• Journal of KIBIM
• /
• v.5 no.2
• /
• pp.1-11
• /
• 2015

Despite a lot of research on BIM, there is no quantitative study to measure accurately the performance of BIM coordination service. Thus, this study suggested method to measure the performace of BIM coordination services, applying queueing models in the field of management science. To analyze queuing system of BIM coordination services, a group of BIM coordinator were selected. Through focus group interviews with experts were used in the analysis to derive mean arrival rate(${\lambda}$), mean service rate(${\mu}$) of BIM coordination services. Single-server queuing model(M/M/1), multiple server queuing model(M/M/s) is utilized for the BIM coordination services performance measurement in construction phase. This study has significant quantitative performance measurement approaches that can be utilized in the decision-making for the improvement of the BIM coordination services and to support the review of the alternatives accordingly. But There is a limit but it is difficult to take into account the increase or decrease of the cost of alternatives according to the review.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.868-871
• /
• 2007

The current economy is summarized by increasing business competitiveness and leaner organizations, and the risk and uncertainties inherent in such dynamic environments have increased the importance of managing organizational knowledge. Like the preceding, the construction industry is required to make an effort for survival and takeoff, and most construction companies recognize that knowledge management improves efficiency and effectiveness and the necessity on the innovation of business itself and it is the current of the times. But at this point in time, companies have doubts about performance following the introduction of KM, and set to show interest in developing a measurement method. So, This study analyzes the existing model for performance measurement and based on results derived, presents the method for performance measurement.

• 전자공학회논문지 IE
• /
• v.43 no.3
• /
• pp.13-21
• /
• 2006

Ryu et al. proposed a multiple target angle tracking algorithm using the angular measurement obtained from the signal subspace estimated by the output of sensor array. Ryu's algorithm has good features that it has no data association problem and simple structure. But its performance is seriously degraded in the low signal-to-noise ratio, and it uses the angular measurement obtained from the signal subspace of sampling time, even though the signal subspace is continuously updated by the output of sensor array. For improving the tracking performance of Ryu's algorithm, a measurement fusion method is derived based on ML(Maximum Likelihood) in this paper, and it admits us to use the angular measurements obtained form the adjacent signal subspaces as well as the signal subspace of sampling time. The new target angle tracking algorithm is proposed using the derived measurement fusion method. The proposed algorithm has a better tracking performance than that of Ryu's algorithm and it sustains the good features of Ryu's algorithm.

• Journal of Korean Port Research
• /
• v.15 no.1
• /
• pp.99-105
• /
• 2001

An on-line refractrometer made of easily obtainable materials is built to determine the salinity and temperature of sea water, and its performance is examined by applying the refractometer to known salt solution. Since refractive index and temperature are measured simultaneously, it is possible to compensate the effect of temperature for accurate measurement. The outcome of salinity measurement for the different concentrations of salt solution indicates that the device is suitable for the salinity measurement by yielding stable and reproducible reading.

• Journal of the Korea Construction Safety Engineering Association
• /
• s.48
• /
• pp.64-74
• /
• 2009

Measurement is a essential part in all kinds of industry, especially in manufacturing. But until now, measurement hasn't been located to the core of manufacturing in domestic. This improvement guide line for the multilateral problems of measuring instrument investigation of small and medium-sized enterprises. To use measuring treat it must be accustomed with the structure, the performance, the method. must be corrected periodically. The correcting-schedule is established with accuracy, stability, purpose, condition, and frequency.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.422-424
• /
• 2009

In this paper, we studied methods that measure chip stack height using slit beam in mold equipment among semiconductor manufacture equipments. We studied two methods to improve chip stack height measurement performance. First, it is relation of camera exposure time and height measurement repeatability. Second we could improve measurement performance applying method of least mean square method for measurement error minimization about PCB(Printed Circuit Board) flexure phenomenon.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.419-422
• /
• 2004

Qualitative management structure of construction companies in Korea are relatively inadequate in comparison with quantitative growth. To improve qualitative management structure, we need to make impartial performance measurement system which arouse participants responds. It is important to select and decide performance measurement index to company and participants. And it is also important to take the weights. For that, we figure out the weights of performance measurement with HSC by Kaplan & Norton.'1'o find out the characteristics of the weights which was classified according to size of the construction company, we analyse and compare with each weights. The result of this Paper will contribute to operate performance measurement system that make raise efficiency and maximize the performance of companies.

• Journal of the Korean Society for Railway
• /
• v.9 no.6 s.37
• /
• pp.671-676
• /
• 2006

A measurement system was developed in this study. It conducts on-line testing and evaluation of tilting train express(TTX). The measurement system is installed in each train for the performance measurement during the test run. It is composed of software part, hardware part and can measure various signals such as vehicle velocity, catenary voltage, motor temperature. The software controls the hardware of the measurement system, performs the analysis and calculation of measurement data and acts as interface between users and the system hardware. The hardware is consisted of 7 DAMs(Data Acquisition Modules) and 6 monitoring modules.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.6
• /
• pp.65-75
• /
• 2022

As performance measurement is important for systematic management, the key indicators for performance measurement have been consistently researched in the construction industry. However, there are only a few cases in which performance measurement is performed because it requires strenuous efforts to collect data for measurement. Unlike the public sector, which has been collecting project data through laws, the private sector has very little data to measure performance. In contrast, supervision work concerns important data necessary for the performance management on building construction sites in accordance with the Building Act. Therefore, in this study, we used the data from supervisory reports to measure the performance of private building projects. First, we derived 6 performance areas and 15 indicators through a few rounds of expert group discussions and 2 surveys. Then, we identified the performance indicators with high feasibility of data collection and computed their degree of significance via the analytic hierarchy process. It is expected that the performance indicators and their computational processes derived in this study can be used to systematically measure the performance and aid the speedy diagnosis of private building construction sites.

• Journal of Internet Computing and Services
• /
• v.16 no.3
• /
• pp.117-126
• /
• 2015

The concept of Creating Shared Value (CSV) has emerged as a solution for companies' sustainable growth and social problems through collaboration of business activities and social demand. Therefore, studies on shared value creativity and measurement of companies' performances are required. However, most recent studies have applied the CSV concept to existing business models or measure shared value considering only economic value. Few studies have considered the appropriateness of applying the CSV or discussed performance measurement with respect to industry characteristics. This study selects the industry expected to have the greatest created value with applying the CSV, and then suggests measurement of performance in this industry. First, through the expert interview, the study selects one from among South Korea's 10 main industries, which is expected to solve social demand through convergence with the IT industry, and to create new value for a traditional industry. The Home Appliance industry was selected as appropriate, because it has industrial growth stagnation under the smart environment. Moreover, it is facing problems such as energy savings and environmental issues. The study goes on to suggest, based on Michael Porter's three strategic levels, measurement variables of the value creation process and performance. This study has limitations from an empirical perspective. However, as the interest of applying CSV to business is growing, it is meaningful to explore the CSV strategies activities and measurement performance based on industry-specific characteristics.