• Journal of Navigation and Port Research
• /
• v.29 no.5 s.101
• /
• pp.431-437
• /
• 2005

In korea, Freight generation models developed in korea were estimated by spatial unit method which predict freight flow by traffic zone. But it is difficult to predict freight generation using these models, because there are the difference of the totality method of sampling data on freight volume and the variability of the variables by these models on each case study, This study developed new estimation model to predict freight flow which is generated from each company using the characteristics of each company such as the freight outbound & inbound volume, the number of employee, sales, gross area, land area. This model is simpler than the that of spatial unit and can apply to the other region. The subjects of study were companies in metropolitan area and types of model were exponential regression models. The adequate explanatory variable in the models were sales. this study have a uniqueness apply micro research method to estimate freight generation not use spatial unit method but use flow unit method by each company unit.

• Journal of Navigation and Port Research
• /
• v.39 no.4
• /
• pp.361-370
• /
• 2015

Wind energy began to receive attention as a new alternative fuel since 20 years ago and is growing as a booming global business model. Global wind power generation in the world has been continuously increasing for the past 10 years, accounting for over 30% of cumulative rate compared to total power generation. Global demand for wind power generation is gradually expanding due to restriction on carbon emission and environmental problems caused by increased greenhouse effect. Accordingly in this study, current transportation routes are classified into three types including access-priority route, economics-priority route, and convenience- priority route depending on distribution characteristics of wind power equipment in order to suggest transportation methods other than ships. The three types of transportation route that this study declared can make the Wind power equipment manufacturing companies can judge not only the duration of transportation but also effectiveness and economic feasibility. It means that the manufacturers can analyze and compare the effectiveness and economic feasibility, which are proceed by the shipping company and freight forwarder until now days.

• Journal of Navigation and Port Research
• /
• v.40 no.3
• /
• pp.113-120
• /
• 2016

If there are containers stacked upon the container to be fetched out of a container yard to vessel, rehandling which moves those containers to other places temporarily is needed. In order to avoid such rehandling, remarshalling which rearranges containers should be done before the vessel arrives. The remarshalling plan is commonly generated within a bay. It happens, however, that the generation of the intra-bay remarshalling plan within the permitted time is not possible because of bad stacking conditions. This paper presents the remarshalling algorithm which uses the empty slots of the neighboring bay as a temporary storage space. Simulation experiments have shown that the presented algorithm can generate the remarshalling plan within the permitted time under any staking conditions.

• Journal of Navigation and Port Research
• /
• v.31 no.1 s.117
• /
• pp.89-97
• /
• 2007

This paper presented a approach to the measurement of efficiency in container terminals in Korea. To perform this objective, it used Data envelopment analysis(DEA) which has particular applicability in the service sector. DEA as mathematical programming techniques enables relative efficiency ratings to be derived within a set of analysed units. So this paper investigated the efficiency employing DEA-CCR and DEA-BCC Model on data for 15 container terminals from 1998 through 2005. Results of this paper, suggested to some plan for operation strategy in Container terminals.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.10a
• /
• pp.220-221
• /
• 2009

One of the important performance measure for productivity at container terminals is the working productivity in the quay. working scheduling of quay cranes (QCs) gives a significant impact on the quay working productivity. The recent managers of the terminals pay high interests in equipment investment and operation methods with a new concept in order to enhance the quay working productivity. The double cycle or dual cycle, which is a method to increase the quay productivity with no application of new equipment, but with the change of operations, has been received strong attention in academic research. The majority of studies until this time has been realized the quay work as the bottleneck and focused on those works. However, if the QCs do notver, it the Cs d-trotver,(CT) if t the Cs, there would be the pos ibilf tes that the effectiveness of them is decreasedveaused by the longer, if t the Cs. Thus, this paper, suggests the solutions on the con th scheduling for the dual cycle operation considering the YT.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.10a
• /
• pp.210-211
• /
• 2009

The container has the inherent number which for distinguish among containers. When containers were handled, the container No. identify work must be precede. The work goes by fond in Most of the ports. It has not only inefficient time and cost but also error as worker's condition. The measure is operated that to use the camera on the spreader of quay crone to solve that problem. This measure, however, showed up the difference q recognition rates at weather, camera's condition, etc The ways could be considered both improvement of hardware and conversion of error number to solve the measure. This paper defines the problem and study an efficient solution.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.6
• /
• pp.1505-1512
• /
• 2007

The RFID Technology (which is importantly used at the Ubiquitous environment) is attached to all of the units like the ID cards and then information on the units and units' environment is transferred and processed through the radio frequency. so it is the no touched recognition system. RFID Technology's research of the middle ware and wireless interface etc. is currently conducted and variously broaden like the industry of the distribution and logistics. This paper suggests that the gate control system which is based on RFID middle ware is realized to prevent the district and facility for security. The indication of this paper is that algorithm (which is to certificate Users' enterance through RFID EPC code) is proposed and realizes the user certification module, the control module of the gates' opening and closing, the maintenance module of the gate, the display module of coming and going information, test program ect. through RFID technology.

• The KIPS Transactions:PartD
• /
• v.15D no.1
• /
• pp.73-86
• /
• 2008

Because of its capability of automatic identification of objects, RFID(Radio Frequency Identification) technologies have extended their application areas to logistics, healthcare, and food management system. Load balancing is a basic technique for improving scalability of systems by moving loads of overloaded middlewares to under loaded ones. Adaptive load balancing has been known to be effective for distributed systems of a large load variance under unpredictable situations. There are needs for applying load balancing to RFID middlewares because they must efficiently treat vast numbers of RFID tags which are collected from multiple RFID readers. Because there can be a large amount of variance in loads of RFID middlewares which are difficult to predict, it is desirable to consider adaptive load balancing approach for RFID middlewares, which can dynamically choose a proper load balancing strategy depending on the current load. This paper proposes an adaptive load balancing approach for RFID middlewares and presents its design and implementation. First we decide a performance model by a experiment with a real RFID middleware. Then, a set of proper load balancing strategies for high/medium/low system loads is determined from a simulation of various load balancing strategies based on the performance model.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.215-219
• /
• 2004

Metal-chelate derivatives have been investigated intensively as an emitting layer and recognize to have excellent electroluminescence(EL) properties. We synthesized new luminescent material, 1,4-dihydoxy-5,8-naphtaquinone $Aiq_3$ complex($Al_2Nq_4$) and investigated the electrical optical properties. OLED has potential candidates for information display with merits of thickness, low power and high efficiency. Although the OLED show a lot of advantages for information display, it has the limit of inorganic(metal)/ organic interface. In this study, the two methods are used to study the interface of metal/organic in OLED. First, we treated $O_2$ plasma on an ITO thin film by using RIE system, and analyzed the ingredient of ITO thin film according to change of the processing conditions. We used the RDS and the XPS for the ingredient analysis of the surface and bulk. We measured electrical resistivity using Four-Point-Probe and calculated sheet resistance, and ITO surface roughness was measured by using AFM. We fabricated OLED using substrate that was treated optimum ITO surface. Second, we used the buffer layer of CuPc to improve the characteristics of the interface and the hole injection in OLED. The result of the study for electrical and optical properties by using I V L T System(Flat Panel Display Analysis System), we confirmed that the electrical properties and the luminance properties were improved.

• Journal of Navigation and Port Research
• /
• v.36 no.8
• /
• pp.665-671
• /
• 2012

A remarshalling is studied as an important operational strategy in an automated container terminal to enhance the productivity of container handling. This means the rearrangements of the containers scattered at a vertical yard block. The dispatching problem for remarshalling is selecting the remarshalling operation considering the available operation time and deciding the operation sequencing to maximize the effectiveness of remarshalling. This study develops the optimal mathematical model for yard crane dispatching problem with mixed integer program and explains dispatching problem using an example. However it is difficult to apply this model to a field problem because of its computational time. Therefore, we compare the representative 5 dispatching rules for real world adaption. In a numerical experiment, maximum weight ratio(MR) rule shows an overall outstanding performance.