• 국제학술발표논문집
• /
• The 2th International Conference on Construction Engineering and Project Management
• /
• pp.424-432
• /
• 2007

The last twenty-five years have seen dramatic improvements in and widespread use of IT to describe and document the work of the many disciplines involved in construction projects. Iran is a developing country and construction is a basic factor of developing too. Hence, the country needs to a special programming for construction of buildings, structures and infrastructures. Many parts of Iran are located in highly seismic zones and structures must be constructed safe e.g., according to recent seismic codes. In this paper opportunities of IT in construction industry of Iran are investigated in three categories. Pre-construction phase, construction phase and earthquake disaster mitigation are studied. Studies show that information technology can be used in these items for reducing the losses and increasing the benefits. Both government and private sectors must contribute to this strategic project for obtaining the best result.

• 한국안전학회지
• /
• 제37권3호
• /
• pp.34-44
• /
• 2022

This study analyzed the smart construction safety cost included in safety management plans that are approved before construction. Specifically, it refers to the cost incurred in constructing and operating a safety management system using wireless communication and facilities. Based on the obtained statistical results, an activation policy for the inclusion of the smart construction safety cost in building safety management plans was proposed. The smart construction safety cost must be included in the safety management cost; notably, this is mandated by the Construction Technology Promotion Act. However, there are some problems with the inclusion of smart construction safety costs. To analyze the problems encountered when calculating the smart construction safety cost and including it in safety management plans, in this study, statistical analysis was performed using the data of 1,334 safety management plans received at the Construction Safety Management Integrated Information (CSI) from June to August 2021. The results show that only 50.7% of the safety management plans included the smart construction safety cost although the current law mandates 100% inclusion of these costs. Thus, it is apparent that the smart construction safety costs are only included in a low proportion of sites. In addition, the calculated smart construction safety costs were shown to have a small correlation with the construction cost; moreover, they appeared to be distributed at a constant cost level. In this context, it is believed that perfunctory cost calculations were performed at most sites since the effect of the construction cost on the smart construction safety cost was negligible. Therefore, it is necessary to improve the inclusion of smart construction safety costs by strengthening the authorization process of the approval institute of safety management plans. In addition, institutional support, such as guidelines that promote the calculation and inclusion of appropriate smart construction safety costs according to the characteristics of sites, are needed.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2001년도 학술대회지
• /
• pp.513-518
• /
• 2001

국내 건설프로젝트는 점차 대형화·복잡화 되어가고 있으며, 과거에 비해 더욱 방대한 양의 건설정보가 생성되어 공사관리에 이용되고 있는 추세이다. 그러나, 기존의 건설프로젝트 관리체계 하에서는 현장에서 발생되는 정보를 수집·관리함에 있어 대부분 이를 기술자들의 경험과 수작업에 의존하고 있으며, 결국 이로 인한 현장 정보의 신뢰도 결여는 건설정보의 재 입력을 통한 공사관리 업무의 비효율성을 초래하고 있는 실정이다. 최근 건설을 포함한 다양한 산업분야에 걸쳐 컴퓨터를 기반으로 IT기술을 응용하는 제반 연구가 활발히 진행되고 있으며, 다양한 가시적인 성과를 이루어 내고 있다. 따라서, 본 연구에서는 건설현장에서 발생하는 정보의 수집 및 활용에 대한 문제점을 규명하고 건설정보 관리와 관련한 연구동향과 적용사례를 살펴본 후, 건설정보 수집 도구로써의 IT 기술 및 적용 분야를 분석하여 국내 현장 관리체계에 적합한 IT 기술 도입 방안을 제시하고자 한다. 또한 본 연구의 결과는 향후 국내 건설산업에 있어 효율적 공사관리 및 실적자료의 구축을 위한 기반 환경을 제공할 수 있을 것으로 사료된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 추계 학술논문 발표대회
• /
• pp.257-260
• /
• 2009

With the current global financial crisis, Korea's economic situation involves a great deal of uncertainty. As the construction industry in Korea has traditionally been one of the country's strongest engines of economic development, it is crucial to understand its current status when establishing government policy or corporate goals. Utilizing a variety of statistical data related to construction that has been published in Korea, this study analyzes the current status and performance of the industry in terms of technological development. Although it was found that the construction industry in Korea is currently unstable due to the influence of the global financial crisis, it is now expected to recover quickly thanks to the increase in the number of construction contracts in foreign countries. In addition, when the performance of national research and development is realized, it is expected that new construction technologies will contribute to the recovery of the Korean construction industry. Despite the benefits of construction contracts in foreign countries, there are harmful practices in the industry that need to be addressed, including the excessively fierce competition among domestic construction companies.

• 한국산업융합학회 논문집
• /
• 제25권6_3호
• /
• pp.1207-1219
• /
• 2022

「Act On Contracts To Which The State Is A Party」 stipulates that the "Construction Standard Production Rate" and "Construction Standard Unit Price" be used as the criteria for determining the estimated price of construction works performed by public institutions. In this regard, issues such as the application scope of the Construction Standard Unit Price, and the effect of budget reduction continue. However, due to the lack of quantitative data on the actual application of Construction Standard Unit Price, it is difficult to objectively evaluate various issues. In order to prepare data for objective evaluation of the Construction Standard Unit Price, this study analyzed the ripple effect of applying the Construction Standard Unit Price based on the bill of quantity. As a result of the analysis, the Construction Standard Unit Price ripple effect in the civil engineering part was 9.2%, and it was analyzed that there was a ripple effect of about 1.9% based on the civil engineering direct cost. In the construction part, the ripple effect was analyzed to be relatively high at 17%, but it was found to have a ripple effect of about 3% in the construction direct cost. Based on the total direct cost, the ripple effect was calculated as 2.2%. Based on the analysis results, it is possible to evaluate the effect of applying the Standard Market Unit Price, and it is expected to be used as basic data to solve issues. As a future study, it is necessary to additionally analyze the ripple effect by Standard Market Unit Price application range (over 10 billion, over 20 billion won, etc.) and delivery system type (comprehensive evaluation, qualification examination, technical bidding, etc.). In addition, it is necessary to study the appropriate ripple effect of the Standard Market Unit Price.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.1209-1215
• /
• 2009

Recently, Construction Projects are being much bigger and more complex. So the importance of Construction Planning and Management is increasing and increasing because of the Construction Projects is involved in a variety of construction-related subjects. Competitive of the Construction Industry decided Cost, Construction Duration and Productivity. But they were just focused on Cost Saving instead of Construction Duration and Productivity. However, they have to finish construction projects using minimum cost and duration with quality and function of required level for successful Construction projects. Thus, current high exchange rate and high period, it is clear to decrease construction cost and to do economic construction in huge Construction Projects and it means more advanced Construction Schedule Management needs for economic construction. But Construction Scheduling Planning, basic of Construction Schedule Management, adjusted contract period without Pre-Planning, just depending on experience and ability of Construction Engineer. Because of that, this study suggests new Duration Estimate Method using Stochastic Model in BIM Environment for advanced Construction Schedule Management. Existing Duration Estimate Methods are just modified wrong points of them or analyzed effective factors of construction schedule. However, New Duration Estimate Method is just consists of Stochastic Model and BIM Environment without existing Duration Estimate Methods. So, new method has creativity and specialty. After this research, it would be a great model in construction industry field.

• 한국인터넷방송통신학회논문지
• /
• 제20권6호
• /
• pp.93-99
• /
• 2020

건설공사에 있어 가설공사는 그 중요성에 비해 전체공사에 차지하는 공사 금액이 낮고 공사 완료 후에는 철거되므로 다른 공종에 비해 상대적으로 비중이 작게 취급 되는 공종이다. 실제 현장에 근무한 건설기술자들은 공사의 품질과 공사의 안전을 확보하기 위해 여러 공정중 가장 중요한 공종으로 가설공사의 안전을 이야기 한다. 하지만, 가설공사는 공사 진행에 따라 공사현장 여러곳에서 동시에 여러 종류의 가설재가 설치되고, 그것을 사용하여 본 공사가 진행되기 때문에 안전관리가 어려운 것도 사실이다. 건설공사의 안전사고는 거의 가설공사에서 이루어진다고 해도 크게 틀리지는 않는다. 최근 들어 건축물이 대형화, 다양한 복합용도, 대규모 지하공간의 굴착. 초고층으로 바뀌어가는 건설 추세로 보아 가설공사의 중요성과 안전성은 절대 소홀히 할 수 없다. 본 연구의 목적은 IT 기술을 이용하여 건설공사에서 사용되는 가설자재중 동바리의 안전 확보를 연구목적으로 하며 가설공사의 안전사고를 방지하는 안전관리를 제안 하고자 한다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.219-220
• /
• 2021

It is considered that the construction industry is one of the pivotal players in the national economy in terms of Gross Domestic Production (GDP) and employment. Behind the positive role of this industrial sector to the national economy, the construction industry generates approximately 50 % of the total waste generation from all the industrial sectors. There are several measures to mitigate the adverse impacts of the construction waste such as reduce, reuse and recycle. Recycling would be one of the effective strategies for waste minimisation, which would be able to reduce the demand upon new resources as well as enhance reusing the construction materials on sites. The automated construction waste classification system would make it possible not only to reduce the amount of labour input but also mitigate the possibility of errors during the manual classification process. In this study, we proposed an automated waste segmentation and classification system for recycling the construction and demolition waste in the real construction site context. Since the practical application to the real-world construction sites was one of the significant factors to develop the system, a YOLACT (You Only Look At CoefficienTs) algorithm was chosen to conduct the study. In this study, it is expected that the proposed system would make it possible to enhance the productivity as well as the cost efficiency by reducing the manpower for the construction and demolition waste management at the construction site.

• 국제학술발표논문집
• /
• The 4th International Conference on Construction Engineering and Project Management Organized by the University of New South Wales
• /
• pp.221-228
• /
• 2011

As construction works have become larger and more complex, improving productivity by introducing Information Technology (IT) is pursued and more effective construction management is needed in construction industry. In this circumstance, many different kinds of project management system is being introduced, and various IT technologies are applied such as Personal Digital Assistant (PDA), Bar Code, Radio Frequency Identification (RFID), Web Camera, and so on. However, these kinds of technologies might cause re-processing of information and ineffectiveness of project because of lack of real time information processing technology or separation between construction sites and management offices. Meanwhile, these technologies rather decrease the construction productivity except for the data saving and database function. Therefore, this research aims to develop Application that can be applied efficiently for construction material management, by understanding problems of former management system with questionnaires and extracting functions with analysis of requirements. In virtue of the construction material management Application which will be developed in this study, it will be possible to input information automatically, to process and check material information in real time, and to identify the location of necessary material. Then, the problem of separation between construction sites and management offices are solved, and as a result, more efficient management of materials in construction sites will become possible. At the same time, this study will investigate the possibility and applicability of new IT device, Smart Phone to construction sites.

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.437-446
• /
• 2005

Recently as people's values are changing from development phase into running stage after quality of life, so that the needs of environmentally friendly construction are gradually increasing. Also populace discontent about the pollution during construction process such as the noise and vibration caused by construction machinery is increasing. Even though it is impossible to eliminate the construction pollution fully, it is necessary to make efforts to reduce construction pollution to a minimum. In terms of construction site operating, the first possible step for solving these matters directly is that the necessary sum of expenses must be secured as the environmental management costs in the conceptual phase. However, in fact, the environmental management costs have not been secured in the budget. Generally it is the major reason not arising proper activities to prevent the pollution in the construction site. The purpose of this research is to suggest the efficient budgeting method regarding Environmental management costs to ensure the necessary sum of environmental management expenses. To provide an efficient budgeting method, interviews with the person in charge of environment management was conducted. 78 construction sites was surveyed and environmental management costs were analyzed through their historical data from the survey. According to the results of analysis, the ratio of environmental management costs is revealed 0.45% of construction cost as average comparing 0.2% of legal limit. And usually the environmental management cost was appropriated into the safety management budget. So it is needed to isolate environmental management budget securely and modify the ratio of Environmental conservation Costs in Construction Technology Management Act.