• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.1
• /
• pp.37-42
• /
• 2021

The effect of chemical composition on the structural and thermal properties of TiZrN thin films was studied. As the Zr fraction in the deposited TixZr1-xN (x = 0.87, 0.82, 0.7, 0.6, and 0.28) increased, microstructural changes consisted of reduction in the grain size and a gradual transition from columnar structure to granular structure were observed. In addition, it was also confirmed that a gradual crystal phase transition from TiN to TiZrN has occurred as the Zr fraction increased up to 0.4. After heat treatment at 900℃, Ti0.82Zr0.18N and Ti0.7Zr0.3N layers were converted to a form in which rutile phase TiO2 and TiZrO4 oxides coexist, while Ti0.6Zr0.4N layer was converted to TiZrO4 oxide. Among the five compositions of TiZrN films, the Ti0.6Zr0.4N showed the best high temperature stability and produced a significant enhancement in the thermal oxidation resistance of Inconel 617 through suppressing the surface diffusion of Cr caused by thermal oxidation of the Inconel 617 substrate.

• Journal of Apiculture
• /
• v.32 no.3
• /
• pp.253-259
• /
• 2017

Propolis, natural antibacterial agent, which has been used traditional medicine across the globe, is resinous mixture to include abundant bioactive substances. In present study, we investigated antimicrobial activity according to quality characteristics of propolis collected from 9 different regions in Korea. Antimicrobial activity was evaluated by measuring growth inhibition zone using agar well diffusion method against Streptococcus mutans. Constituents analysis of propolis samples were measured through total phenolic contents, total flavonoid contents and quantitative analysis of major compound (pinocembrin) by ultra performance liquid chromatography. As a result, 9 different propolis (10mg/mL) and pinocembrin (1mg/mL) showed antimicrobial activity that has growth inhibition zone more than 11.9mm on S. mutans. The total flavonoid contents of 8 different propolis excluding Jeju island were in compliance with standard of health functional food in Korea and were found to affect antimicrobial activity on S. mutans when contained over 10mg/g. In addition, when content of pinocembrin in propolis was ranged from 12mg/g to 32mg/g, each propolis excluding Jeju island exhibited antimicrobial activity alike. These results indicate that pinocembrin plays a important role for antimicrobial activity of propolis collected from 8 different regions in Korea, and that it can be used as basic data for standardization of Korean propolis.

• Journal of dental hygiene science
• /
• v.20 no.4
• /
• pp.221-229
• /
• 2020

Background: The purpose of this study was to investigate the anti-oral microbial activity and anti-inflammatory effects of rosmarinic acid (RA) in lipopolysaccharide (LPS)-stimulated MC3T3-E1 osteoblastic cells on a titanium (Ti) surface during osseointegration, and to confirm the possibility of using RA as a safe natural substance for the control of peri-implantitis (PI) in Ti-based dental implants. Methods: A disk diffusion test was conducted to confirm the antimicrobial activity of RA against oral microorganisms. In order to confirm the anti-inflammatory effects of RA, inflammatory conditions were induced with 100 ng/ml of LPS in MC3T3-E1 osteoblastic cells on the Ti surface treated with or without 14 ㎍/ml of RA. The production of nitric oxide (NO) and prostaglandin E2 (PGE2) in LPS-stimulated MC3T3-E1 osteoblastic cells on the Ti surface was confirmed using an NO assay kit and PGE2 enzyme-linked immunosorbent assay kit. Reverse transcription polymerase chain reaction and western blot analysis were performed to confirm the expression of interleukin (IL)-1β and tumor necrosis factor (TNF)-α in total RNA and protein. Results: RA showed weak antimicrobial effects against Streptococcus mutans and Escherichia coli, but no antimicrobial activity against the bacteria Aggregatibacter actinomycetemcomitans and the fungus Candida albicans. RA reduced the production of pro-inflammatory mediators, NO and PGE2, and proinflammatory cytokines, TNF-α and IL-1β, in LPS-stimulated MC3T3-E1 osteoblastic cells on the Ti surface at the protein and mRNA levels. Conclusion: RA not only has anti-oral microbial activity, but also anti-inflammatory effects in LPS-stimulated MC3T3-E1 osteoblasts on the Ti surface, therefore, it can be used as a safe functional substance derived from plants for the prevention and control of PI for successful Ti-based implants.

• Journal of Life Science
• /
• v.31 no.8
• /
• pp.755-760
• /
• 2021

Swine diarrhea is a livestock disease that causes huge economic losses to pig farms. In general, diarrhea occurs because of the proliferation of pathogenic Escherichia coli (E. coli). The toxins produced by the proliferated E. coli cause edema in pigs. Although the proliferation of these coliforms can be prevented by using a vaccine, the vaccines containing chemically produced dead bacteria are not very effective, making it difficult to control the proliferation of E. coli. Therefore, there is a need to develop new, more effective vaccines. In this study, we prepared killed F4+ and F18ab+ E. coli, which induce diarrhea and edema in pigs, using the extracts of immune-induced silkworms containing antimicrobial peptides and examined their availability as a killed-bacteria vaccine. First, the antimicrobial activity analysis of the prepared immune-induced silkworm extract was conducted using the radial diffusion assay. The results showed high activity against both F4+ and F18ab+ E. coli. The production efficiency of E. coli dead cells was determined using the colony-counting method. The concentration of the E. coli dead cells was the highest (50 mg/ml) when treated at 4℃. In addition, the analysis of the prepared dead cells using a transmission electron microscope confirmed that E. coli leaked out of the cytoplasm and the cell membrane remained intact. Therefore, F4+ and F18ab+ E. coli produced using immune-induced silkworms extract are considered to be highly available as bacterial ghost vaccines that can help prevent swine diarrhea and the resulting edema.

• Journal of the Korean Society of Radiology
• /
• v.15 no.4
• /
• pp.507-518
• /
• 2021

Magnetic resonance imaging (MRI) is a key technology that has been seeing increasing use in studying the structural and functional innerworkings of the brain. Analyzing the variability of brain connectome through tractography analysis has been used to increase our understanding of disease pathology in humans. However, there lacks standardization of analysis methods for small animals such as mice, and lacks scientific consensus in regard to accurate preprocessing strategies and atlas-based neuroinformatics for images. In addition, it is difficult to acquire high resolution images for mice due to how significantly smaller a mouse brain is compared to that of humans. In this study, we present an Allen Mouse Brain Atlas-based image data analysis pipeline for structural connectivity analysis involving structural region segmentation using mouse brain structural images and diffusion tensor images. Each analysis method enabled the analysis of mouse brain image data using reliable software that has already been verified with human and mouse image data. In addition, the pipeline presented in this study is optimized for users to efficiently process data by organizing functions necessary for mouse tractography among complex analysis processes and various functions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.6
• /
• pp.675-686
• /
• 2021

This study investigated the ground displacement occurring in a slope below a waste-rock dumping site and estimated the likelihood of a disaster due to a landslide. To start with, photogrammetry was conducted by unmanned aerial vehicles (UAVs) to investigate the size and extent of the ground displacement. From April 2019 to July 2020, the average error rate of the five UAV surveys was 0.011-0.034 m, and an elevation change of 2.97 m occurred due to the movement of the soil layer. Only some areas of the slope showedelevation change, and this was believed to be due to thegroundwater generated during rainfall rather than the effect of the waste-rock load at the top. Sensitivity analysis for LS-RAPID simulation was performed, and the simulation results were compared and analyzed by applying a digital elevation model (DEM) and a digital surface model (DSM)as terrain data with 10 m, 5 m, and 4 m grids. When data with high spatial resolution were used, the extent of the sedimentation of landslide material tended to be excessively expanded in the DEM. In contrast, in the result of applying a DSM, which reflects the topography in detail, the diffusion range was not significantly affected even when the spatial resolution was changed, and the sedimentation behavior according to the river shape could be accurately expressed. As a result, it was concluded that applying a DSM rather than a DEM does not significantly expand the sedimentation range, and results that reflect the site situation well can be obtained.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.1
• /
• pp.49-54
• /
• 2022

The copper plating process used to fabricate the submicron damascene pattern of Cu wiring for Si wafer was applied to the plating of a PCB pattern of several tens of microns in size using the same organic additives and current density conditions. In this case, the non-uniformity of the plating thickness inside the pattern was observed. In order to quantitatively analyze the cause, a numerical calculation considering the solution flow and electric field was carried out. The calculation confirmed that the depletion of Cu²⁺ ions in the solution occurred relatively earlier at the bottom corner than the upper part of the pattern due to the plating of the sidewall and the bottom at the corner of the pattern bottom. The diffusion coefficient of Cu²⁺ ions is 2.65 10^-10 m²/s, which means that Cu²⁺ ions move at 16.3 ㎛ per second on average. In the cases of small damascene patterns, the velocity of Cu²⁺ ions is high enough to supply sufficient ions to the inside of the patterns, while sufficient time is required to replenish the exhausted copper ions in the case of a PCB pattern having a size of several tens of microns. Therefore, it is found that the thickness uniformity can be improved by reducing the current density to supply sufficient copper ions to the target area.

• Applied Chemistry for Engineering
• /
• v.33 no.2
• /
• pp.151-158
• /
• 2022

In this paper, parameter characteristics such as pH effect, isotherm, kinetic and thermodynamic parameters and competitive adsorption of dyes including malachite green (MG), direct red 81 (DR 81) and thioflavin S (TS), which have different functional groups, being adsorbed onto activated carbon were investigated. Langmuir, Freundlich and Temkin isotherm models were employed to find the adsorption mechanism. Effectiveness of adsorption treatment of three dyes by activated carbon were confirmed by the Langmuir dimensionless separation factor. The mechanism was found to be a physical adsorption which can be verified through the adsorption heat calculated by Temkin equation. The adsorption kinetics followed the pseudo second order and the rate limiting step was intra-particle diffusion. The positive enthalpy and entropy changes showed an endothermic reaction and increased disorder via adsorption at the S-L interface, respectively. For each dye molecule, negative Gibbs free energy increased with the temperature, which means that the process is spontaneous. In the binary component system, it was found that the same functional groups of the dye could interfere with the mutual adsorption, and different functional groups did not significantly affect the adsorption. In the ternary component system, the adsorption for MG lowered a bit, likely to be disturbed by the other dyes meanwhile DR 81 and TS were to be positively affected by the presence of MG, thus resulting in much higher adsorption.

• Journal of Food Hygiene and Safety
• /
• v.36 no.6
• /
• pp.520-527
• /
• 2021

In this study, toxin gene and antibiotic resistance of food poisoning strains isolated from indoor air in the cafeteria were analyzed to prevent food poisoning. Staphylococcus aureus (16 strains) and Bacillus cereus (37 strains) isolated from indoor air in child care center were tested. The toxin genes of S. aureus and B. cereus were detected by PCR assay. The antimicrobial susceptibility test followed the disc diffusion method described by the Clinical and Laboratory Standard Institute. The seg and sei toxin genes were detected in 11 of 16 S. aureus strains (68.6%). The nheA and nheB toxin genes were detected in 37 B. cereus strains. In this study, a total of 12 toxin gene patterns of B. cereus were found, among which the nheA-nheB-nheC toxin gene was found to be the most frequent pattern. The result of the antimicrobial susceptibility test of S. aureus revealed 93.8% and 87.5% resistance to ampicillin and penicillin antibiotics, but methicillin resistance S. aureus and vancomycin resistance S. aureus were not detected. All 37 B. cereus tested in this study were resistant to ampicillin and penicillin antibiotics. Based on the result of this study, it was judged that regular ventilation and air quality management were necessary to prevent food poisoning caused by S. aureus and B. cereus contaminated in the indoor air of child care centers.

• The Journal of the Korea Contents Association
• /
• v.22 no.4
• /
• pp.28-36
• /
• 2022

This study analyzed 284 K-pop song and dance cover short-form videos recreated by Chinese influencers uploaded on TikTok, to explore which reform factors of image similarity, language similarity, the extent of audience participation leading, the extent of lyrics or subtitles translated into Chinese, PPL disclosure, the length of video and the reputation of influencer affected Chinese TikTok audiences' reactions - number of "Likes," "Comments" and "Shares." The results showed that only the "reputation of influencer" was significantly affected the number of "Likes" which estimated as a relatively passive response, but the other factors affected the number of "Comments" and "Shares" significantly which estimated as more active responses. The more an influencer is perceived as not similar to the singer in terms of image the more comments were posted. And the videos expressed in Korean archived more comments and shares than those lyrics or subtitles translated into Chinese. This study is meaningful in that it confirmed the necessity of influencers in the globe diffusion of K-pop, by specifically analyzing the audience's reactions according to the characteristics of UCCs created by local influencers using short-form video platforms.