• 한국세라믹학회지
• /
• 제54권3호
• /
• pp.222-227
• /
• 2017

Flake-type micro hollow silica was synthesized by precipitation method using an $Mg(OH)_2$ inorganic template and sodium silicate and ammonium sulfate as the silica precursors. We investigated the effects of the silica precursor concentration on the shape, shell thickness, and surface of the hollow silica. When the concentration of the silica precursor was 0.5 M, the hollow silica had a smooth and translucent thin shell, but the shell was broken. On the other hand, the shell thickness of the hollow silica changed in the range of 12 nm to 18 nm with the increase of the precursor concentration from 0.7 M to 1.1 M. Simultaneously, unintended spherical silica satellites were created on the shell surface. The number of satellites and the size rose according to the increased concentration of silica precursor. The reason for the formation of spherical silica satellites is that the $NH_4OH$ nucleus generated in the synthesis of hollow silica acted as another silica reaction site.

• International Journal of Railway
• /
• 제3권2호
• /
• pp.39-45
• /
• 2010

The RF-CBTC (Radio Frequency-Communication Based Train Control) System is a communication system in railroad systems. The communication method of RF-CBTC system is the wireless between the wayside device and on-board device. The wayside device collects its location and speed from each train and transmits the distance from the forwarding train to the speed-limit position to it. The on-board device controlling device controls the speed optimum for the train. In the case of the RF-CBTC system used in Korea, transmission frequency is 2.4 [GHz]. It is the range of ISM(Industrial Scientific and Medical equipment) band and transmission of voice and data is performed by CDMA (Code Division Multiple Access) method. So noises are made in the AWGN (Additive White Gaussian Noise) and fading environment. Currently, the SNR (Signal to Noise Ratio) is about 20 [dB], so due to bit errors made by noises, transmission of reliable information to the train is not easy. Also, in the case that two tracks are put to a single direction, it is needed that two trains transmit reliable voice and data to a wayside device. But, by noises, it is not easy that just a train transmits reliable information. In this paper, we estimated the BER (Bit Error Rate) related to the SNR of voice and data transmission in the environment such as AWGN and fading from the RF-CBTC system using the CDMA method. Also, we supposed the SNR which is required to meet the BER standard for voice and data transmission. By increasing the processing gain that is a ratio of chip transmission to voice and data transmission, we made possible voice and data transmission from maximally two trains to a wayside device, and demonstrated it by using Matlab program.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 춘계학술대회
• /
• pp.220-223
• /
• 2012

현재 일반적으로 사용되는 Time Domain Sampling(아래 TDS) 방식의 SAW Device는 빠른 Data 처리를 할 수 있지만 그만큼의 빠른 sampling 속도를 요구하기 때문에 고속의 AD 컨버터가 필요하다. 이 고속의 AD 컨버터는 고가의 장비로 Device 제작에 부담이 되는 실정이다. 반면에 Frequency Domain Sampling(아래 FDS) 방식으로 구현된 SAW Device는 고속의 sampling을 요구하지 않기 때문에 고가의 고속 AD 컨버터가 필요하지 않다. 이렇게 느린 sampling 속도는 상대적으로 고속의 processing을 요구하게 되는데 이는 저가의 Embedded System만으로도 구현이 가능하기 때문에 가격대비 성능에서 효율이 훨씬 높다고 할 수 있다. 그럼에도 FDS 방식의 SAW sensor를 제작하는 것이 까다롭기 때문에 현재 구현된 FDS 방식의 SAW Device는 매우 드문 실정이다. 본 연구에서는 이 문제를 해결하기 위해 기존의 TDS용 SAW sensor를 그대로 이용한 FDS 방식의 SAW Device에 대해 설계 및 구현한다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 추계학술대회
• /
• pp.312-315
• /
• 2012

현재 일반적으로 사용되는 Time Domain Sampling(아래 TDS) 방식의 SAW Device는 빠른 Data 처리를 할 수 있지만 그만큼의 빠른 sampling 속도를 요구하기 때문에 고속의 AD 컨버터가 필요하다. 이 고속의 AD 컨버터는 고가의 장비로 Device 제작에 부담이 되는 실정이다. 반면에 Frequency Domain Sampling(아래 FDS) 방식으로 구현된 SAW Device는 고속의 sampling을 요구하지 않기 때문에 고가의 고속 AD 컨버터가 필요하지 않다. 이렇게 느린 sampling 속도는 상대적으로 고속의 processing을 요구하게 되는데 이는 저가의 Embedded System만으로도 구현이 가능하기 때문에 가격대비 성능에서 효율이 훨씬 높다고 할 수 있다. 그럼에도 FDS 방식의 SAW sensor를 제작하는 것이 까다롭기 때문에 현재 구현된 FDS 방식의 SAW Device는 매우 드문 실정이다. 본 연구에서는 이 문제를 해결하기 위해 기존의 TDS용 SAW sensor를 그대로 이용한 FDS 방식의 SAW Device에 대해 설계 및 구현한다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제46권5호
• /
• pp.395-399
• /
• 2023

The knee arthritis patients are generally performed standing position radiography. However, patients with pain caused by degenerative diseases or injuries in the knee have difficulty maintaining a standing position. Therefore, this study aims to develop a knee joint standing weight bearing projection assist device to solve these problems when patients undergo knee radiography due to various diseases. The design of the knee joint weight-bearing radiography assist device is carried out with 3D design and drawing production to secure basic data, electric support and frame manufacture. A fixed device for maintaining the patient's knee standing weight-bearing projection, an electric digital height device, a digital protractor, and a safety device were designed. The arm support is made of PVC with a cushion to relieve the impact and make it easier to remove debris. The digital electric device can be moved up and down according to the patient's height, and a remote control is attached. The safety device is made to be adjustable in size by attaching metal hooks on both sides of the frame and to shield the scrotum. A digital protractor was attached to the side frame to set the desired knee angle. When a self-made assist device was used to perform a knee joint standing weight bearing projection, it helped maintain arm support and lower extremities position. In addition, the height could be adjusted using an assist device during standing projections, which helped the patient maintain the position.

• 기본간호학회지
• /
• 제7권3호
• /
• pp.391-400
• /
• 2000

A long-term bed rest results in an inevitable foot drop. Yet preventive device such as a foot board and high-neck tennis shoes, are not widely used. This study was conducted to compare the effects of a pillow-type foot board with that of the band-type device. The band-type device of a resonable price is designed for an effective prevention of foot drop, and the convenience for it use. Among the non-equivalent control group design, foot drop preventive effects, usefulness of the device, as well as its cost effectiveness were examined. The study was carried out for four months from December 1999, and its subject had been patients and nurses of two intensive care units at K medical center in Seoul. According to the study purpose, the data collected were analyzed by $x^2-test$ and t-test. The results are as follow : 1. The ROM of ankle joint is promoted in the experimental group with a band-type device comparing the control group with a pillow type one. Dorsiflexion is particularly increased in the experimental group as compared with the control group, while planterflexion hardly shows any change. 2. The usefulness score of the experimental group nurses using the band-type device (23.97) is higher than that of the control group nurses (18.88). 3. In an aspect of the unit production cost, band-type devices are low-priced compare with pillow-type or other foot board (wooden) or high-neck tennis shoes. In summary, the newly developed band-type device is both useful and preventive for a foot drop. It is also desirable regarding to the production cost and the cost effectiveness. This fact proves that the new anti-foot drop device could be practical both for clinical care and home care. Yet the results were obtained by some subjects, it should be used after a further examination. More effective nursing intervention could be observed throughout general studies, including proper positioning and foot and ankle exercises which are the important variables of the foot drop prevention.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제6권1호
• /
• pp.17-24
• /
• 2017

이동식 저장매체가 널리 보급됨에 따라 중요한 정보가 이동식 저장매체에 보관되는 경우가 많아지고 있다. 따라서 핵심적인 범죄 증거 역시 이동식 저장 매체에 존재할 가능성이 커지고 있으며 압수 수색 현장에서 이동식 저장 매체는 반드시 수집해야 할 대상이 되었다. 이동식 저장매체를 증거물로 획득한 경우 하드웨어 기반의 이미징 장비나 쓰기방지장치를 동반한 포렌식 소프트웨어를 통해 이미징 작업을 진행한다. 하지만 이런 장비의 경우 고가일 뿐만 아니라 현장에서 고장으로 인해 급하게 사용할 수 없는 경우를 배제할 수 없다. 또한 실험을 통해 확인한 결과 보안 USB 혹은 백신 USB의 경우 하드웨어 기반의 이미징 장비나 쓰기방지장치에서 인식을 할 수 없는 경우를 발견하였다. 따라서 본 논문에서는 현재의 이동식 저장매체에 맞는 디지털 증거 수집절차를 제안한다.

• 대한의용생체공학회:의공학회지
• /
• 제34권2호
• /
• pp.69-72
• /
• 2013

The goal of this study is to develop test method for evaluating the drug eluting properties of drug eluting stents (DES). PBS and the detergent solutions, presented by each DES manufacturer, were used for drug release of DES coated with paclitaxel, zotarolimus and everolimus. The drugs which are coating DES were not released by PBS but released by the detergent solutions, finally paclitaxel 83.38%, zotarolimus 103.85% and everolimus 115.78%. It seems that the use of the detergents is necessary in order to release the drugs because those drugs are extremely hydrophobic. In conclusion, using of detergent solutions presented by each manufacturer were suitable for evaluating the drug eluting property of drug eluting stent.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.895-897
• /
• 2008

ZnO films were fabricated using rf-magnetron sputter deposition process with different $N_2$ ambient. N-content in N-doped ZnO films was less than 1%. The wavelength of the highest intensity PL peak of N-doped ZnO was shifted to higher wavelength with increasing $N_2$ flow rate in the deposition ambient. These results indicated that the optical property of ZnO was significantly affected by the defect level created by doping with a very small amount of N.

• 한국IT서비스학회지
• /
• 제4권2호
• /
• pp.71-78
• /
• 2005

The beginning of Web Services was understood as efficient technology for application integration in the internet, thus it was used to integrating the distributed enterprise applications or the e-business applications between partners. But, recently the usage trend of Web Services is largely spreaded out wireless network applications beyond the internet applications. The main reasons are that Web Services is the international standard of W3C, and Web Services is based on XML that is independent of the specific internal implementations such as platform, programming languages, communications networks etc. Currently Major company of Web Services such as MS, IBM, etc. focus on the research about technology for integrating various devices. In this paper, we define and explain technical issues for adapting web services to ubiquitous Environment.