• Journal of the Korea Institute of Military Science and Technology
• /
• v.25 no.4
• /
• pp.339-346
• /
• 2022

The importance of stealth technology is increasing in modern warfare, and Radar Cross Section(RCS) is widely used as an indicator of stealth technology. It is useful to measure RCS using an image-based near-field to far-field transformation algorithm in short-range monostatic conditions. However, the near-field measurement system requires a longer measurement time compared to other methods. In this work, it is proposed to reduce the measured data using an interpolation method in azimuth angular domain. The calculated far-field RCS values according to the sampling rate is shown, and the performance of the algorithm applied with interpolation in the angular domain is presented. It is shown that measurement samples can be reduced several times by using the redundancy in the angular domain while producing results similar to the conventional method.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.4
• /
• pp.225-236
• /
• 2014

Productivity of public organizations was far older due to issue more difficult to measure than private organizations. Unlike the private sector, the public sector is a diverse and sometimes conflicting objectives (efficiency, effectiveness, equity, democracy, etc.) exist, it is difficult to measure productivity in a single index. Many departments of government is intricately interrelated and sometimes produced by the joint efforts, it is difficult to allocate performance, incentives and accountability to among departments. And there is the difficulty of collecting data on the productivity indicators of public organizations. Despite these difficulties, we developed a productivity index system and measuring method to systematically introduce the concept of productivity in the local administration. In this paper, the productivity and the productivity index measurement practices of local governments conducted annually from 2011 on was deep into research. First, the report found examples of the governments of the developed countries, productivity measurement, then the way MOPAS(Ministry of Public Administration and Security) measure productivity index of local governments, success factors, the implications were in-depth analysis. Finally, in order to enhance productivity and competitiveness municipalities studied ways to take advantage of the productivity index.

• Korean Business Review
• /
• v.20 no.2
• /
• pp.119-133
• /
• 2007

The present study purposed to examine whether BSC, a management renovation method, is as effective in university hospitals, which are non-profit institutions, as it is in profit-making corporations. In order to determine causal relations among the BSC performance measurement indexes, we analyzed a case of university hospital using a structural equation model. The results of analyzing the causal relations among the BSC performance measurement indexes were all statistically significant, and therefore the research hypotheses were all accepted. Future research needs to study causal relations among the BSC performance measurement indexes from the viewpoint of the learning of financial data, growth, internal processes, and customers.

• Proceedings of the Technology Innovation Conference
• /
• 1999.12a
• /
• pp.159-177
• /
• 1999

Many companies still struggle with the issue of research and development(R&D) performance measurement, in particular, the nonfinancial performance measurement of R&D with coming of knowledge-based society, Of course, we would not deny the fact that financial measures play the central role in assessing the overall performance of R&D, The aim of this paper is to provide the new model to evaluate the quantitative value of technology (nonfinancial benefits). This new model is based on the technology stock(technology level) acquired in R&D process, That is, we take it for granted that the acquired technology below a certain level(<70% compare to the advanced country) can not be utilized in developing the new products or in proving the manufacturing processes, The evaluation model we create can explains the quantitative relation between the technology stock and the market value considering R&D expenditure to acquire the technology above certain level(>70%) and cost to prevent the technology obsolescence. The value of non-destructive testing technology, which is one of the electric Power technology, is measured quantitatively using our new model as a case study, We also discussed briefly the possibility of capitalization of the measured technology value.

• Journal of Korean Society for Quality Management
• /
• v.27 no.4
• /
• pp.20-41
• /
• 1999

This study addresses the development of a quality measurement of information systems integration(SI) service. Several dimensions which affect on quality of systems integration service have been identified and tested. Also, a measurement tool(questionnaire) of the factors has been developed. To achieve above purpose, extensive literature review and in-depth interview with several SI managers and customers were used. We suggested the analysis framework including performance variables such as quality, customer satisfaction, intention of renewal contract, and contribution to better customer's information system and the quality factors as well. To verify the research framework, collected data from the survey was analyzed statistically. The data from 73 respondents was used for analysis. Consequently, we identified eight factors and developed a 41-item instrument with Likert 5 points to measure the quality of SI service. It was proved that the 41-item instrument suggested in this study was very useful to measure the performance of SI service such as quality and customer satisfaction. Also it was shown that the instrument measured intention of renewal contract and contribution of customer's information system well.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2167-2169
• /
• 2004

The main concern for a displacement measurement is the performance of a sensor such as speed, resolution, accuracy and so on. The mainly used sensors are a linear CCD(charge coupled device) and a PSD(position sensitive detection) as a non-contact type. The output value of a linear CCD is so sensitive to a temperature change that it needs a cooling device. Additionally, because of its structural problem, there are some limits in resolution and speed, and it needs a complex image processing algorithm. Also, PSD has some disadvantages like sensitivity to environmental lights and nonlinearities. Like this, a linear CCD and PSD have their own characteristics and if we know them well, we can choose the one of the two sensors properly in some applications according to purposes. In this paper, I performed which one is superior to the other among the two sensors in terms of accuracy, resolution, measurement speed, signal to noise ratio.

• 유체기계공업학회:학술대회논문집
• /
• 2005.12a
• /
• pp.318-323
• /
• 2005

To evaluate the accurate performance of turbomachinery, it is important to measure the unsteady flow phenomena downstream of the rotor blade. This paper presents the development of the fast-response total pressure probe for the measurement of the total pressure field at the exit of rotor and the result of measurement in a 1-stage axial turbine. The fast-response total pressure probe was fabricated by installing a fast-response pressure sensor near the head of a Kiel probe. And it measured the phase-lock averaged total pressure downstream of an 1-stage axial turbine. The developed probe successfully measured the accurate total pressure distribution at rotor exit and made possible to evaluate the loss distribution and the accurate performance of turbomachinery.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.1
• /
• pp.61-68
• /
• 2018

In this paper, we described about methods and results to verify the Tx/Rx beam characteristics of a planar active phased array antenna as using a near-field measurement. The near-field system can effectively measure multiple beams and predict the performance degradation due to the partial failure of individual elements. Also, it can accurately predict the EIRP relating to detection performance of the active phased array radar. We briefly described the near-field measurement method to verify the Tx/Rx beam characteristics, and then verified the effectiveness of measurement method by analyzing the measured results.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1018-1021
• /
• 2009

Define a designated eye position (DEP) for the 3D displays is a critical issue. It shows the system performance without content issue. We use luminance meter to capture these optical characteristic and discuss between one point measurement, two points measurement and three points measurement situation.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.361-364
• /
• 2001

Speech quality measurement is sorted subjective and objective speech quality measurements based on the mathematics representation. Between two, subjective speech quality measurement is able to be evaluated more accurate speech quality then objective one but it has a demerit such as taking much more time and cost to performance it. However, using objective speech quality measurement being able to predict the result of evaluating the subjective speech quality compliments the demerit of subjective standards which is mentioned former. In this paper, we propose the objective speech quality measurement in order to evaluate naturalness assessment approximately like subjective speech quality measurement. We measured naturalness of speech with estimating speaking rate, variation of pitch and energy.