• Journal of the Korean Dietetic Association
• /
• v.7 no.3
• /
• pp.282-294
• /
• 2001

n accordance with the National Health Promotion Act of 1995, newly designed National Health and Nutrition Survey was carried out in winter of 1998. Although this survey amended most of the problems noted in previous Nutrition Surveys, it still had a limitation in reflecting seasonal variation in food intake due to the survey period which was confined to November and December. In order to counterbalance this limitation and estimate the yearly food intake of Korean population, three seasonal nutrition surveys were taken place in spring, summer, and fall of 1999. Seasonal Nutritional survey targeted 15 households each in 60 nationwide primary sampling units(PSUS) which were part of 200 PSUS of 1998 National Health and Nutrition Survey. Therefore, total of 2,700 households were surveyed in 3 seasons. The interviewers visited each household members and carried out face to face interview on household. Daily food intake was monitored using 24 hour recall method. According to the survey results, fruits, beverage and alcohol intake showed large variation with season while processed foods showed almost no variation. And intake of vegetables and fruits were influenced by their own harvesting time and had impact on the list of foods consumed most. With the result of the 1998 NHNS, this study made it possible to estimate the yearly average food intake of Korean population. The result of this survey is expected to be used in planning food supply and setting tolerance level of contaminants of each foods at the government level.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2009.04a
• /
• pp.181-186
• /
• 2009

Recently, the consuming efficiency of energy and natural resources has been a hot issue because of the continuous increasing of energy consumption and soaring of international oil prices. We tried to seek an action plan for the government's new paradigm 'Low-Carbon, Green Growth' by consuming energy efficiently and improving in energy management based on ubiquitous IT technologies. In this study, the library survey method is adopted for this study and IP-USN(internet protocol based ubiquitous sensor network) is considered as a core technology among various ubiquitous IT technologies. The purpose of this study is to deliver a method of energy management through integrating the context information gathered from sensors with digital space models and visualizing them together. The details are to survey the technologies of digital space modeling, USN based monitoring, building energy management and to integrate these technologies all together. This study will contribute to the enhancement of efficient building energy management by grasping the accurate situation of energy consuming in the building in realtime and minimizing unnecessary energy wastes.

• Journal of the Korean housing association
• /
• v.25 no.4
• /
• pp.59-72
• /
• 2014

This study proposes a data-mining analysis method for examining variable multi-attribute big-data, which is considered to be more applicable in social science using a Correspondence Analysis of variables obtained by AIC model selection. The proposed method was applied on the Seoul Survey from 2005 to 2010 in order to extract interesting rules or patterns on characteristics of single household. The results found as follows. Firstly, this paper illustrated that the proposed method is efficiently able to apply on a big dataset of huge categorical multi attributes variables. Secondly, as a result of Seoul Survey analysis, it has been found that the more dissatisfied with residential environment the higher tendency of residential mobility in single household. Thirdly, it turned out that there are three types of single households based on the characteristics of their demographic characteristics, and it was different from recognition of home and partner of counselling by the three types of single households. Fourthly, this paper extracted eight significant variables with a spatial aggregated dataset which are highly correlated to the ratio of occupancy of single household in 25 Seoul Municipals, and to conclude, it investigated the relation between spatial distribution of single households and their demographic statistics based on the six divided groups obtained by Cluster Analysis.

• Journal of Korea Water Resources Association
• /
• v.53 no.2
• /
• pp.89-96
• /
• 2020

Water management agencies under the Ministry of Environment produce and accumulate qualified basic data for major rivers. However, the integrated management of the river water has been weak since the artificial water circulation process, such as the intaking and drainage of agricultural water, has not been examined in the basin, which includes many agricultural land. In this study, a study was conducted on how the power usage method (operating time method) based on the running time can be applied and improved among indirect flow rate measurement methods used to investigate flow rates collected by the riverside for agricultural water purposes, and thus the resultant data of high reliability can be obtained at low cost. The operation time method is suitable for small-scale water pumping stations where it is difficult to secure real-time power supply data. The reliability of the data was verified through the correlation analysis with the actual flow rate, and it was found that the flow rate calculated by the operation time method reflecting the level of the stream to which the inlet of the pumping station is connected can be reasonably matched with the actual flow rate. In addition, it was confirmed that the investment cost at the time of initial installation of the facility was highly efficient by generating qualified flow data at low cost through comparison with direct flow rate measurement methods. If flow data is secured by applying the operation time method to large and small water farms located along the riverside, it is expected that more quantitative and integrated stream water management will be possible.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.2
• /
• pp.171-178
• /
• 2015

This research is the first research on developing the speed limit select model and also it is the result of the research on the importance of each element and consideration factors when selecting the speed limit. For the consideration factor discrimination and calculation of the importance, the delphi method and AHP method was used. The delphi survey was processed through third round survey, 5 high consideration factor(Level 1) and 23 low consideration factor(Level 2) was discriminated. During the process of the third delphi survey, when the CVR cost was in the range between 0.4~1.0 it was treated as the consideration factor when selecting the speed limit and less than 0.4 cost was eliminated. In the process of the second delphi survey, 33 consideration factors were discriminated but was reordered into 23 categories through the third survey. Based on the 23 categories earned through the third delphi analysis, the AHP survey was processed. The result of the AHP survey was that out of the importance of the 5 high consideration factor(Level 1), the traffic condition was evaluated as the number one factor and the vessel condition, waterway condition, environment condition, supporting condition and etc. conditions were evaluated following the traffic condition. Out of the 23 low consideration factor(Level 2) consideration, the visibility was evaluated to be the first important and the performance of the vessel steering, objective factors within the harbor, amount of traffic and density, distance between the passing vessel, speed of the steering capacity and tidal current were the following evaluated factors.

• Journal of Korean Society of Disaster and Security
• /
• v.13 no.4
• /
• pp.65-74
• /
• 2020

Continuous and accurate instrument of river water usage is needed for sustainable river water management. Although the instrument methods applicable to each point of use of river water are different, more precise direct instrument methods are required at the point of major open channel. Users of river water should select appropriate direct instrument methods to measure usage, but there is a lack of standards and verification research. In this study, the H-Q rating curve method, ultrasonic method, and microwave method were applied directly to the test basin in the upper basin of Mangyeong river, and the accuracy of measurement data was evaluated by comparing absolute error between discharge data calculated by instrument method. When comparing the calculated discharge of point units, the ultrasonic method showed the best results of the actual measurement. Through continuous instrument, the sum of the daily and monthly units was compared, and the ultrasonic and microwave methods were shown to be highly accurate. Based on the results of this study, it is hoped that the appropriate direct measurement method can be selected according to the importance of the river water use facility, considering that the ultrasonic method and the microwave method are relatively costly compared to the water level-flow relationship method.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.5
• /
• pp.279-288
• /
• 2021

In the era of the 4th industrial revolution, smart construction, in which new technologies such as UAV (Unmanned Aerial Vehicle) are fused, is attracting attention in the construction field. However, the method of estimating earthwork volume using DEM generated by UAV survey according to practical regulations such as construction design guidelines or standard product counting is not officially recognized and needs to be improved. In this study, different types of UAV were measured and DEM was obtained using this data. The DEM (Digital Elevation Model) thus obtained was analyzed for changes in the amount of earthworks according to the size of the GSD (Ground Sample Distance). In addition, the amount of earthwork by DEM and the amount of earthwork by existing design drawings were compared and analyzed. As a result of the study, it was suggested that images with a GSD of 5cm or less are effective to generate a high-quality DEM. Next, as a result of comparing the earthwork volume calculation method using DEM and the earthwork volume based on the existing 2D design drawings, a difference of about 1% was shown. In addition, when the design earthwork amount calculated by the double-section averaging method was compared with the designed earthwork amount using DEM data by UAV survey, a difference of about 1% was found. Therefore, it is suggested that the method of calculating the amount of earthworks using UAV is an efficient method that can replace the existing method.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.221-228
• /
• 2002

Thickness of concrete lining, voids at the back of lining or shotcrete are very important elements for inspecting the safety of tunnels. Therefore, the inspection of tunnel lining structure means to investigate the inner layer boundaries of the structure. For this purpose, seismic reflection survey is the most desirable method if it works in good conditions. However, the conventional seismic reflection method can not be properly used for investigating thin layers in the lining structure. In other words, to detect the inner boundaries, it is desirable for the wavelength of source to be less than the thickness of each layer and for the receiver to be capable of detecting high frequency(ultrasonic) signals. To this end, new appropriate source and receiver devices should be developed above all for the ultrasonic reflection survey. This paper deals primarily with the development of source and receiver devices which are essential parts of field measuring system. Interests are above all centered in both the radiation pattern, energy, frequency content of the source and the directional sensitivity of the receiver. With these newly devised ones, ultrasonic physical modeling has been performed on 3-D physical model composed of bakelite, water-proof and concrete, The measured seismograms showed a clear separation of wave arrivals reflected from each layer boundary. Furthermore, it is noteworthy that reflection events from the bottom of concrete below water-proof could be also observed. This result demonstrates the usefulness of the both devices that can be applied to benefit the ultrasonic reflection survey. Future research is being focus on dealing with at first an optimal configuration of source and receiver devices well coupled to tunnel wall, and further an efficient data control system of practical use.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.26 no.2
• /
• pp.13-46
• /
• 2001

SDP (Semidefinite Programming), as a sort of “cone-LP”, optimizes a linear function over the intersection of an affine space and a cone that has the origin as its apex. SDP, however, has been developed in the process of searching for better solution methods for NP-hard combinatorial optimization problems. We surveyed the basic theories necessary to understand SDP researches. First, We examined SDP duality, comparing it to LP duality, which is essential for the interior point method, Second, we showed that SDP can be optimized from an interior solution in polynomial time with a desired error limit. finally, we summarized several research papers that showed SDP can improve solution methods for some combinatorial optimization problems, and explained why SDP has become one of the most important research topics in optimization. We tried to integrate SDP theories. relatively diverse and complicated. to survey research papers with our own perspective, and thus to help researcher to pursue their SDP researches in depth.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.449-454
• /
• 2003

The accurate mapping of the basement is one of the most crucial factors in construction of harbour facilities and bridges in the coastal areas. In shallow waters, the seismic reflection method often fails to image the basement geometry beneath the sediment cover in many cases. We present the result of a shallow marine seismic refraction survey using two ships, l2-channel hydrophone arrays deployed on the bottom and a borehole sparker or percussion powder as sources. Velocity structure could be computed by tomography algorithm since more than 6 different source points had been applied for one spread. The comparison of the results of the refraction survey with drilling logs demonstrates remarkable consistency in basement geometry. It thus appears that the refraction method in this study is an efficient and cost-effective way to investigate the basement structure in coastal area, river, and lake.