• Title/Summary/Keyword: IT activity

Search Result 20,336, Processing Time 0.054 seconds

Quality Characteristics of Black Raspberry Wine Fermented with Different Yeasts (효모의 종류를 달리하여 제조한 Black Raspberry 발효주의 품질 특성)

  • Lee, Yoonji;Kim, Jae Cheol;Hwang, Keum Taek;Kim, Dong-Ho;Jung, Chang Min
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.42 no.5
    • /
    • pp.784-791
    • /
    • 2013
  • Four different yeasts (Fermivin (FM), Saf-instant yeast red (SI), Angest wine active dry yeast (AW) and Angest instant yeast high sugar (AI)) were used for the fermentation of black raspberry wine. The amount of reducing sugars in FM (2.7%) and AI (2.8%) were higher than those in SI (2.4%) and AW (2.5%). The amount of glucose (the major free sugar) was higher in AW (2.57 mg/mL) and AI (2.50 mg/mL) than FM (2.03 mg/mL) and SI (1.75 mg/mL). AW (11.95%) had the highest alcohol content, while SI (11.75%) had the lowest. The pH of FM (pH 3.73) was the lowest, and there were no significant differences in total acidity among the samples. The major organic acid in the wines was citric acid (6.71~8.18 mg/mL) and the amount of organic acids depended on the type of yeasts. The amount of malic acid was highest in SI (2.92 mg/mL), and lowest in AI (1.83 mg/mL). The Hunter color test showed that SI was highest in lightness, redness and yellowness, whereas AI was lowest. There were no differences in turbidity between the samples. There were no significant differences in total phenolic contents (TPC) and total anthocyanin contents (TAC). However, the TPC and TAC of black raspberry wines were higher than those in commercial red wines. The antioxidant activities of wines (determined by ABTS and FRAP) increased in the order of FM, AI, AW and SI. It could not be concluded which yeast is adequate for the fermentation of black raspberry wine because any of the tested yeasts showed the best in all the quality characteristics of the wines.

The Evaluation of Physical Environmental Factors in Urban Parks for Healthy City - Focus on Seoul - (건강증진을 위한 도시공원의 물리적 환경요소 평가 - 서울시를 대상으로 -)

  • Chae, Jin-Hae;Kim, Won-Ju
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.48 no.4
    • /
    • pp.29-40
    • /
    • 2020
  • This study quantitatively and qualitatively analyzes the physical environment for health promotion in urban parks by indicators that were selected in consideration of overseas cases and previous studies. To evenly distribute the areas to be evaluated by region, Seodaemun Independence Park, Hongneung Park, Gocheok Park, Sillim Park, Cheongdam Park, Gaepo Park, and Sungin Park were selected among the old neighborhood parks already established in Seoul. The evaluation indicators consist of quantitative indicators (12 factors classified into the three categories of the surrounding environment, the park characteristics, and the park facilities) and qualitative indicators (14 factors classified according to the five categories of accessibility, safety, convenience, activities, and amenities). These indicators were selected after conducting advisory meetings with experts in the field. The physical environment perception factors were evaluated by experts and investigators by field inspections and were rated on a three-point scale (high, medium, low). According to the results of the analysis, first, not only were exercise facilities and trails, but also various factors which support health activities, such as rest areas, leisure spots, and cultural facilities, as well as accessibility, cleanliness, and drinking water facilities are important indicators for health promotion. Second, even if the requirements are met for quantitative factors, several inconveniences hinder the actual implementation or use in the qualitative evaluation. Thus, both quantitative and qualitative evaluations must be simultaneously performed for the proper judging of the physical environment of a park. Third, upon conducting a qualitative evaluation of the physical environmental factors, score differences depended on the evaluated categories in each park. These differences show that indirect indicators, such as accessibility, safety, and facility convenience are insufficiently equipped compared to direct indicators, such as activity, which includes exercise facilities and fitness centers for health promotion. As the utilization rate of parks is increasing due to COVID-19, more efforts should be made to improve park services in the post-corona era. To promote such services, it is necessary to regularly evaluate parks based on both quantitative and qualitative indicators and to contemplate services not only through direct factors but also indirect factors and security measures.

The Making of Local Socio-economic Space and the Role of Local Government, In Case of Taegu and textile industry (지역사회.경제 공간의 형성과 지방정부의 역할, 대구시와 섬유산업의 경우)

  • Park, Kyu-Taeg
    • Journal of the Korean association of regional geographers
    • /
    • v.7 no.3
    • /
    • pp.91-106
    • /
    • 2001
  • Local government takes an active role in the (re)making of local socio-economic space. To support such an argument, the three different actions by the local government of Taegu, urban planning and local industrial districts, the establishment of special educational institutions, and textile festival are analyzed. The division of the city's space into residential, commercial, and industrial area by local government constrained the location of local manufacturing industries. It also forced textile industry to move to the outskirts of Taegu. As the education level in South Korea rose after the late 1970s, the local government of Taegu as well as local industrial capitalists had to do something to acquire a stable supply of labor to local manufacturing industries, particularly textile one. After the late 1970s, the special classes for the education of local workers, especially textile ones were established within vocational high school and company-operated high schools were also built in Taegu. Finally, local government started a program of textile festival in 1985. Through textile festival, local government as well as local textile business people tried to reproduce textile industry as the main economic activity of Taegu.

  • PDF

The Spatial Linkage and Complex Location of Kumi Industrial Complex -The Case of No.1 Industrial Complex- (구미공업단지의 공장입지와 연계 -제1단지의 경우-)

  • Cho, Sung-Ho;Choi, Kum-Hae
    • Journal of the Korean association of regional geographers
    • /
    • v.3 no.1
    • /
    • pp.183-198
    • /
    • 1997
  • This case study was conducted by verification the site characteristics based on the questionnaire and interview obtained from the all factories located at No. 1 developing area in Kumi industrial complex. The site characteristics were presumed from the process of location behavior and spatial linkage. Kumi industrial complex was developed to improve export industry at national levels by providing chief land price and benefiting various tax. Kumi industrial complex which enticed many factories is playing an important role in export industry in Korea. At beginning, the detention of large enterprises promoted the establishment of related small to medium sized factories into the complex. Two distinctive industries. textile and electronic, were reflected by the purpose to establish the complex and industrial characteristics of Taegu city. respectively. In Kumi industrial complex, positive responses on traffic and raw material supply and negative reactions on the environmental impact on social community as well as high labor charge were investigated. Especially the higher labor cost prevented to hire laborers effectively. In the linkages of spatial and raw material, most factories in the complex depended on the availability of out side the Kumi city. For the textile factories, the supply of raw material and parts were relied on Taegu and/or other cities, whereas in electronic factories purchased them mainly from other cities and partly from abroad. Although questionnaire and interview suggested it, most of the parts were supplied by a parts maturing companies on the complex to a few large enterprises. In the marketing linkage, textile factories revealed higher relation-ship with the foreign countries and sewing factories in Korea. On the other hand, electronic factories have strong relation-ships in the marketing linkage to the parts supplying companies in the complex or large-scale resembling companies in other cities. In the textile companies, the right for decision on purchasing raw materials and parts is belonging to the owner whereas mother enterprise usually have the right for the marketing. In the case of the electronic factories, all the purchasing activities are related to the sub-contracting companies. In the service linkage, the Quality of the service created spatial distinction. There was high linkages on inside of Kumi complex for the low grade services such as repairing and installing machines, whereas strong linkages on outside of the complex for the high grade services such as management, law, taxation, new product development. and manufacturing technology. In the linkages of activity on the R&D (research and development), electronic factories do not have sufficiently qualified institutes in the complex. Strong regional linkages in the field of textile and electronic industries revealed limitations of the local industrial complex. In the sub-contracting linkage, high linkage ship within Kumi boundary reflected the characteristics of industrial site in the complex. There, most decisions by the companies centered by the mother enterprise.

  • PDF

Unit Loadings of Heavy Metals by Non-point Sources - Case Study in a Valley Watershed - (비점원에 의한 중금속 원단위 부하량 - 곡간지 유역을 중심으로 -)

  • Kim, Jin-Ho;Han, Kuk-Heon;Lee, Jong-Sik
    • Korean Journal of Environmental Agriculture
    • /
    • v.27 no.1
    • /
    • pp.35-43
    • /
    • 2008
  • The study was carried out to estimate runoff loads of heavy metals in the valley watershed at the middle of South Korea, during farming season. There were no other pollution sources except agricultural activity. From 27 April 2006 to 31 October 2007, water samples were collected using two methods. The first method was regular sampling wherein water samples were taken every two weeks; and the other method was through regular sampling when water were collected during each rainfall event. Results showed that heavy metals were found in the water from the regular samples, and were highest during May and June. It was presumed that this might have been contributed by farming activities. Heavy metal concentration of the irregular samples was lower than regular samples. The correlation coefficient between each heavy metal of the regular samples were as follows: Fe-Al>Cr-Al>Fe-Cr>Mn-Fe. The correlation coefficient of the irregular samples were the following: Fe-Al>Fe-Cu is positive; and Pb-Cu>Ni-Al is negative. Measured pollutant loads of heavy metals in the valley watershed were : 2.047 kg $day^{-1}$ of Al, 0.008 kg $day^{-1}$ of Cd, 0.034 kg $day^{-1}$ of Cr, 0.311 kg $day^{-1}$ of Cu, 0.601 kg $day^{-1}$ of Fe, and 0.282 kg $day^{-1}$ of Zn in 2006; while in 2007, the following were observed: 2.535 kg $day^{-1}$ of Al, 0.026 kg $day^{-1}$ of Cd, 0.055 kg $day^{-1}$ of Cu, 0.727 kg $day^{-1}$ of Fe, and 0.317 kg $day^{-1}$ of Zn. In the analysis of data gathered, the loading rates of effluents from the valley watershed during the rainy season were : 79.8% of Al, 69.1% of Cu, 82.5% of Fe, and 69.1% of Zn in 2006; while 69.9% of Al, 67.5% of Cu, 70.4% of Fe, and 67.5% of Zn in 2007.

Physiological Responses of Green Roof Plants to Drought Stress (건조스트레스에 따른 옥상녹화 식물의 생리적 반응)

  • Park, Seong-Sik;Choi, Jaehyuck;Park, Bong-Ju
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.45 no.2
    • /
    • pp.51-59
    • /
    • 2017
  • This study evaluated the drought tolerance of Liriope platyphylla F.T.Wang & T.Tang, Dendranthema zawadskii var. lucidum (Nakai) J.H.Park, Hosta longipes (Franch. & Sav.) Matsum., Sedum sarmentosum Bunge and Zoysia japonica Steud. for an extensive green roof. In order to assess drought tolerance of green roof plants, several criteria were measured such as volumetric water content, leaf and soil moisture potential, chlorophyll a and b, chlorophyll fluorescence, photosynthesis, stomatal conductance, transpiration rate and antioxidants. The results of the drought tolerance measurement of green roof plants focused on the gradually withering of plants from lack of volumetric water content. D. zawadskii was the first to show an initial wilting point, followed by Z. japonica, H. longipes and L. platyphylla in order while S. sarmentosum showed no withering. It was concluded that H. longipes, L. platyphylla and S. sarmentosum were highly drought tolerant plants able to survive over three weeks. Furthermore, chlorophyll a and b were divided into two types: Type I, which kept regular content from the beginning to the middle of the period and suddenly declined, like H. longipes and Z. japonica; and Type II, which showed low content at the beginning, sharply increased at the middle stage and decreased, like D. zawadskii, L. platyphylla and S. sarmentosum. Volumetric water content and the amount of evapotranspiration consistently declined in all plant species. The analysis of chlorophyll fluorescence results that S. sarmentosum, which had relatively high drought tolerance, was the last to decline, while Z. japonica and S. sarmentosum withered after rapid reduction. At first, photosynthesis, stomatal conductance and transpiration rate showed high activity, but they lowered as the plant body closed stomata owing to the decrease in volumetric water content. Measuring antioxidants showed that when drought stress increased, the amount of antioxidants grew as well. However, when high moisture stress was maintained, this compound was continuously consumed. Therefore, the variation of antioxidants was considered possible for use as one of the indicators of drought tolerance evaluation.

Evaluation of Chloride Diffusion Behavior and Analysis of Probabilistic Service Life in Long Term Aged GGBFS Concrete (장기 재령 GGBFS 콘크리트의 염화물 확산 거동 평가 및 확률론적 염해 내구수명 해석)

  • Yoon, Yong-Sik;Kim, Tae-Hoon;Kwon, Seung-Jun
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.24 no.3
    • /
    • pp.47-56
    • /
    • 2020
  • In this study, three levels of W/B(Water to Binder) ratio (0.37, 0.42, 0.47) and substitution ratio of GGBFS (Ground Granulated Blast Furnace Slag) rate (0 %, 30 %, 50 %) were considered to perform RCPT (Rapid Chloride Diffusion Test) at the 1,095 aged day. Accelerated chloride diffusion coefficient and passed charge of each concrete mixture were assessed according to Tang's method and ASTM C 1202, and improving behaviors of durability performance with increasing aged days are analyzed based on the test results of previous aged days from the preceding study. As the age of concrete increases, the passed charge and diffusion coefficient have been significantly reduced, and especially the concrete specimens containing GGBFS showed a significantly more reduction than OPC(Ordinary Portland Cement) concrete specimen by latent hydraulic activity. In the case of OPC concrete's results of passed charge, at the 1,095 days, two of them were still in the "Moderate" class. So, if only OPC is used as the binder of concrete, the resistance performance for chloride attack is weak. In this study, the time-parameters (m) were derived based on the results of the accelerated chloride diffusion coefficient, and the deterministic and probabilistic analysis for service life were performed by assuming the design variable as a probability function. For probabilistic service life analysis, durability failure probabilities were calculated using Monte Carlo Simulation (MCS) to evaluate service life. The service life of probabilistic method were lower than that of deterministic method, since the target value of PDF (Probability of Durability Failure) was set very low at 10 %. If the target value of PDF suitable for the purpose of using structure can be set and proper variability can be considered for each design variable, it is believed that more economical durability design can be made.

Controlling Effect of Agricultural Organic Materials on Phytophthora Blight and Anthracnose in Red Pepper (고추 역병과 탄저병에 대한 친환경유기농자재의 방제 효과)

  • Park, Se-Jung;Kim, Ga-Hye;Kim, A-Hyeong;Lee, Ho-Taek;Gwon, Hyeon-Wook;Kim, Joo-Hyeng;Lee, Kyeong-Hee;Kim, Heung-Tae
    • Research in Plant Disease
    • /
    • v.18 no.1
    • /
    • pp.1-9
    • /
    • 2012
  • A total of 20 agricultural organic materials including inorganic compounds, plant oils and plant extracts were used in the study for assessing the control efficacy on pepper diseases. Among inorganic compounds, only copper hydroxide showed inhibitory effect on both Phytophthora capsici causing Phytophthora blight and Colletotrichum acutatum causing anthracnose. Phosphorous acid inhibited the growth of P. capsici on PDA, and Sulfur/quicklime had it on that of C. acutatum. Plant essential oil, rosemary oil, and rapeseed oil among plant oils and plant extract of Japanese apricot/ginkgo nut inhibited the mycelial growth of the two pathogens. In the screening using pepper plant seedlings, the control efficacy on Phytophthora blight in 6-leaf stage of seedling was superior to that in 4-leaf stage of seedling. A protective effect on Phytophthora blight was displayed by copper hydroxide, sulfur/quicklime, water soluble calcium, phosphorous acid, plant essential oil, and cloves extract. When C. acutatum was inoculated by the non-wound method, copper hydroxide and rapeseed oil showed excellent protective activities with control values of 91.3% and 82.6%, respectively. However, copper hydroxide did not show any activity, when C. acutatum was inoculated after wounding pepper fruits. All organic materials never showed the curative effect on Phytophthora blight and anthracnose in pepper seedling assay and fruit assay.

Development of Carbonization Technology and Application of Unutilized Wood Wastes(II) - Carbonization and it's properties of wood-based materials - (미이용 목질폐잔재의 탄화 이용개발(II) - 수종의 목질재료 탄화와 탄화물의 특성 -)

  • Kong, Seog-Woo;Kim, Byung-Ro
    • Journal of the Korean Wood Science and Technology
    • /
    • v.28 no.2
    • /
    • pp.57-65
    • /
    • 2000
  • Objective of research is obtain fundamental data of carbonized wood wastes for soil condition, de-ordorization, absorption of water, carrier for microbial activity, and purifying agent for water quality of river. The carbonization technique and the properties of carbonized wood wastes(wood-based materials) were analyzed. Proximate analysis showed the wood-based materials contains 0.37~2.27% ash, 70~74% volatile matter, and 17~20% fixed carbon. As carbonization temperature was increased, the charcoal yield was decreased. However, no difference in charcoal yield was found due to time increase. The specific gravity after the carbonization decreased about 30~40% comparing to green wood. The charcoal had 1.08~4.18% ash, 5.88~13.79% volatile matter, and 80.15~90.94% fixed carbon. The pH of plywood and particleboard(pH 9 at $400^{\circ}C$, pH 10 at $600^{\circ}C$ and $800^{\circ}C$) made charcoals was higher than that of fiberboard. The water-retention capacity was not affected by the carbonization temperature and time. The water-retention capacity within 24h was about 2~2.5 times of sample weight, and the Equilibrium moisture content(EMC) became 2~10% after 24h. EMC of charcoal from the thinned trees were 9.40~11.82%($20^{\circ}C$, RH 90%), 6.87~7.61%($20^{\circ}C$, RH 65%), and 1.69~2.81%($20^{\circ}C$, RH 25%). EMC of charcoal from the wood-based materials under $20^{\circ}C$, relative humidity(RH) 90% was similar to EMC of charcoal from the thinned trees(9~11 %). However, under $20^{\circ}C$, RH 25.65%, EMC of charcoal from the wood-based materials were higher(2~3%) than EMC of charcoal from the thinned trees. Every charcoal from the wood-based materials fulfilled the criteria in JWWA K 113-1947.

  • PDF

Cytotoxicity and Apoptosis of Various Concentrations of Doxorubicin in Methylcholanthrene- induced Rat Fibrosarcoma(MCA) Cells (Methylcholanthrene 유도 섬유육종세포주에서 Doxorubicin 농도에 따른 세포독성과 자멸사의 변화)

  • 정진용;왕영필;나석주
    • Journal of Chest Surgery
    • /
    • v.34 no.6
    • /
    • pp.447-453
    • /
    • 2001
  • Background: Although pulmonary resection is the standard approach for the management of pulmonary metastases from soft tissue sarcoma, most of them are unresectable and chemotherapy remains the only option. The effectiveness of the cytotoxic drugs may be limited by the toxicities that occur before the therapeutic dose is reached. The regional administration of doxorubicin using pulmonary arterial perfusion in a rodent model can produce 10 to 25 times higher concentrations in the lung than systemic administration with minimal systemic toxicities. However, it is unclear whether a high concentration of doxorubicin has beneficial effects for killing cancer cells. Material and Method: We studied this to evaluate the dose-dependent cytotoxic and apoptotic effects of doxorubicin on methylcholanthrene-induced rat fibrosarcoma(MCA) cells. This study examined the cytotoxicity and apoptosis-related gene expressions(Fas, FasL, Bax, caspase 1, caspase 2, caspase 8, Bcl-2, Bcl-xL, Bcl-xS) in MCA cells after 24 hours exposure to various concentrations of doxorubicin such as 1, 5, 10, 50, and 100 $\mu$M. Result: Dose-dependent cytotoxicity was observed after 24 hours exposure to doxorubicin. However, peak apoptosis after 24 hours exposure was observed at 5 $\mu$M of doxorubicin. Above 5 $\mu$M, apoptotic activity was decreased with dose-increment. All mRNA levels of apoptosis-related genes after 24 hours exposure were up-regulated above the control level at 1 $\mu$M of doxorubicin and then decreased by doxorubicin dose-increment except caspase 8, which showed higher levels than the control level at 5 $\mu$M. Apoptosis-related protein levels were highest at 1 $\mu$M of doxorubicin and then decreased by doxorubicin dose-increment. However, Bax and Bcl-xL proteins steadily showed higher levels than the control throughout the different concentrations of doxorubicin. Conclusion: These results suggest that apoptosis is the main cytotoxic mechanism in low concentrations of doxorubicin in MCA cells and apoptosis-related genes, such as Bax, caspase 8, and Bcl-xL, are involved. At high concentrations, doxorubicin still can kill MCA cells, even when apoptosis is inhibited, and have its propriety for achieving much cytotoxicity against MCA cells.

  • PDF