• Journal of the Daesoon Academy of Sciences
• /
• v.22
• /
• pp.277-316
• /
• 2014

Many ideas which have appear in human history ought to be fruits of the relevant time, however they sometimes reveal new meaning. Daesoon idea is like that, and anarchism also has been resurgent today according to the demand of the time. Both ideas aim at an ideal society. They are not codes of conduct by specific ideology, but are the spirit of resistance against all kinds of oppression, i.e. which began from human nature. Anarchism refuses intellectual revolution theory or idea, but it wants only the life of human nature. Therefore, in spite of the diversity of its historic type, anarchism is in the same discussion as idealism e.g. religion, politics, etc. which have seek the essence of human life. Daesoon idea, as well, begins from religious idealism, it kindles the same discussion as anarchism. Particularly, anarchism is receiving attention with its spirituality of the new century. If so, it will be a critical help for the development of Daesoon idea to consider such newness through a conversation with anarchism. A comparison between Daesoon idea and anarchism is mainly a conversation about the ideology of ideal society. The researcher intended to investigate the viewpoint of anarchism in terms of comparing its personality, society and nation with Daesun idea, though it was not easy work since the ideological genealogy of anarchism is various. Both of them have a mental attitude, i.e. 'essential resistance', on the basis of such introspection. The spirit of resistance is an essence of man and the right of resistance is a basic human rights that insist the dignity of man. When the right of resistance reaches the essence of human life, it becomes an ideal thought and religion. Also, the ideal can be finally realized when the spirit of resistance becomes the power of practice by actualizing it as the right of resistance.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.6
• /
• pp.586-595
• /
• 2012

While the extruded cement panel has many advantages compared to drywall, it has limited applicability in buildings due to its low fire resistance. However, an extruded panel in which the fire resistance has been dramatically enhanced through the addition of a-hemihydrate gypsum is expected to become widely applied as a partition wall or interior material for buildings. To ensure its applicability, certain safety requirements for use, such as the leaning load by residents, the impact by indoor articles, and the fire, need to be taken into consideration. The purpose of this study is to review the impact load resistance, horizontal load resistance, and fire resistance as required safety properties for the partition wall and interior materials of the extruded panel that includes a-hemihydrate gypsum. The results of this study show that the impact load resistance of the extruded panel that includes a-hemihydrate gypsum achieves SD grade for industrial buildings, and the horizontal impact load resistance achieves HD grade for public buildings. In addition, it provides fire-resistance for approximately 7 minutes longer than the existing extruded cement panel. Based on this result, it is confirmed the extruded panel incorporating a-hemihydrate gypsum has adequate safety properties for use as partition wall or interior material.

• 전기의세계
• /
• v.23 no.6
• /
• pp.56-59
• /
• 1974

It is well-known that the anode circuit of SCR has the current controlled negative resistance characteristic. Recently the present auther has shown that the gate circuit of SCR has the voltage controlled negative resistance characteristic for the constant anode voltage. It is shown of the equivalent model to SCR(when conducting) the voltage controlled negative resistance characteristic for gate circuit. And it is possible to make SCR gate oscillators with their desired characteristic for illustration.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.5.1-5.1
• /
• 2009

Organic photovoltaic (OPV)cells have attracted considerable attention due to their potential for flexible, lightweight, and low-cost application of solar energy conversion. Since a 1% power conversion efficiency (PCE) OPV based on a single donor-acceptor heterojunction was reported by Tang, the PCE has steadily improved around 5%. It is well known that a high parallel (shunt)resistance and a low series resistance are required simultaneously to achieve ideal photovoltaic devices. The device should be free of leakage current through the device to maximize the parallel resistance. The series resistance is attributed to the ohmic loss in the whole device, which includes the bulk resistance and the contact resistance. The bulk resistance originated from the bulk resistance of the organic layer and the electrodes; the contact resistance comes from the interface between the electrodes and the active layer. Furthermore, it has been reported that the bulk resistance of the indium tin oxide (ITO) of the devices dominates the series resistance of OPVs for a large area more than $0.01\;cm^2$. Therefore, in practical application, the large area of ITO may significantly reduce the device performance. In this work, we investigated the effect of sheet resistance ($R_{sh}$) of deposited ITO on the performance of OPVs. It was found that the device performance of polythiophene-fullerene (P3HT:PCBM) bulk heterojunction OPVs was critically dependent on Rsh of the ITO electrode. With decreasing $R_{sh}$ of the ITO from 39 to $8.5\;{\Omega}/{\square}$, the fill factor (FF) of OPVs was dramatically improved from 0.407 to 0.580, resulting in improvement of PCE from $1.63{\pm}0.2$ to $2.5{\pm}0.1%$ underan AM1.5 simulated solar intensity of $100\;mW/cm^2$.

• Steel and Composite Structures
• /
• v.8 no.6
• /
• pp.491-510
• /
• 2008

This paper presents a plan and guidelines that were drawn for Korean based research carried out on the fire-resistance of CFT columns. This research was carried out by reviewing the Korean regulations related to the fire-resistance of CFT columns and examining studies which had been made in Korea as well as overseas. The first phase of the study plan was to compare the fire-resistance of square CFT columns without fire protection (obtained through fire-resistance tests and numerical analyses) with estimated values (obtained through fire-resistance design formulas proposed in Korea and overseas). This comparison provided conclusions as outlined below. Fire-resistance tests conducted in this study proved that, when the actual design load is taken into consideration, square CFT columns without fire protection are able to resist a fire for more than one hour. A comparison was made of test and analysis results with the fire-resistance time based on the AIJ code, the AISC design formula and the estimation formula suggested for Korea. The results of this comparison showed that the test and analysis results for specimens SAH1, SAH2-1, SAH2-2 and SAH3 were almost identical with the AIJ code, the AISC design formula and estimation formula. For specimens SAH4 and SAH5, the estimation formula was more conservative than the AIJ code and the AISC design formula. It was necessary to identify the factors that have an influence on the fire-resistance of CFT columns without fire protection and to draw fire-resistance design formulas for these columns. To achieve this, it is proposed that numerical analyses and tests be conducted in order to evaluate the fire-resistance of circular CFT columns, the influence of eccentricity existing as an additional factor and the influence of the slenderness ratio of the columns. It is also suggested that the overall behavior of CFT structures without fire protection within a fire be evaluated through analysis simulation.

• Journal of Power Electronics
• /
• v.19 no.3
• /
• pp.751-760
• /
• 2019

Since parameter mismatch seriously impacts the efficiency and stability of induction motor drives, it is important to accurately estimate the rotor and stator resistance. This paper introduces a method to directly calculate the rotor flux that is independent of stator and rotor resistance and electrical angle. It is based on obtaining the rotor and stator resistance using the model reference adaptive system (MRAS) method. The method has a lower computation burden and less adaptation time when compared with other rotor resistance estimation methods. This paper builds three coordinate frames to analyze the rotor flux error and rotor resistance error. A number of implementation issues are also considered.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.217-218
• /
• 2019

Fire resistance ceiling system is the structure of which the ceiling installed under the slave of the structure has the fire resistance performance. Because of having the fire resistance performance, fire resistive coatings on steel beams can be reduced and large span structures can be constructed. So, it have advantages of convenience for construction, shorten for construction time and cost reducing. In foreign country, it is general that one system consisting of slave and ceiling is constructed as a fire resistance system, in these cases, gypsum boards are mostly used as ceiling materials. The purpose of this study was to explain the possibility of expanding the use of gypsum boards by securing fire resistance performance of these ceilings.

• Journal of Information Technology Services
• /
• v.12 no.4
• /
• pp.1-23
• /
• 2013

This study examines whether key characteristics of cloud computing services would affect the intention of use for personalized cloud computing services. The research model was generated based on Technology Acceptance Model (TAM) with resistance variable, and verified statistically by undertaking a survey about the perception of personal users. As the results of this analysis, we could find the structural relationship among the factors affecting adoption of the cloud computing service. We found that the expectation of ubiquity as a representative function of the cloud computing service meaningfully affected the perceived ease of use and resistance, and that the relativeness with existing services also meaningfully affected the perceived ease of use, but not the resistance. In addition, the moderating effects of use experience in the path leading from the perceived ease of use and resistance to the intention of use were identified. This study will provide diverse implications for the companies providing personalized cloud computing services.

• Journal of Pharmaceutical Investigation
• /
• v.24 no.4
• /
• pp.281-287
• /
• 1994

The effects of oleic acid, propylene glycol and 5% (w/w) oleic acid in propylene glycol on the electrical properties of hairless mouse skin were studied and the results were compared. The complex electrical impedance was measured as a function of frequency, and resistance and capacitance were determined from the Nyquist plot. Immediately after the treatment with oleic acid, resistance was 145% of the pretreatment value. However it decreased with time and, after 20 hours, it was about 25% of its pretreatment value. Capacitance increased; immediately after the treatment, it was about 125% of pretreatment value and it seemed to increase slowly with time. When the skin was treated with propylene glycol, resistance decreased about 5O% and capacitance increased about 65%. Similar results were observed when the skin was treated with 5% (w/w) oleic acid in propylene glycol, except that the magnitude of resistance drop was much larger. Oleic acid acted synergistically with propylene glycol. Together with the flux data in the literature, the results obtained in this work indicate that electrical resistance is closely related to the permeability of drug molecules through the skin. The results are discussed in terms of the mechanism of action of these penetration enhancers. Overall, this work provided further mechanistic insight into the role of SC lipids in skin resistance and capacitance.

• Management & Information Systems Review
• /
• v.23
• /
• pp.233-260
• /
• 2007

Now a day, Information and its related system has been more important in our competitive environment. In this situation, there is also an important thing that we must take into consideration, that's the employer's resistance. Until now we have little material concerning the issue, user's resistance. Owing to that, it's a little hard to study the user's resistance against the IS. Dealing with the resistance effectively helps companies save a great deal of cost and build the information system successfully. This paper takes the Markus's theories about user's resistance. According to the theories, there are three keys theories affecting resistance. To sum this, people-oriented theory, system-oriented theory and Interaction theory. To complement the theories, this paper includes another theories related with resistance and takes total seven factors causing user's resistance. Among these seven factors, four factors have a meaningful effect on the user's resistance, that is, Self-efficacy, System Complexity, Threat of the one's status and politics and System Staff's service quality. Managers and system-related company should keep it in mind very carefully, and I hope they make the best use of the result of this study.