• 기술혁신학회지
• /
• 제9권2호
• /
• pp.279-303
• /
• 2006

본 논문에서는 한국의 IT 기기산업 특히 IT 기기 수출에 대해 다룬다. 현재 IT 기기 수출은 한국 전체 수출의 약 30%를 차지하고 있으며, 더욱이 IT 기기 수출 규모는 매년 증가하고 있다. 한국 경제에 IT 기기 수출이 미치는 영향력은 매우 엄청나다고 볼 수 있다. 그러나 이러한 영향력에 대한 연구는 쉽게 발견할 수가 없다. 본 논문에서는 산업연관분석을 사용하여 2002년부터 2005년까지 IT 기기 수출이 국내 산업에 미치는 경제적 파급효과를 분석한다. 이를 위해 한국의 IT 기기 수출의 현황에 대해 요약하여 제시하고, 다양한 수준에서의 IT기기 수출의 경제적 파급효과 분석결과를 제시한다.

• 디지털산업정보학회논문지
• /
• 제9권1호
• /
• pp.79-86
• /
• 2013

In this paper which it is relating to the DSRC system based road side equipment, we propose the protocol stack architecture of road side equipment and the process structure of the main RM, L7 and LLC layers which is road side equipment device as well. And also we design the signal flow and data-transfer process as well between road side equipment and on board equipment to describe the installation process between road side equipment and von board equipment based on DSRC system. Thus, it is possible to provide various application services between intelligent transportation systems of road side equipment and local server, as well as it enables the local server managing the memorys of on board equipment which entry in service area thru the road side equipment.

• 국제학술발표논문집
• /
• The 10th International Conference on Construction Engineering and Project Management
• /
• pp.1010-1017
• /
• 2024

A data center stores and manages internet data. The data center is mainly comprised of IT equipment, cooling systems, and other components. IT equipment is used for storing and processing internet data, generating heat during use. If the heat generated by IT equipment is not removed, it can cause malfunctions, and cooling systems are used to remove this heat. Cooling systems account for more than 40% of the total energy consumption and reducing cooling energy can reduce the overall energy consumption of the data center. Therefore, analyzing the cooling energy consumption according to heat generation changes caused by IT equipment in the data center is necessary. This study analyzed the impact of heat generation changes in IT equipment on cooling energy consumption. Additionally, three different economizer control methods were applied to select the optimal economizer control method. To achieve this, a data center model with economizer systems applied was developed using data measured from IT equipment and cooling systems. As a result, as the operation rates of IT equipment increased from minimum to maximum, the annual energy consumption for each case increased by approximately 11.7%. The economizer analysis showed that the energy savings were greatest when dry bulb temperature control was applied, but it did not meet the operation environment of the IT equipment. Therefore, it was determined that economizer control to meet the operation environment of IT equipment is required to be enthalpy-based.

• 한국안전학회지
• /
• 제35권3호
• /
• pp.32-42
• /
• 2020

In this study, in order to secure the necessity of introducing the safety certification system for the assembled temporary equipment and materials, the feasibility of the introduction was analyzed through literature review, structural analysis, and actual experiments and surveys related to the assembled temporary equipment and materials. In the previous studies, it was found that the research on the assembled temporary equipment and materials was insufficient, and it was possible to grasp the necessity of introducing the safety certification system for the assembled temporary equipment and materials. In addition, in the results of the serious accident analysis, it was found that the soundness of the temporary equipment and materials is determined by the structural characteristics after it was assembled. As a result of the feasibility analysis of the introduction of the safety certification of the assembled temporary equipment and materials through structural analysis, it is possible to effectively and rationally reflect the main geometrical influence factors, and to introduce the safety certification system that can test the procedures and procedures of the assembled temporary equipment and materials and based on it. It was found that there is a need. As a result of feasibility analysis on the necessity of introducing the safety certification system for assembled temporary equipment and materials through actual experiments, the existing single member performance evaluation has limitations in evaluating the structural performance of the assembled temporary equipment and materials. It was found that there is a need to introduce a safety certification system. As a result of gathering opinions on the feasibility of introducing the safety certification system for assembled temporary equipment and materials of manufacturers and users through the survey, it was found that the overall positive response result was high and the effectiveness was high.

• 디지털산업정보학회논문지
• /
• 제8권4호
• /
• pp.135-142
• /
• 2012

DSRC system is a communication system that consists of road side equipment and on board equipment to provide services of communication technology for intelligent transportation systems. In this paper, we carry out a short-range dedicated high-speed wireless communications via DSRC system based on board equipment that is installed in the vehicle and road side equipment through wireless channels of communication. on board equipment is system that have a memory which initialization information is stored, it loads physical layer and MAC layer, LLC layer, L7 layer in turn. In the upper, it should analyze the various commands that are sent from roadside base stations, and carry out the operation which is in accordance with the command. and also it designs the structure of protocol stack which is TRM Layer loaded that is to initialize on L7 layer and MAC layer and efficiently designs operation between on board equipment and the road side equipment.

• 무역상무연구
• /
• 제75권
• /
• pp.159-177
• /
• 2017

In this paper, we examined trends and regulations of the global medical equipment industry through literature search. The medical equipment industry is attracting attention as a new growth engine in the Fourth Industrial revolution. However, the medical device industry is a highly competitive field due to product diversity, short product life cycle and technological advances. In addition, Medical equipment are related to human health and safety. Therefore, it can only be exported if it is approved by national or international standards. Therefore, from the development stage of the product, the medical equipment should designate the country to be exported and develop a medical equipment that meets the requirements for licensing the medical equipment in the country. Therefore, In this paper, In this paper, we will present the practical considerations of the medical equipment exporting company by examining the global medical equipment market trends and the regulations related to medical equipment in major countries.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.938-943
• /
• 2006

The primary purpose of a computer room of data center and associated infrastructure is to support the operation of critical IT equipment. Traditionally, most owners of large critical data centers have been more than willing to accept a reasonable amount of computer room worker discomfort if necessary to support critical IT systems. All electrical equipment produces heat, which must be removed to prevent the equipment temperature from rising to an unacceptable level. Most information technology equipment and other equipment found in a data center or network room is air-cooled. Sizing a cooling system requires an understanding of the amount of heat produced by the equipment contained in the enclosed space, along with the heat produced by the other heat sources typically encountered.

• 한국컴퓨터정보학회논문지
• /
• 제22권8호
• /
• pp.1-7
• /
• 2017

In this paper, we proposed the test equipment that can perform separate performance tests to mass-produce the Automatic Test Equipment. Until now, the performance test of the ATE has been performed after it has been assembled perfectly. It is possible to perform the performance test only when the external device manufacturing and setting of measurement resources and the internal wiring work have been completed. So we have been studying test equipment that separately tested the switching devices that played a key role in the performance of the ATE. To build the test equipment, we reviewed the circuit card assemblies that make up the switching devices. We designed a test equipment that satisfies the performance test and apply the completed test equipment to the actual production process to analyze whether it was effective in improving the time and workability of the performance test. The test equipment has the advantage that it can be used universally in the mass production process of ATE with the same type of switching device.

• 한국해양학회지:바다
• /
• 제25권4호
• /
• pp.132-159
• /
• 2020

다학제적인 해양연구가 활발하게 수행됨에 따라 다양한 종류의 해양연구시설·장비가 매년 구입되고 있다. 그러나 해양 연구시설·장비 중, 환경자료 수집 및 시료채취 등에 사용하는 다양한 종류의 현장 관측장비들을 현재의 국가연구시설·장비 표준분류체계로 분류하여 관리하는 데 어려움이 있다. 한국해양과학기술원의 경우 미분류상태로 적절히 관리되지 않는 연구시설·장비가 약 30% 정도이다. 본 연구에서는 해양 연구시설·장비를 특성에 따라 중분류군 7개와 소분류군 36개로 분류하고, 국가연구시설장비 표준분류체계에 의해 해양 연구시설·장비를 효율적으로 관리하기 위해 '환경관측/분석장비'라는 대분류군을 국가연구시설장비 표준분류체계에 추가하기를 제안한다. 그리고 해양 연구시설·장비 중 실험실에서 운영하는 장비들은 기존의 국가연구시설장비 표준분류체계에 따라 분류할 것을 제안한다. 이를 통하여 우리나라 전체의 해양관련 연구시설·장비를 체계적으로 분류하여 효과적으로 관리할 수 있을 것으로 기대한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.994-1000
• /
• 2004

It is growing the application of the removal ground anchor with tension force for earth retaining constructions in the downtown. Nowadays, we can find the compression dispersion anchor on many site. But, it is occur some probelems in behabior of anchors because of impossible to tense p.c strand uniformly with existing equipment due to different length of p.c strand. So we tried to tense each p.c strand uniformly with auto back equipment in-situ test. This study compared and analyzed in-situ test results of an existing equipment with those of auto back equipment by appling elastic theory. As a result of the test, It has been proved that differences of tension force in the existing equipment increases with increasing the number of p.c strands. This can cause the ultimate failure of the concentrated p.c strand and the shear failure of ground. So it has been proved that auto back equipment is necessary.