and show transmittance of 66% with driving voltage of 60V.

  • PDF