• 한국염색가공학회지
• /
• 제31권4호
• /
• pp.249-257
• /
• 2019

Baker's yeast(Saccharomyces cerevisiae) was used as a biocatalyst for eco-friendly indigo dyeing and the reducing power of yeast according to the alkaline solution type was compared. NaOH solution, lye, and buffer solution were used as alkaline solutions. The reducing power(K/S value, oxidation/reduction potential(ORP), pH) was monitored according to the elapsed time including the initiation of reduction, peak reduction, and the end of reduction. In all alkaline solutions, it was confirmed that yeast can be used reducing agent in indigo reduction dyeing. The pH stability and reducing power of buffer solution was better than that of NaOH alone. Although, pH and ORP stability of the reduction bath in lye were better than that of buffer solution, K/S value in buffer solution was higher compared to lye. The reducing power was different depending on the starting pH of the dye bath, and it was better when starting at pH 10.70 than at pH 11.30. Fastnesses to washing, rubbing, and light were relatively good with above rating 4. There was no significant difference in colorfastness depending on the type of alkaline solutions.

• 한국표면공학회지
• /
• 제50권4호
• /
• pp.231-236
• /
• 2017

The present work addresses how to measure the amount of dissolved aluminum in phosphoric acid, based on volumetric and gravimetric measurements of the precipitates formed by reaction between the $H_3PO_4$ solution containing dissolved aluminum ions and 10 % KF solution. The volume of the precipitates increased with dilution of the dissolved aluminum-containing $H_3PO_4$ solution up to 1/4 dilution above which it decreased with further dilution. The lowered amounts of the precipitates at low dilution less than 1/4 and high dilution more than 1/4 are attributed to high acidity of the solution and decreased amount of dissolved aluminum in the solution, respectively. Volumetric measurement of the amount of precipitates was found not to be very reliable with the experiments, while weight measurement of the precipitates after drying for 80 min at $60^{\circ}C$ appeared to be very reproducible. In the present work, it is suggested that the amount of Al dissolved in 85 % $H_3PO_4$ solution can be calculated by multiplying 50 to the weight of precipitate obtained by reacting 8 ml of 1/4 diluted $H_3PO_4$ solution containing dissolved aluminum ions with 6 ml of 10 % KF solution.

• 한국표면공학회지
• /
• 제43권6호
• /
• pp.297-303
• /
• 2010

The effect of solution acidity and organic additives, polyethylene glycol (PEG), on the trivalent chromium electroplating was systematically investigated in the view point of electroreduction of trivalent chromium ions and solution stability. It was found that solution acidity controlled at pH 2.5 showed the widest current range for bright electrodeposits in the presence of PEG additives, which reduced the local current intensification at high current densities. Through complex interaction between PEG additives and hydrogen ion, that is, solution acidity, electrode potential was moved in the negative direction in the bulk solution, while it shifted in the positive when electric potential was scanned. In conjunction with electrochemical quartz crystal microbalance (EQCM), it was found that PEG additives had a role in promoting the electron transfer to trivalent chromium ion complexes in bulk solution and their adsorption at the electrode surface as well as interfering with hydrogen ion reduction process below pH 2.5. The PEG additives developed the nodular morphology during electroreduction of trivalent chromium ions with the increase of solution acidity and enhanced its current efficiency by maintaining the consumption of complexant, formic acid, at low speed.

• 전기화학회지
• /
• 제2권3호
• /
• pp.117-122
• /
• 1999

본 연구에서는 알칼리 용액에서 알루미늄의 부식속도를 측정하면서, 합금원소, 알칼리도(KOH농도),용액온도, 그리고 용액에 첨가하는 부식 억제제의 종류와 그 농도 등이 미치는 영향에 대해 조사하였다. 알루미늄 제품에 따라서는 순도 $99\%$ 이상인 AA-1050의 부식속도가 가장 낮은 반면에 Mg나 Mn이 포함된 합금은 상대적으로 높게 측정되었다. KOH 수용액에 ZnO를 포화농도로 첨가하면 부식속도가 $50\%$ 이상 억제되는 효과가 나타났지만. ZnAc는 부식 억제제로서 역할하지 못하였다. 알칼리도와 용액온도가 높을수록 ZnO의 부식 억제효과는 상승하였다 부식속도는 KOH농도에 대해 1차 선형 증가함수 그리고 온도 역수에 대해 지수형 감소함수로 나타났다. SEM과 EDS를 사용하여 부식 표면에 부착된 물질의 성분을 분석하였으며, XRD의 기기분석을 통하여 KOH 용액에서의 알루미늄의 부식 생성물이 $Al(OH)_3$임을 확인하였다.

• Computers and Concrete
• /
• 제18권1호
• /
• pp.17-37
• /
• 2016

This paper compares the arc-length and explicit dynamic solution methods for nonlinear finite element analysis of prestressed concrete members subjected to monotonically increasing loads. The investigations have been conducted using an L-shaped, prestressed concrete spandrel beam, selected as a highly nonlinear problem from the literature to give insight into the advantages and disadvantages of these two solution methods. Convergence problems, computational effort, and quality of the results were investigated using the commercial finite element package ABAQUS. The work in this paper demonstrates that a static analysis procedure, based on the arc-length method, provides more accurate results if it is able to converge on the solution. However, it experiences convergence problems depending upon the choice of mesh configuration and the selection of concrete post-cracking response parameters. The explicit dynamic solution procedure appears to be more robust than the arc-length method in the sense that it provides acceptable solutions in cases when the arc-length approach fails, however solution accuracy may be slightly lower and computational effort may be significantly larger. Furthermore, prestressing forces must be introduced into the finite element model in different ways for the explicit dynamic and arc-length solution procedures.

• 한국산학기술학회논문지
• /
• 제17권9호
• /
• pp.45-50
• /
• 2016

본 논문에서는 효율적인 환자관리를 위한 링거액 감지기 및 송수신기를 설계 하고자 한다. 링거액 감지기 및 송수신기는 메인 제어부, 링거액 감지부, 디스플레이 및 경고 발생부, 무선 송수신부, 전원 공급부로 구성된다. 메인 제어부에서는 GC89L591A0-MQ44IP의 CPU를 사용하여 전체 시스템을 제어하고 링거액 감지부는 수광부에 TSL235R-LF 포토다이오드, 투광부에 Water-Clear Type LED를 적용하였다. 또한, 디스플레이 및 경고 발생부는 7-세그먼트와 적색 LED를 적용하였으며 무선 송수신부는 NR-FPCX 모듈을 사용하여 데이터를 송수신하였다. 전원 공급부는 건전지를 사용하며 일반 전원이나 충전식 전원도 사용할 수 있도록 하였다. 따라서, 효율적인 환자관리를 위한 링거액 감지기 및 송수신기 설계에 대한 연구 결과 링거액이 포토다이오드에 의해 감지되었을 때 주파수는 11.95kHz이며, 감지되지 않았을 때는 9.6kHz로 측정되었다. 이때, 링거액의 감지 데이터가 링거액 송신기를 통해 출력되지 않을 때는 "0" 으로, 출력되었을 때는 해당 병실의 호실 정보가 링거액 수신기에 표시됨을 확인 할 수 있었다. 또한, 링거액 감지기의 사용전원은 신호가 감지되지 않을 때에는 Sleep 모드로 전환하여 배터리 절약 모드로 동작하며 링거액 송수신기는 대략 700m이내의 거리에서 무선 송수신이 가능하다.

• Journal of Magnetics
• /
• 제11권2호
• /
• pp.98-102
• /
• 2006

It was examined in this study that magnetic beads, which are assumed to be environmentally functional, could be effective in processing heavy metals that are water pollutants. For the purpose, magnetic beads containing carboxyl groups, which has strong binding force with heavy metals, are mixed with each Cd, Pb, Ni, Cu and Cr(III) solution, then stirred in pH 6. As a results of the process, it was proven that heavy metals bind quickly with magnetic beads through the reaction. In order to analyze heavy metal concentration, magnetic beads bind with heavy metal were collected by external magnetic force and dissolved in acid. The graphite furnace AAS was used to get heavy metal concentration melted in the acid solution. The results showed that heavy metal extractions by magnetic beads were influenced by the type and the concentration of a heavy metal, and over 90% of a heavy metal can be extracted in ppm level save for Cr(III). It was also examined in the study whether heavy metal extraction is influenced when other ions exist in each heavy metal solution. According to experiment, adding other heavy metals to a solution did have little influence on extracting an intended heavy metal. But in case salt or heavy metal chelate was added, Ni extraction changed sensitively although extracting other heavy metals were influenced only when the concentration of an added substance is high. In conclusion, it was shown that magnetic beads could be used to treat wastewater with relatively high heavy metal concentration.

• 한국잠사곤충학회지
• /
• 제43권1호
• /
• pp.41-48
• /
• 2001

The purification, dissolution and powdering of stained waste silk obtained from weaving and dyeing process were studied for the surface modification of textile fabric and plastic materials. The whiteness of stained waste silk could be improved through degumming and bleaching with sodium hydrosulfite. The water-soluble fibroin solution can be obtained by dissoving the degummed waste silk in a boiling solution of 50% calcium chloride for 60 minutes. The salts and heavy metals contained in fibroin solution were removed by electric dialysis, wool fiber filtration and gel filtration chromatography. The fibroin powder was prepared by using a fine grinder after the alkali treatment for weakening the silk fiber. The fine fibroin powder of particle size around 30 ㎛ was obtained with a ultra fine-mill, while it was finer below 10 ㎛ with a ball-mill. The dissolved or powdered silk was applied to the surface of fabric with addition of the binder (a urethane resin). The moisture content of polyester and nylon fabrics treated with the silk solution was improved due to hygroscopic property of silk. The fine fibroin powder mixed with the binder ws coated on the surface of synthetic film by use of the air pressed sprayer. It was revealed that the hygroscopicity as well as the softness of fibroin powder coated film was much improved. Therefore, it is thought that the fine silk fibroin powder is applicable as an coating agent for the surface modification of plastic and synthetic leather.

• 융합보안논문지
• /
• 제5권3호
• /
• pp.1-7
• /
• 2005

오늘날의 네트워크는 여러 위협적인 공격에 취약한 상태에 있다. 특히 인터넷 서비스나 전자상거래와 같은 서비스를 제공하는 기업은 위험에 노출이 되어 있고 공격자의 타겟이 된다. 그리하여 기업들은 각종 보안솔루션을 사용하는 것이 현실적이다. 이것은 우리가 이용하고 있는 학내망에서도 예외일 수는 없음으로 학내망에도 FireWall, IDS, VirusWall VPN 등 여러가지 보안 솔루션들이 존재한다. 관리자들은 이 여러 가지의 보안솔루션들을 관리해야 하는데 그러기에는 효율성이 떨어져 모든 솔루션을 관제 및 통제 할 수 있는 어떠한 관리 시스템이 필요하게 되었다. 본 논문에서 ESM이 관리하는 보안솔루션에 대한 기본적인 내용과 ESM을 사용했을 때의 장단점을 다룬다. 또한 그렇게 구현된 학내망에 ESM을 이용하여 관리자가 학내망을 더욱 효율적이고 체계적으로 관리할 수 있는 방안을 제시한다.

• 한국전기전자재료학회논문지
• /
• 제25권11호
• /
• pp.938-941
• /
• 2012

LED is divided to multichannel in order not to exceed a certain voltage in aspects of electric standard. However, it's not possible to know in accordance with what channel SMPS controls the constant voltage and current. In order to solve this problem, it needs to detect the maximum LED String voltage which is applied to LED control circuit, and it is possible to minimize the voltage drop when a difference of LED string voltage occurs by each channel if LED is controlled by the maximum LED string voltage detected. In addition, it is also possible to maximize the efficiency of LED if change LED voltage by detecting the maximum voltage. Feasibility of this claim was verified through implementation of the circuit.