• The Research Journal of the Costume Culture
• /
• v.31 no.2
• /
• pp.228-247
• /
• 2023

In this study, an empirical analysis was conducted on the use of Korean design elements in the Hanbokwave project in 2022 in order to identify the expressed fashion characteristics and define Korean style. A case study was conducted on 98 items of clothing representing 10 Hanbok designer brands, and an analysis card was developed and used that classifies the silhouette of each item in detail. The analysis showed that in addition to the traditional skirt and Jeogori, the four stages of simulakr's image were prevalent in various fashion items such as shirts, blouses, jackets, crop tops, vests, dresses, and pants. In the composition of sleeves, many western clothing methods such as set-in-sleeve use and adjustment, hardcover buttons, and zippers were used to fuse the three-dimensional structure of western clothing and elements of traditional Hanbok to redefine it as postmodernism. It was recognized as a modern fashion, such as the trend of mixing and matching tops and bottoms, not a skirt and Jeogori set, by layering traditional clothes without hesitation or using them as a dress. As for the silhouette of the bottoms, the A-line showed a high frequency, and the prominent shape was identified as a traditional element widely used in modern Hanboks along with the element of wrinkles. This study is thought to be used as practical data for design development for the globalization of K-fashion in the future.

• Journal of the Korean Society for Heat Treatment
• /
• v.8 no.3
• /
• pp.229-235
• /
• 1995

We were studied to the effect of alloying element and retained austenite on a mechnical properties and that used steels were composed three types composition. According to the soaking temperature, a retained austenite was pricipitated in the bainitic ferrite matrix and it was pricipitated to a flake type of about $2{\mu}m$, a mixture of massive and bar type and a flake type of about $1{\mu}m$ size. Through x-ray diffraction analysis, the amount of retained austenite was increased with addition of Si and Ni for equal heat treatment condition and it was best abundanted in the soaking temperature of $855^{\circ}C$. The balance value of strength and elongation were complexly controlled not only a retained austenite formation but also a formation characteristic and shape of the retained austenite and bainite. The balance value of strength and elongation were most satisfactory obtained with "B" and "C" specimens in a firstly heat treated at $855^{\circ}C$ and the best result was that a $2840kg/mm^2.%$ with the heat teratment condition of $855^{\circ}C-400^{\circ}C$ used for "C" specimen.

• Electrical & Electronic Materials
• /
• v.8 no.3
• /
• pp.316-323
• /
• 1995

A vital step in magnetic tape manufacturing is the surface modification of polymer substrate prior to ink application. A critical element for good adhesion of magnetic ink on polymeric substrate is the ability to join ink in cost-effective manner. Corona discharging is one of the effective methods of modifying polymer surface to improve adhesion while maintaining the desirable properties of the film itself. Surface treatment by corona which is exposure of film surface to electron or ion bombardment, rather than mere exposure to active species, like atomic oxygen or ozone, can enhance adhesion by removing contaminant, electret, roughening surface, and/or introducing reactive chemical groups. Reactive neutrals, ions, electron and photons generated during the corona treatment interact simultaneously with polymers to alter surface chemical composition, wettability, and thus film adhesion. However, it is highly recommended that extensive chains scission be avoided because it can lead to side-effect by forming sticky matter, resulting in dropouts. This paper reviews principles of surface preparation of polymer substrate by corona discharging. In addition, the experimental section provides a description of parameter optimization on corona discharging treatment and its side-effect. Experimental results are discussed in terms of surface wetting as determined by contact angle measurements.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.10
• /
• pp.1571-1579
• /
• 1997

The development of a new material which should be continuously use under severe environment of very high temperature has been urgently requested. For the development of such super-heat resistant materials, the main problem is not only to make the superior thermal barrier properties but also to actively release thermal stress. So, a new concept of functionally graded material(FGM) has been proposed to overcome this problem. A composition and microstructure of FGM are varied continuously from place to place in ways designed to provide it with the maximum function of mitigating the induced thermal stress. So, FGM can be applied in the aerospace, the electronic and the medical field, etc.. In this study, thermal stress analysis of sintering PSZ/NiCrAlY graded material was conducted theoretically using a finite-element program. The temperature condition was sintering temperature assuming a cooling-down process up to room temperature. Fracture damage mechanism was anlayzed by the parameters of residual stress. It could be known that FGM provided with the function of mitigating the induced thermal stress.

• Journal of the Korean Society of Industry Convergence
• /
• v.9 no.2
• /
• pp.141-145
• /
• 2006

In case of sense case manufactured by method of outage capacity, sensitivity is declined by outside effect and method of the photo electricity has a problem in transmission. therefore, packing case of composite sense should be developed to improve such a problem about influence of outside environment and its property evaluation has been performed. Mechanical property and result of analysis & test evaluation of Mat'l on aluminum die-casting(ADC 12type) Mat'l developed are as following. Tensile test piece, No. 4 of KS B 0801, has been applied to mechanical property test of Mat'l and It has been tested by method of metal mat'l tensile test(KS B 0802 : 2003). It can be found that physical property to KS(Korea Standard) is excellent. and homogeneous mechanical property appears. Test of Mat'l analysis has been performed by using OE Spectrometer, according to ASTM E 1251 : 1994 regulation. Consequently, good and homogeneous component contents classified by element to standard, except for Fe, have been obtained with coordination of Fe content as below 1.3% from composition standard of Aluminum Die-casting.

• Korean Journal of Remote Sensing
• /
• v.22 no.5
• /
• pp.421-425
• /
• 2006

It can be important framework data to monitor the change of land-use pattern of river boundary in design and management of river. This study analyzed the change of land-use pattern of Gab and Yudeung River using time-series aerial images. To do this, we carried out radiation and geometric correction of image, and estimated land-use changes in inland and floodplain. As the analysis of inland, the ratio of residential, commercial, industrial, educational and public area, that is urbanized element, increases, but that of agricultural area shows a decline on the basis of 1990. Also, Minimum Distance Method, which is a kind of supervised classification method, is applied to extract water-body and sand bar layer in floodplain. As the analysis of land-use, the ratio of level-upped riverside land and water-body increases, but that of sand bar decreases. These time-series land use information can be important decision making data to evaluate the urbanization of river boundary, and especially it gives us goodness in river development project such as the composition of ecological habitat.

• Progress in Medical Physics
• /
• v.32 no.4
• /
• pp.159-164
• /
• 2021

Purpose: We investigated the properties of CLEANBOLUS based on silicone with suitable characteristics for clinical use. Methods: We evaluated the characteristics of CLEANBOLUS and compared the results with the commercial product (Super-Flex bolus). Also, we conducted physical evaluations, including shore hardness, element composition, and elongation break. Transparency was investigated through the measured absorbance within the visible region (400-700 nm). Also, dosimetric characteristics were investigated with surface dose and beam quality. Finally, the volume of unwanted air gap was investigated based on computed tomography images for breast, chin, and nose using Super-Flex bolus and CELANBOLUS. Results: CLEANBOLUS showed excellent physical properties for a low shore hardness (000-35) and elongation break (>1,000%). Additionally, it was shown that CLEANBOLUS is more transparent than Super-Flex bolus. Dosimetric results obtained through measurement and calculation have an electron density similar to water in CLEANBOLUS. Finally, CLEANBOLUS showed that the volume of unwanted air gap between the phantom and each bolus is smaller than Super-Flex bolus for breast, chin, and nose. Conclusions: The physical properties of CLEANBOLUS, including excellent adhesive strength and lower shore hardness, reduce unwanted air gaps and ensure accurate dose distribution. Therefore, it would be an alternative to other boluses, thus improving clinical use efficiency.

• Structural Engineering and Mechanics
• /
• v.89 no.5
• /
• pp.467-477
• /
• 2024

Manufacturing industries, now-a-days, focus mostly on redesigning of the products for reducing cost and lead-time via detailed analysis of its composition and constructional design regarded as the Reverse Engineering (RE) process that involves the acquisition of relevant data of the original product, analysis for its functional use and finally, reproduction of the design for improving the functionality. In the present work, a new model based on optimization at different steps of RE, is proposed to redesign a structural component, which is subjected to severe tensile stress while in service. The component under study is an accessory namely, hitch bracket, attached to the rear axle of a tractor to connect it to the plough. The methodology includes building of a 3D Computer Aided Design (CAD) model from the scanned data of the existing component with the help of 3D scanner. Computer Aided Engineering (CAE) analysis is carried out on the CAD model with existing load conditions by Finite Element Analysis (FEA). Topological optimization is carried out giving rise to a modified/optimized design of the component. It is observed that the performance of the modified component improves significantly with simultaneous weight reduction without affecting its functional use and the manufacturing process setup.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.4
• /
• pp.345-352
• /
• 2005

In up-to-date information anger time it is caused by with business of traffic accident control and analysis and two time it accomplishes a business. National Police Office which controls a traffic accident does not execute an up-to-date technique. And, it is working yet by the hand, There is to traffic accident analysis and the research regarding the analysis against the research which it follows in geography element and composition element and an accident cause is weak. Consequently, effectively establishment and it enforces a traffic safety policy and from the hazard which it evaluates traffic accident data the system and scientific analysis against a traffic accident occurrence cause and a feature in basic must become accomplished. The research which it sees constructs a traffic accident data in GIS base. It is like that, it uses the PDA where is not the collection of data of text form in existing and at real-time it converts store and an accident data rightly in standard traffic accident data form and it will be able to manage. It was related with a space data peculiarity and the research regarding the system development with the geography analysis data about an accident cause under manifesting it accomplished.

• The KIPS Transactions:PartC
• /
• v.13C no.7 s.110
• /
• pp.913-922
• /
• 2006

It used exclusively the radio communication where is the TRS(Trunked Radio Service) at frequency where the person whom it does is specific with hitherto radio communication method differently frequency of the decimal which is allocated to the relay station it talks the at the room which the multiple user uses with commonness. The TRS system the most big feature is the region multiple group and order communication method. The TRS the composition of system is composed of the multi mind group, the each group is composed of the terminal of the users who have the objective which is similar relates in business contents. With above it follows in same multi objective and the connection of the form which is various or group communication accomplishes and quality case, a possibility a or of having many problem point in key distribution for a large scale communication there is it could be exposed to attack of the form which is various. There is a place where it accomplishes the communication which is safe at the TRS from research which it sees it investigates group key distribution method which is an essential element. The method which it sees when it reduces a communication frequency, it stands but is the user, it proposes the efficient group key distribution method it will be able to accomplish.