• Analytical Science and Technology
• /
• v.16 no.4
• /
• pp.292-298
• /
• 2003

In this study, the photooxidation and ozonation of humic acid (HA) in aqueous solution were conducted and the treated HA samples at different reaction time were analyzed using ultrafiltration techniques to evaluate the change of their molecular size distributions with its DOC removal. Molecular size distribution of untreated HA showed 41.5% in higher molecular size fractions (>30,000 daltons) and 15.2% in much smaller molecular size fraction (<500 daltons). As UV irradiation time was increased, it was observed that the degradation of the large molecules of the fraction of >30,000 daltons into much smaller molecules was increased. In UV system, the HA molecules of the fraction of <500 daltons became significantly more and its percentage was increased from 35.3% (UV only irradiation) to 58.9% ($UV/TiO_2$) and 87.8% ($UV/H_2O_2$) in the presence of the photocatalysis. Otherwise, ozonation of HA produced mainly the fraction of medium molecular size ranging from 3,000 to 30,000 daltons with much lower portion (<~7%) in the fraction of <500 daltons. In ozone only system, the fraction of 30,000~10,000 daltons occupied in 41.5% at 60 min of ozonation time. In $O_3/H_2O_2$ system, the fraction of 30,000~10,000 daltons and 10,000~3,000 daltons occupied in 38.9% and 36.2% respectively. Based on these results, we suggested applicable treatment process which could be combined with $UV/H_2O_2$, $UV/TiO_2$ and $O_3$, $O_3/H_2O_2$ system for more effective removal of humic acid in water treatment.

• Korean Journal of Environmental Agriculture
• /
• v.36 no.3
• /
• pp.154-160
• /
• 2017

BACKGROUND:This study was carried out to establish an efficient sample preparation for the simultaneous determination of bisphenols (BPs) in river water samples using gas chromatography-mass spectrometry (GC-MS). Sample preparation was examined with conventional extraction methods, such as solid-phase extraction (SPE) and liquid-liquid extraction (LLE), and their efficiency was compared with validation results, including linearity of calibration curve, method detection limit (MDL), limit of quantification (LOQ), accuracy, and precision. METHODS AND RESULTS:The BPs (bisphenol A, BPA; bisphenol B, BPB; bisphenol C, BPC; bisphenol E, BPE; bisphenol F, BPF; bisphenol S, BPS) were analyzed using GC-MS. The range of MDLs by SPE and LLE methods was $0.0005{\sim}0.0234{\mu}g/L$ and $0.0037{\sim}0.2034{\mu}g/L$, and that of LOQs was $0.0015{\sim}0.0744{\mu}g/L$ and $0.0117{\sim}0.6477{\mu}g/L$, respectively. The calibration curve obtained from standard solution of $0.004{\sim}4.0{\mu}g/L$ (SPE) and $0.016{\sim}16{\mu}g/L$ (LLE) showed good linearity with $r^2$ value of 0.9969 over. Accuracy was 93.2~108% and 97.4~120%, and precision was 1.7~4.6% and 0.7~6.5%, respectively. The values of MDL and LOQ resulted from the SPE method were higher than those from the LLE method, particularly those values of BPA were highest among the BPs. Based on the results, the SPE method was applied to determine the BPs in river water samples. Water samples were collected from mainstream, tributary and sewage wastewater treatment plants (SWTPs) in the Yeongsan river basin. The concentration of BPB, BPC, BPE, BPF and BPS were not detected in all sites, whereas BPA was ranged $0.0095{\sim}0.2583{\mu}g/L$, which was $0.0166{\sim}0.0810{\mu}g/L$ for mainstreams, $0.0095{\sim}0.2583{\mu}g/L$ for tributaries, $0.0352{\sim}0.1217{\mu}g/L$ for SWTPs. CONCLUSION: From these results, the SPE method was very effective for the simultaneous determination of BPs in river water samples using GC-MS. We provided that it is a convenient, reliable and sensitive method enough to monitor and understand the fate of the BPs in aquatic ecosystems.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.1
• /
• pp.143-155
• /
• 2018

The Natural Landscape Rating System was introduced in the amendment of the NATURAL ENVIRONMENT CONSERVATION ACT in 2006. For landscape preservation, the system aims to consider the effects of development projects or plans implemented in a natural landscape on skylines, scenic resources, and view corridors. Currently, a lack of consistency in standards for determining Landscape Control Points (LCP) to assess landscape impact lowers the accuracy and reliability of the assessment results. As the perception of and the impact on a landscape varies, depending on the location of the LCP, it is necessary to establish a reasonable set of criteria to select viewpoints and avoid unreliability in the assessment due to unclear criteria. The intent of this study is to propose an objective and reasonable set of criteria for LCP selection to effectively measure the impact on the landscape from development projects that anticipate a change in the landscape and, ultimately, to suggest basic analysis methods to assess the landscape impact of development projects and to monitor the landscape in the future. Among the development projects affecting natural landscapes, as reported in the statement of the environmental impact assessment, cases of construction of a single building or other small-scale development projects were studied. Four spot development projects were analyzed in depth for their landscape impacts, in order to make recommendations for the LCP selection procedure, which aims to widen the scope of selection according to the direction of viewpoints from the target site. The existing results of analysis based on LCP have limitations because they failed to cover the viewshed of the target buildings when there are topographical changes in the surroundings. As a solution to this problem, a new viewshed analysis method has been proposed, with a focus on the development site and target buildings, rather than viewpoints, as used in past analysis.

• Journal of the Korea Concrete Institute
• /
• v.29 no.4
• /
• pp.415-424
• /
• 2017

The purpose of this study is to investigate the effect of sulfate (${SO_4}^{2-}$) and magnesium ($Mg^{2+}$) ions on sulfate resistance of Alkali-activated materials using Fly ash and Ground granulated blast furnace slag (GGBFS). In this research, 30%, 50% and 100% of GGBFS was replaced by sodium silicate modules ($Ms(SiO_2/Na_2O)$, molar ratio, 1.0, 1.5 and 2.0). In order to investigate the effects of $Mg^{2+}$ and ${SO_4}^{2-}$, compression strength, weight change, lengh expansion of the samples were measured in 10% sodium sulfate ($Na_2SO_4$), 10%, 5% and 2.5% magnesium sulfate ($MgSO_4$), 10% magnesium nitrate ($Mg(NO_3)_2$), 10% [magnesium chloride ($MgCl_2$) + sodium sulfate ($Na_2SO_4$)] and 10% [magnesium nitrate $(Mg(NO_3)_2$ + sodium sulfate ($Na_2SO_4$)] solution, respectively and X-ray diffraction analysis was conducted after each experiment. As a result, when $Mg^{2+}$ and ${SO_4}^{2-}$ coexist, degradation of compressive strength and expansion of the sample were caused by sulfate erosion. It was found that the reaction of $Mg^{2+}$ with Calcium Silicate Hydrate (C-S-H) occurred and $Ca^{2+}$ was produced. Then the Gypsum ($CaSO_4{\cdot}2H_2O$) was formed due to reaction between $Ca^{2+}$ and ${SO_4}^{2-}$, and also Magnesium hydroxide ($Mg(OH)_2$, Brucite) was produced by the reaction between $Mg^{2+}$ and $OH^-$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.388-388
• /
• 2016

Chemical mist deposition (CMD) of poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) was investigated with cavitation frequency f, solvent, flow rate of nitrogen, substrate temperature $T_s$, and substrate dc bias $V_s$ as variables for efficient PEDOT:PSS/crystalline (c-)Si heterojunction solar cells (Fig. 1). The high-speed camera and differential mobility analysis characterizations revealed that average size and flux of PEDOT:PSS mist depend on f, solvent, and $V_s$. The size distribution of mist particles including EG/DI water cosolvent is also shown at three different $V_s$ of 0, 1.5, and 5 kV for a f of 3 MHz (Fig. 2). The size distribution of EG/DI water mist without PEDOT:PSS is also shown at the bottom. A peak maximum shifted from 300-350 to 20-30 nm with a narrow band width of ~150 nm for PEDOT:PSS solution, whose maximum number density increased significantly up to 8000/cc with increasing $V_s$. On the other hand, for EG/water cosolvent mist alone, the peak maximum was observed at a 72.3 nm with a number density of ~700/cc and a band width of ~160 nm and it decreased markedly with increasing $V_s$. These findings were not observed for PEDOT:PSS/EG/DI water mist. In addition, the Mie scattering image of PEDOT:PSS mist under white bias light was not observed at $V_s$ above 5 kV, because the average size of mist became smaller. These results imply that most of solvent is solvated in PEDOT:PSS molecule and/or solvent is vaporized. Thus, higher f and $V_s$ generate preferentially fine mist particle with a narrower band width. Film deposition occurred when $V_s$ was impressed on positive to a c-Si substrate at a Ts of $30-40^{\circ}C$, whereas no deposition of films occurred on negative, implying that negatively charged mist mainly provide the film deposition. The uniform deposition of PEDOT:PSS films occurred on textured c-Si(100) substrate by adjusting $T_s$ and $V_s$. The adhesion of CMD PEDOT:PSS to c-Si enhanced by $V_s$ conspicuously compared to that of spin-coated film. The CMD PEDOT:PSS/c-Si solar cell devices on textured c-Si(100) exhibited a ${\eta}$ of 11.0% with the better uniformity of the solar cell parameters. Furthermore, ${\eta}$ increased to 12.5% with a $J_{sc}$ of $35.6mA/cm^2$, a $V_{oc}$ of 0.53 V, and a FF of 0.67 with an antireflection (AR) coating layer of 20-nm-thick CMD molybdenum oxide $MoO_x$ (n= 2.1) using negatively charged mist of 0.1 wt% 12 Molybdo (VI) phosphoric acid n-Hydrate) $H_3(PMo_{12}O_40){\cdot}nH_2O$ in methanol. CMD. These findings suggest that the CMD with negatively charged mist has a great potential for the uniform deposition of organic and inorganic on textured c-Si substrate by adjusting $T_s$ and $V_s$.

• Korean Journal of Plant Resources
• /
• v.30 no.2
• /
• pp.152-159
• /
• 2017

The purpose of this study was to obtain basic data for using Aronia as a functional food material. The composition of anthocyanin was characterized and quantitated by LC-MS/MS, HPLC, and UV-VIS spectrophotometer techniques, respectively. The anthocyanin content was analyzed by temperature, time, pH, and the addition of citric acid. The UV-VIS spectrophotometer used for analysis of anthocyanin is less accurate than the LC-MS/MS method used in recent years. In the past, cyanidin-3-Glucoside was reported to be a major anthocyanin that contains Aronia. However, LC-MS/MS analysis in this study confirmed cyanidin-3-galactoside to be the major compound. The anthocyanin content of the Aronia powder began to decrease sharply at a temperature of $65^{\circ}C$ or higher when heated for 24 hours. In an aqueous solution of Aronia, the anthocyanin content was reduced by 50% at $65^{\circ}C$ for 10 hours and decreased by 85% at $85^{\circ}C$ within 10 hours. Above pH 8, the anthocyanin content was reduced by more than 50%. The results of this study will provide useful information to maintain anthocyanin content in the manufacturing process of Aronia. It could also be used to ensure the stability of anthocyanins in similar species of berries.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.6
• /
• pp.263-271
• /
• 2015

Commercial AR(Alkali Resistant)-glass fiber has a good chemical resistant property, but also has a problem of difficulty in fiberizing process because of high viscosity in melted glass compare with E-glass fiber which is the most widely used for reinforced fiber of composite materials. In this study, we fabricated AR-glass fiber with low zirconia contents compare with commercial AR-glass fiber relatively, and measured properties against E-glass fiber. We obtained transparent clear glass with zirconia contents of 0.5~16 wt% by melting at $1600^{\circ}C$ for 2 hours. These AR-glass samples had high visible transmittance of 89~90 %, softening temperature of $703{\sim}887^{\circ}C$. And softening temperatures of them were increased according to the increasing zirconia contents. Compare with E-glass, AR-glass contains 4 wt% zirconia has different value of $-94^{\circ}C$ in softening temperature, $+68^{\circ}C$ at Log3 temperature and $-13^{\circ}C$ at Log5 temperature in viscosity. We could verify good alkali resistant property of the AR-glass fiber with SEM after dipping in alkali solution for 48~72 hours, and also high tensile strength, 1.7 times compare with E-glass fiber at 48 hours and 2.2 times at 72 hours. We conclude that this AR-glass fiber can be widely used as general alkali resistant glass fiber because of easy manufacturing condition and good properties even though it has low zirconia contents.

• Radiation Oncology Journal
• /
• v.19 no.2
• /
• pp.163-170
• /
• 2001

Purpose : The measurement of radiation survival using a clonogenic assay, the established standard, can be difficult and time consuming. In this study, We have used the MTT assay, based on the reduction of a tetrazolium salt to a purple formazan precipitate by living cells, as a substitution for clonogenic assay and have examined the optimal condition for performing this assay in determination of radiation sensitivity. Materials and Methods : Four human cancer cell lines - PCI-1, SNU-1066, NCI-H630 and RKO cells have been used. For each cell line, a clonogenic assay and a MTT assay using Premix WST-1 solution, which is one of the tetrazolium salts and does not require washing or solubilization of the precipitate were carried out after irradiation of 0, 2, 4, 6, 8, 10 Gy. For clonogenic assay, cells in $25\;cm^2$ flasks were irradiated after overnight incubation and the resultant colonies containing more than 50 cells were scored after culturing the cells for $10\~14$ days. For MTT assay, the relationship between absorbance and cell number, optimal seeding cell number, and optimal timing of assay was determined. Then, MTT assay was performed when the irradiated cells had regained exponential growth or when the non-irradiated cells had undergone four or more doubling times. Results : There was minimal variation in the values gained from these two methods with the standard deviation generally less than $5\%$, and there were no statistically significant differences between two methods according to t-test in low radiation dose (below 6 Gy). The regression analyses showed high linear correlation with the $R^2$ value of $0.975\~0.992$ between data from the two different methods. The optimal cell numbers for MTT assay were found to be dependent on plating efficiency of used cell line. Less than 300 cells/well were appropriate for cells with high plating efficiency (more than $30\%$). For cells with low plating efficiency (less than $30\%$), 500 cells/well or more were appropriate for assay. The optimal time for MTT assay was after 6 doubling times for the results compatible with those of clonogenic assay, at least after 4 doubling times was required for valid results. In consideration of practical limits of assay (12 days, in this study) cells with doubling time more than 3 days were inappropriate for application. Conclusion : In conclusion, it is found that MTT assay can successfully replace clonogenic assay of tested cancer cell lines after irradiation only if MTT assay was undertaken with optimal assay conditions that included plating efficiency of each cell line and doubling time at least.

• The Korean Journal of Pharmacology
• /
• v.25 no.1
• /
• pp.53-58
• /
• 1989

For several years, we investigated the pharmacological action of several substances isolated from Buxus microphylla var koreana Nakai, which had been used as folk remedies of malaria and venereal disease. Cyclobuxine $D(C_{25}H_{42}ON_2)$, a steroidal alkaloid, exerted an antiinflammatory action, hypotensive and bradycardic effects in rats. In the present study, we isolated alkaloid from the acetone-insoluble fraction of the strong bases of this plants. This alkaloid $(C_{25}H_{38}ON_2)$ was identified as a steroidal alkaloid contained a cyclopropane ring by physical and chemical methods. It is a derivative of cyclobuxine D and named cyclobuxine E. We examined the effect of cyclobuxine E on the contractile response induced by acetylcholine and two distinct types of potassium-activated calcium channels in an intestinal smooth muscle of the rat. Cyclobuxine E inhibited significantly the Ach-induced contraction. The isolated longitudinal muscle from the rat duodenum was immersed calcium-depleted potassium depolarizing solution. Ten minutes after, 1.8 mM $CaCl_2$ was added to muscle bath and elicited a biphasic increase in muscle tension. Cyclobuxine E produced an appreciable inhibition of both components of the mechanical response. In addition, Cyclobuxine E introduced at a point when the tonic response had reached its maximum level, caused the muscle to exhibit a rapid loss of tension. Based on these experimental results, we proposed the possibility that the inhibitory action of cyclobuxine E on the isolated rat duodenum may be due to inhibiting the transmembrane fluxes of calcium ion in potassium-activated calcium channels.

• The Korean Journal of Pharmacology
• /
• v.16 no.2 s.27
• /
• pp.45-53
• /
• 1980

Lipid peroxidation in vitro has been identified as a basic deteriorative reaction in cellular mechanism of aging processes, such as air pollution oxidant damage to cell and to the lung, chlorinated hydrocarbon hepatotoxicity. Many experimental evidences were reported by several investigators that lipid peroxidation could be one of the principle causes for the hepatotoxicity produced by $CCl_4$. It is now reasonably established that $CCl_4$ is activated to a free radical in vivo, that lipid peroxidation occurs very quickly in microsomes prepared from damaged livers, that the peroxidation is associated with loss of enzyme activity of microsomes, and that various antioxidants can protect animals against the hepatotoxic effect of $CCl_4$. Recent studies have drawn attention to some other feature of microsomal lipid peroxidation. Incubation of liver microsomes in the presence of NADPH has led to a loss of cytochrome $P_{450}$. However, the presence of an antioxidant prevented lipid peroxidation and preserved cytochrome $P_{450}$. Decrease of cytochrome $P_{450}$ in microsomes under in vitro incubation can be enhanced by $CCl_4 and these changes were parallel to a loss of microsomal polyunsaturated fatty acid and formation of malonaldehyde. The primary purpose of this experiment was to study the effect of riboflavin tetrabutylate on lipid peroxidation, specially, the relationship between lipid peroxidation and drug metabolizing enzyme system which is located in smooth endoplasmic recticulum as well as the effect of ritoflavin tetrabutylate on drug metabolizing enzyme system of animal treated with $CCl_4$. Albino rats were used for experimental animal. In order to induce drug metabolizing enzyme system, phenobarbital was injected intraperitoneally. $CCl_$ and riboflavin tetrabutylate were given intraperitoneally as solution in olive oil. Microsomal fraction was isolated from liver of animals and TBA value as well as the activity of drug metabolizing enzyme were measured in the microsomal fractions. The results are summerized as following. 1) The secobarbital induced sleeping time of $CCl_4$ treated rat was about 2 times longer than that of the control group. However, the pretreatment with riboflavin tetrabutylate inhibited completely the lengthened sleeping time due to $CCl_4$ treatment. Furthermore TBA value was significantly increased in $CCl_4$ treated rat in comparison to control group tut the increase of TBA value was prevented by the pretreatment with riboflavin tetrabutylate. On the other hand, the activity of hepatic drug metabolizing enzyme was decreased in $CCl_4$ group, however, the pretreatment with riboflavin tetrabutylate also prevented the decrease of the enzyme activity caused by $CCl_4$. 2) The effect of riboflavin tetrabutylate on TBA value and the activity of drug metabolizing enzyme in vitro was similar to in vivo results. Incubation of liver microsome from rat in the presence of $CCl_4$, $Fe^{++}$, or ascorbic acid has led to the marked increase of TBA value, however, the addition of riboflavin tetrabutylate in incubation mixture prevented significantly the increase of TBA value, suggesting the inhibition of lipid peroxidation. In accordance with TBA value, the activity of drug metabolizing enzyme was inhibited in the presence of $CCl_4$, $Fe^{++}$, ascorbic acid but the addition of riboflavin tetrabutylate protected the loss of the enzyme activity in microsome under in vitro incubation.