• Journal of Construction Engineering and Project Management
• /
• v.3 no.4
• /
• pp.12-19
• /
• 2013

Green Frame is an environmentally friendly column-beam system composed of composite PC members that can increase buildings' life spans while reducing resource consumption. Typically, connections of PC and RC columns occur at the boundaries of each floor, which is at the upper section of slabs, causing the boundary of each floor to generate the maximum moment. Although it is not optimal in terms of structural safety to connect members at a location where the moment is high, this approach is highly adopted due to its constructability. We propose that a superior approach that employs the concept of connecting columns at the low bending moment zone can be applied to quickly and safely install green columns, the main structural members of Green Frame. Connection of green columns at the low bending moment zone can be classified into three techniques, depending on the method of reinforcing the joints, which have different connection characteristics and construction methods. Research is needed to compare the features of each method of reinforcing the joints so that the most appropriate column connection method can be chosen for the site conditions. This study aims to confirm the structural safety of the connection component at the low bending moment zone and to compare and analyze the construction duration, unit price, quality and safety performance of each column connection method. The study results are anticipated to activate the use of composite precast concrete and to be used as development data in the future.

• The KIPS Transactions:PartD
• /
• v.12D no.7 s.103
• /
• pp.1039-1048
• /
• 2005

A software configuration management(SCM) is essential for processing large scale project. The scope of SCM involves each developer's work space management, software building management, and development process control as wet] as version control. In this paper we focus on what parts should be controlled systematically for the optimized software build that is an important part of the SCM. We also analyze that to increase the efficiency of software build, what kind of configuration management information should be reported. Based on the analysis, we have actually designed and implemented a new reporting system and evaluated it. The evaluation includes comparative evaluation in efficiency based on the analysis about the related functions provided by existing tools and some additional qualitative evaluation through the questionnaires from stakeholders.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.2
• /
• pp.369-376
• /
• 2018

The majority of construction projects, from the initiation phase to the project completion and operation phase, are influenced by various types of corruption. Iran, as a developing country, has been suffering from this issue in bidding, tendering procedure, contracts etc. Therefore, due to the importance of this issue, this study attempted to identify the causes of corruption and evaluate the most significant factors in the construction projects in Iran. To this aim, an intensive literature review was performed to investigate the various types of corruption and identify the potential factors causing corruption in construction projects. The questionnaire survey was designed, considering twelve forms of corruption, including 77 causes of corruption in construction projects in Iran. Out of 220 distributed questionnaires, 188 were returned by the participants. The valid collected data sets were analyzed and then Exploratory Factor Analysis was applied. It was discovered that "Inappropriate power-sharing," "Lack of obligation for human resources to properly use resources and abide by the rules and regulations" and "Lack of any monitoring of the government's performance" are the most significant factors. Findings from the study would be valuable for the construction projects authorities and academia in order to combat corruption in the construction projects.

• Journal of Engineering Education Research
• /
• v.13 no.6
• /
• pp.180-187
• /
• 2010

Design and management of information and industrial engineering (DMIIE) is a project-oriented junior/senior class that integrates the methodologies of industrial and information engineering in order to solve real-world problems. It examines social issues, engineering approaches to solve the problems and business models that can generate sustainable value for society. This course help students use their engineering knowledge to assess and solve the problems faced by local community. By conducting real-world projects, students get an opportunity to refine their oral and written communication skills. In this paper, the experience of DMIIE course is presented. The effects of the community-based learning for a senior design course are discussed. The possibility of using this blended type of design course to meet the ABEEK outcomes is also stated.

• Publications of The Korean Astronomical Society
• /
• v.27 no.5
• /
• pp.391-397
• /
• 2012

The SPICA (SPace Infrared Telescope for Cosmology & Astrophysics) project is a next-generation infrared space telescope optimized for mid- and far-infrared observation with a cryogenically cooled 3m-class telescope. It will achieve the high resolution as well as the unprecedented sensitivity from mid to far-infrared range. The FPC (Focal Plane Camera) proposed by KASI as an international collaboration is a near-infrared instrument. The FPC-S and FPC-G are responsible for the scientific observation in the near-infrared and the fine guiding, respectively. The FPC-G will significantly reduce pointing error down to below 0.075 arcsec through the observation of guiding stars in the focal plane. We analyzed the pointing requirement from the focal plane instruments as well as the error factors affecting the pointing stability. We also obtained the expected performance in operation modes. We concluded that the FPC-G can achieve the pointing stability below 0.075 arcsec which is the requirement from the focal plane instruments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9A
• /
• pp.656-663
• /
• 2009

In 3GPP LTE system downlink, PSS (primary synchronization signal) and SSS (secondary synchronization signal) sequences are used for initial cell search and synchronization. UE (user equipment) detects slot timing, frequency offset, and cell ID by using PSS. After that it should detect frame timing, cell group ID, and CP length by using SSS. But in 3GPP LTE, there are two kinds of CP length, so we should operate FFT twice. In this paper, to minimize SSS detection complexity in cell searcher, we propose a CP length pre-decision algorithm that reduces the arithmetical complexity by half at most, with negligible performance degradation.

• Journal of The Korean Astronomical Society
• /
• v.50 no.4
• /
• pp.125-129
• /
• 2017

We investigate the solar cycle variation of microwave and extreme ultraviolet (EUV) intensity in latitude to compare microwave polar brightening (MPB) with the EUV polar coronal hole (CH). For this study, we used the full-sun images observed in 17 GHz of the Nobeyama Radioheliograph from 1992 July to 2016 November and in two EUV channels of the Atmospheric Imaging Assembly (AIA) $193{\AA}$ and $171{\AA}$ on the Solar Dynamics Observatory (SDO) from 2011 January to 2016 November. As a result, we found that the polar intensity in EUV is anti-correlated with the polar intensity in microwave. Since the depression of EUV intensity in the pole is mostly owing to the CH appearance and continuation there, the anti-correlation in the intensity implies the intimate association between the polar CH and the MPB. Considering the report of Gopalswamy et al. (1999) that the enhanced microwave brightness in the CH is seen above the enhanced photospheric magnetic field, we suggest that the pole area during the solar minimum has a stronger magnetic field than the quiet sun level and such a strong field in the pole results in the formation of the polar CH. The emission mechanism of the MPB and the physical link with the polar CH are not still fully understood. It is necessary to investigate the MPB using high resolution microwave imaging data, which can be obtained by the high performance large-array radio observatories such as the ALMA project.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.20 no.7_spc
• /
• pp.443-451
• /
• 2016

A Gyeongju earthquake in the magnitude of 5.8 on the Richter scale (the moment magnitude of 5.4), which was recorded as the strongest earthquake in Korea, occurred in September 12, 2016. Compared with the 2011 Virginia earthquake, the moment magnitude was slightly smaller and its duration was 3 seconds, much shorter than 10 seconds of the Virginia earthquake, resulting in relatively minor damage. But the two earthquakes are quite similar in terms of the overall scale, unexpectedness, and social situation. The North Anna Nuclear Power Plant, which is a nuclear power plant located at 18 km away from the epicenter of the Virginia earthquake, had no damage to nuclear reactors because the reactors were automatically shut down as the design basis earthquake value was exceeded. Ground accelerations of the 2016 Gyeongju earthquake did not exceed the threshold value but the manual shutdown was carried out so that Wolsong Nuclear Power Site was not damaged. Damaged historic homestead house and masonry structures due to the Virginia earthquake have been repaired, reinforced, and rebuilt based on a long-term earthquake recovery project. Likewise, it will be necessary to carefully carry out an earthquake recovery planning program to improve overall seismic performance and to reconstruct the historic buildings and structures damaged as a result of the Gyeongju earthquake.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.3C
• /
• pp.215-223
• /
• 2003

Turbo codes are selected as FEC(Forward error correction) codes with convolution code in 3GFP(3rd generation partnership project) and 3GPP2 standard of IMT2000. Especially, l/3 turbo code with K=4 is employed for 3GPP standard. In this paper, we proposed a hardware structure of a turbo decoder and denveloped the decoder for 3GPP standard turbo code. For its efficient operation, we design a SOVA decoder by employing a register exchange decoding block and new path metric normalization block as a SISO constituent decoder. In addition, we estimate its performance under MATLAB 6.0 and designed the turbo decoder including control block, input control buffer, SOVA constituent decoder with VHDL. Finally, we synthesized the developed turbo decoder under Synopsys FPGA Express and verified it with ALTERA EPF200SRC240-3 FPGA device.

• Journal of Digital Convergence
• /
• v.12 no.3
• /
• pp.263-268
• /
• 2014

The purpose of this study is to provide a quantitative evaluation index of object-oriented software development productivity for EJB 3.0 and EJB 3.1. A lightweight container architecture is a newly-developed architecture in order to solve demerits that N-Tiers enterprise architecture has and to support merits therein. A lightweight container architecture is not as heavy as EJB(Enterprise JavaBeans) architecture is, whereas it provides all the functionality of the EJB container. However, there have been insufficient studies on a performance evaluation of EJB 3.0 and EJB 3.1 on an identical platform. Since a quantitative analysis has been performed only with respect to a partial LoC(Line of Code) analysis, there have been insufficient objective evaluation indeces and guidelines for a new specification released. Accordingly, there has been limited evaluation of software development productivity and on new innovations in a project. Therefore, this study designed and implemented a movie reservation system in EJB 3.0 and EJB 3.1, which was based on the same development platform environment. This study then intends to provide evaluation guidelines for an objective software development productivity cl LoC(Lineand standardization thereof by development platform environment.