• Fashion & Textile Research Journal
• /
• v.20 no.2
• /
• pp.202-209
• /
• 2018

This study examined thermo-physiological responses according to the design change of construction site working clothes (control (C) working clothes; prototype (P) working clothes). We measured rectal temperature, skin temperature, micro-climate within the clothes and sweat rate. In the evaluation of physiological functionality, based on pattern improvement in working clothes, P working clothes showed significantly lower rectal temperatures, trunk and thigh skin temperatures than C working clothes. It is preferable that rectal temperature should be kept low during work that is not favorable to an increase in body temperature. P working clothes were more physiologically functional than C working clothes. In addition, P working clothes showed significantly lower temperatures in the trunk and thigh parts in a micro climate temperature. We could explain that the side seam zipper on the pants and the gusset on armpit parts create an air permeability effect of lowering the temperature of micro-climate. Aggressive ventilation through the slit of the garment is an important factor for the restoration of the physiological function of the worker at rest between work. Sweat rate showed a higher level in C working clothes than P working clothes. When working in a hot environment, workwear needs to be designed so that the worker is not exposed to thermal stress. Therefore, it was evaluated that the P work clothes used in this study alleviated the physiological burdens of heat.

• Journal of Environmental Health Sciences
• /
• v.3 no.1
• /
• pp.27-44
• /
• 1976

This study was carried out to evaluate the harmful factors in working environments and to investigate the labor productivity after improvement of environments, surveying 93 industrial establishments of 10 industries located in Youngdeungpo industrial area in Seoul. The results obtained were as follows: 1) The highest noise level of 125dB(A) was indicated at the rolling process of transport equipment manufacturing industry. 2) The best illumination level was shown in precise machinery industry and the worst was indicated in rubber products, metallic products and transport equipment manufacturing industries. 3) Thermal conditions were above threshold limit value (TLV) at more than two processes of all industries except printing industry. 4) The highest dust concentration was determined in textile and wearing manufacturing industry. 5) Organic solvents were detected at 52 processes in 93 industrial establishments and 33 processes of them showed higher than TLV. The results about harmful chemicals were as follows: a) sulfur dioxide ($SO_2$)was determined higher than TLV on welding process of metallic product manufacturing industry and heat treatment process of transport equipment manufacturing industry. b) Carbon monoxide (CO) concentration was 700ppm at heat treatment process of transport equipment manufacturing industry, indicating 14 times of TLV. c) vinylchloride concentration in the air of PVC raw material mixing process and PVC preparation process of chemical product manufacturing industry was determined higher than TLV. d) Hydrochloride (HCl) concentration in the air of wire expanding process of transport equipment manufacturing industry was determined higher than TLV. 7) Higher values of lead concentration than TLV were determined at lead welding metallic product manufacturing industry and type planting process of process of printing industry, $1.8mg/m^3$ and $0.3mg/m^3$ respectively. 9) 22, 968 of 52, 855 workers (i.e. 43.5%) in 93 industries were exposed to various harmful agents. 10) It was found that the improvement of illumination in electric apparatus manufacturing industry (from 20~40 lux to 420 lux) resulted in an increase in productivity of 6.5% per capita and a decrease in faulty products of 19%. 11) Improvement of environments using local exhaust ventilation system resulted in a decrease of harmful substances lower than TLV and an increase in productivity of 11.4%. 12) Improvement of shovelling tools based on ergonomics resulted in a reduction in energy expenditure of 25.3% and an increase in productivity of 32.2% per capita.

• Microbiology and Biotechnology Letters
• /
• v.47 no.2
• /
• pp.259-268
• /
• 2019

In this study, the extracellular metalloprotease from Serratia marcescens PPB-26 was purified to homogeneity via ethanol fractionation and DEAE-cellulose column chromatography. Thus, a 3.8-fold purification was achieved with a 20% yield and specific activity of 76.2 U/mg. The purified protease was a 50-kDa monomer whose optimum pH and temperature for activity were 7.5 and $30^{\circ}C$ respectively; however, it was found to remain active in the 5-9 pH range and up to $40^{\circ}C$ for 6 h. The protease had a half-life of 15 days at $4^{\circ}C$, an optimum reaction time of 10 min, and an optimum substrate (casein) concentration of 0.25%. Furthermore, the Michaelis constant ($K_m$) and reaction velocity ($V_{max}$) of the protease were calculated to be 0.28% and $111.11{\mu}moles/(min{\cdot}mg)^{-1}$, respectively. The protease was stable when subjected to metal ions (2 mM), showing increased activity with most (especially $CoCl_2$ and $MgSO_4$ (30.54% increase)). It was also stable when exposed to oxidizing agents, bleaching agents, and detergents (5% v/v for 60 min). It retained 93% of its activity in non-ionic detergents (Tween-20, Tween-80, and Triton X-100). Moreover, wash performance analysis in commercial detergents (Ariel and Tide) showed that not only was the protease capable of protein stain removal, but also reduced cleaning time by 80% when added to detergents. Thus, the Serratia marcescens PPB-26 metalloprotease appears to be a promising new candidate as a laundry additive in the detergent industry.

• Journal of the Korean Vacuum Society
• /
• v.17 no.4
• /
• pp.278-291
• /
• 2008

For the semiconductor manufacturing processes, so many vacuum systems are needed with large power consumption for vacuum pumps. Semiconductor device manufacturing makers are concerned about the power consumption and have to address this because it is related with the environmental issues. So many solutions including the design and the control of them by vacuum pump manufacturers to reduce the power consumption of vacuum pump are proposed. However, how to use vacuum pumps by users and the conditions for vacuum pump to be used are also very important to reduce the power consumption. In this article, how to reduce the power consumption of vacuum pumps is explained briefly and what the impact of semiconductor technology trend on the power consumption is considered very briefly.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.4
• /
• pp.163-172
• /
• 2008

This study has provided the answer which construction companies to make complete competitive factors for sustainable growth in construction industry with to 21C environment changes. So the purpose of study is to provide a guideline for establishing the strategy of existence and growth. In order to carry out this purpose of study, above all after has been reviewed Quality Management by considering the characteristics of construction companies, TQM(Total Quality Management) component and business performance, the study has been made a close inquiry in causal relationship between TQM component(leadership, education.training, participation) and business performance(quality) in construction industry. The result of the study can be summarized as follows: First, a test was conducted to whether TQM component(participation) has a significantly positive effect on business performance(quality). Second, it was found that there was a positive casual relationship between each of the TQM factors and business performance(quality). TQM factors had great influences on the business performance of construction companies. So construction companies needed to make continuous efforts to enhance the business performance through TQM approach.

• Journal of Radiation Industry
• /
• v.9 no.2
• /
• pp.63-68
• /
• 2015

Lyophilized DOTMP kits were prepared using DOTMP, ammonium acetate, and ascorbic acid. The $^{68}Ga$-DOTMP was prepared by incubating the kit dissolved in 0.5 ml of concentrated $^{68}Ga$ using NaCl method and 0.5 ml of DDW, at $100^{\circ}C$ for 7 min. The labeling yield was evaluated by two solvent systems of TLC. 1 MBq of concentrated $^{68}Ga$ was labeled with $0.8{\mu}g$ of DOTMP by high radiolabeling yield (>98%), which was determined by two TLC methods. The composition of the prepared freeze-dried vial is $400{\mu}g$ of DOTMP, 19.27 mg of ammonium acetate and 17.62 mg of ascorbic acid. ~555 MBq of $^{68}Ga$-DOTMP was prepared with excellent radiochemical purity (>98%) and it was stable for 4 hr at room temperature. In conclusion, Freeze-dried DOTMP kits for the convenient preparation of $^{68}Ga$-DOTMP have been developed. Availability of this kit is expected to stimulate the widespread use of $^{68}Ga$-DOTMP in the fields of nuclear medicine.

• Journal of Radiation Industry
• /
• v.7 no.2_3
• /
• pp.127-134
• /
• 2013

Bombesin receptors are overexpressed in many kinds of human tumors. In particular, the gastrin releasing peptide receptor (GRPR) which is also called bombesin receptor subtype 2, has been identified in prostate cancer. In the present study, we developed a bombesin antagonist-based $^{177}Lu$-labeled peptide, $^{177}Lu$-DOTA-$Ala(SO_3H)$-Aminooctanoyl-Gln-Trp-Ala-Val-N methyl Gly-His-Statine-Leu-$NH_2$ (DOTA-sBBNA). DOTA-sBBNA was prepared using a solid phase synthesis method. It was labeled with $^{177}Lu$ by a high radiolabeling yield (>98%), and its Log P value was -2.05. The radiolabeled peptide was highly stable in serum incubation at $37^{\circ}C$ for 48 hr. A competitive displacement of $^{125}I-[Tyr^4]$-Bombesin on the PC-3 human prostate carcinoma cells revealed that the $IC_{50}$ value of the peptide was 6.76 nM indicating a highly nanomolar binding affinity for GRPR. These results suggest that $^{177}Lu$-DOTA-sBBNA can be a potential candidate for targeting prostate cancer, and further studies to evaluate its biological characteristics are needed.

• Journal of Radiation Industry
• /
• v.7 no.2_3
• /
• pp.191-200
• /
• 2013

In this study, a novel bombesin (BBN) analogues, DOTA-Ala($SO_3H$)-4 aminobenzoyl-Gln-Trp-Ala-Val-Gly-His-Leu-Met-$NH_2$ (DOTA-sBBN) and DOTA-Lys(glucose)-4 aminobenzoyl-Gln-Trp-Ala-Val-Gly-His-Leu-Met-$NH_2$ (DOTA-gluBBN), were synthesized and radiolabeled, and their binding affinities were evaluated. Peptides were prepared by a solid phase synthesis method and their purities were over 98%. DOTA is the chelating agent for $^{177}Lu$-labeling, and the DOTA-conjugated peptides were radiolabeled with $^{177}Lu$ by a high radiolabeling yield (>98%). The Log P values of DOTA-sBBN and DOTA-gluBBN were -2.20 and -2.79, respectively. 50.41% of $^{177}Lu$-DOTA-sBBN and 72.97% of $^{177}Lu$-DOTA-gluBBN were left undegraded by the serum incubation at $37^{\circ}C$ for 48 hr. A competitive displacement of $^{125}I-[Tyr^4]$-BBN on the PC-3 human prostate carcinoma cells revealed that 50% inhibitory concentration ($IC_{50}$) were 1.46 nM of DOTA-sBBN and 4.67 nM of DOTA-gluBBN indicating a highly nanomolar binding affinity for GRPR. Therefore, it is concluded that $^{177}Lu$-DOTA-sBBN and $^{177}Lu$-DOTA-gluBBN can be potential candidates as a targeting modality for the Gastrin-releasing peptide receptor (GRPR)-over-expressing tumors, and further studies to evaluate their biological and pharmacological characteristics are needed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.605-608
• /
• 2001

Molybdenum disilicide is widely used for manufacturing high-temperature heating elements owing to its low electrical resistivity, good thermal conductivity, and ability to withstand oxidation at high temperatures. MoSi$_2$heating elements with 4-5wt% of montmorillonite type bentonite as plasticzer and a small amount of Si$_3$N$_4$, ThO$_2$, and B as additives was manufactured. Extruded rods of 3.7mmø and 6.7mmø diameter and 400mm long were fabricated using a vacuum extruder, which were then sinrered for 4-5 hrs. at the max. temperrature of 140$0^{\circ}C$. After 10 minute's oxidation treatment, the diameter of the rod is reduced. The heating elements thus prepared was stable at 1$700^{\circ}C$ and the physical properties such as specific electrical resistivity, hardness, apparent densisty, thermal expansion coefficient, and bending strength were almost identical with thoes of commercial heating elements. In this study we have tried to gain the practical knowledge of manufacturing MoSi$_2$heating elements so that it may be utilized later in a research of pilot scale and eventually be transferred to industry.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.907-910
• /
• 1997

With increasing the needs for micro and precision parts, micro machining technology has been studied to fabricate a small part with high density such as electronics, optics, communications, and medicine industry more than before. But there are many problems to be solved requiring a high-level technology. So this research presents the new method to fabricate a small part through applying chemical mechanical micro machining (C3M) for the Al wafer. Al(thickness I ,u m) was sputtered on the Si substrate. Al is widely used as a lightweight material. However form defect such as burr has a bad effect on products. To improve machinability of ductile material, oxide layer was formed on the surface of AI wafcr before grooving by chemical reaction with HN03(10wt%). And then workpieces were machined to compare conventional micro-machining process with newly suggested method at different machining condition such as load and feed rate. To evaluate whether or not the machinability was improved by the effect of chemical condition, such as the size, the width of grooves 'and burr generation were measured. Finally, it is confirmed that C3M is one of the feasible tools for micro machining with the aid of effect of the chemical reaction.