• Korean Chemical Engineering Research
• /
• v.58 no.3
• /
• pp.450-457
• /
• 2020

In the previous study, there was a big difference between the tendency of the delivery efficiency of Yo-Pro-1 and the expression efficiency of the CFP gene, but there was a problem that could not provide a clue to this problem. Therefore, this study aimed to present a clue to this problem by quantifying and comparing the delivery efficiency after labeling DNA using a fluorescent dye, which was one of the methods for quantifying biomolecules. As a fluorescent dye for labeling, Yo-Pro-1 was used, and the delivery efficiency of the fluorescent dye Yo-Pro-1 and the labeled DNA was compared. The delivery efficiency of Yo-Pro-1 and labeled DNA according to the voltage condition of the digital electroporation system was maximized at 96 V, and the delivery efficiency tended to decrease as the voltage increased further. In the comparison of the delivery efficiency of Yo-Pro-1 and labeled DNA according to the number of voltage application conditions, the delivery efficiency was maximized at the number of 8 voltage application times for both delivery materials, and the delivery efficiency tended to decrease as the number of voltage application increases further. Through the two results, it was confirmed that the delivery efficiency using Yo-Pro-1 in the digital electroporation system represents the delivery efficiency of the system well. In addition, through the results of this study, the difference between the tendency of the delivery efficiency of Yo-Pro-1 and the expression efficiency of the CFP gene shown in the preceding study was not the result of the difference in the delivery efficiency of the delivery material, but it can be predicted to be due to a problem with the expression process of the genetic material that had been delivered.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.527-533
• /
• 2004

This study has based on RTKGPS and DGPS and Digital Video Camera to 3-dimensional position data of road, as a Road Spatial Information. Economic efficiency analysis was applied to road spatial information system built up by four different methods such as conventional surveying, RTK GPS, DGPS, and Digital Video Camera. As a result of analysis, it was shown conventional surveying 100%, it was shown that about 64% in RTKGPS, it was shown that about 63% in DGPS, it was shown that about 37% in Digital Video Camera cost-saving.

• The Korean Journal of Health Service Management
• /
• v.9 no.3
• /
• pp.57-67
• /
• 2015

Objectives : This study has analyzed the relationship between DEA efficiency of costs-patient revenues, productivity per value added and management performance in mental hospitals. Methods : The relationship between DEA efficiency of costs-patient revenues, the productivity per value added and management performance were conducted with correlation analysis and logistic regression. Results : The DEA efficiency of costs-patient revenues had a significant causal relationship with the value added ratio to gross revenue indexing productivity per value added. On the other hand, it was revealed that the operating margin indexing management performance had a slightly significant causal relation with DEA efficiency of costs-patient revenues. Conclusions : The material costs should be focused on the management stability of mental hospitals, and known to the desirable management orientation for the higher efficiency of costs-patient revenues.

• Korean Journal of Organic Agriculture
• /
• v.21 no.4
• /
• pp.487-500
• /
• 2013

The purpose of this study is to estimate efficiency of environmental-friendly agricultural product by using Data Envelopment Analysis. A proposed method employs a bootstrapping approach to generating efficiency estimates through Monte Carlo simulation resampling process. The technical efficiency, pure technical efficiency, and scale efficiency measure of strawberry by pesticide-free certification is 0.967, 0.995, 0.968 respectively. However those of bias-corrected estimates are 0.918, 0.983, 0.934. We know that the DEA estimator is an upward biased estimator. In technical efficiency, average lower and upper confidence bounds of 0.807 and 0.960. According to these results, the DEA bootstrapping model used here provides bias-corrected and confidence intervals for the point estimates, it is more preferable.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.5
• /
• pp.508-514
• /
• 2015

In this paper, the powertrain efficiency is analyzed for the input split type hybrid electric vehicle. For considering the powertrain loss, the power loss models of planetary gear and motor are applied. And, the mathematic equations of powertrain speed and torque are found by using the lever analogy. With the above models and equations, the powertrain efficiency is analyzed for the 0 to 180 km/h vehicle velocity range. From the analysis results, it is found that the transmission efficiency with the power loss of planetary gear is smaller maximum 2.1% than the transmission efficiency without the power loss of planetary gear.

• Journal of information and communication convergence engineering
• /
• v.10 no.2
• /
• pp.97-102
• /
• 2012

The differential global positioning system (DGPS) transmits a GPS enhancement signal using a top-loaded monopole antenna in the medium frequency range. The top-loaded antenna in the medium frequency band can attain a radiation efficiency on the order of 10%. The antenna ground plane characteristics affect the antenna radiation efficiency. To improve the radiation efficiency, it is necessary to install the antenna on a ground plane with large enough physical dimensions and good conductivity. The antenna radiation efficiency is a primary factor in determining the DGPS service area. The service area of the DGPS using a medium frequency band is dominantly affected by the antenna radiation efficiency. To determine antenna radiation efficiencies accurately, the antenna radiation efficiencies of DGPS are deduced from the propagation power in this paper. Based on the deduced antenna radiation efficiencies, the service area for the Korean nationwide-DGPS is analyzed and evaluated.

• Journal of environmental and Sanitary engineering
• /
• v.12 no.1
• /
• pp.39-48
• /
• 1997

The study was conducted to know the possibility that the removal efficiency of organic and suspended solids(SS) could be increased by suppling of sea water and the optimum amount of sea water to be supplied treat bleaching waste water by lime coagulation settlement at pulp mill process. When the lime dosage was increased, the removal efficiency of COD and SS in the waste water was increased based on the removal efficiency of COD and SS. The lime dosage and removal efficiency was increased proportionally with the lime concentration of 4,000 mg/l, but the increase of removal efficiency was presented slightly above the 4,000mg/l. It was evaluated that the removal efficiencies of COD and SS could be increased and the requirement of lime dosage could be decreased by the sea water supplement. The removal efficiency of SS was most increased when the sea water supplement was 10% or more in the waste water. The removal efficiencies of COD was the best at 4% sea water excepting the dilution efficiency by sea water supplement.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.33 no.4
• /
• pp.83-100
• /
• 2008

We propose a new aggressive formulation of cross-efficiency in Data Envelopment Analysis(DEA). In the traditional aggressive formulation, the efficiency score of a test DMU is maximized as the first goal while an average of efficiency scores of peer DMUs is minimized as the second goal. The proposed model replaces the second goal with the minimization of the best efficiency score of peer DMUs. We showed the model is a quasi-convex optimization problem, and for a solution method we developed a bisection method whose computational complexity is polynomial-time. We tested the model on 200 randomly generated DEA problems, and compared it with the traditional model in terms of various criteria. The experimental results confirmed the effectiveness and usefulness of the proposed model.

• Journal of Surface Science and Engineering
• /
• v.39 no.5
• /
• pp.223-228
• /
• 2006

The current efficiency of copper anode containing impurities in copper sulfate solution for electrorefining was studied at various current type such as direct current, variable current and periodic reverse current. The passivity behavior was investigated by galvanostatic technique. The results obtained were that current efficiency of variable current was higher than those of direct current and periodic reverse current. The increased current efficiency could be explained by the formation of slime structure with lower average resistance due to variable current. The frequency of various factors in variable current condition has a greatest effect on current efficiency. It appeared that frequency increased current efficiency when increased from 1 to 4, but further increases did not have an effect.

• Journal of the Semiconductor & Display Technology
• /
• v.23 no.2
• /
• pp.50-54
• /
• 2024

In this paper, we propose a theoretical method to systematically analyze the power conversion efficiency of a single-phase PFC switching rectifier. Boost-type PFC was organized in order of highest correlation with load current using steady-state analysis results and introduced the concept of loss factor. The loss factors for each major element are summarized and presented in a table. This paper makes it easier to understand the internal loss and power conversion efficiency of the rectifier for loss factors. Lastly, to confirm the validity of the efficiency analysis results reflecting the loss factors, loss and efficiency analysis of the 2.5kW PFC rectifier was performed. The results were compared with data from a 2.5kW PFC circuit for evaluation. As a result, the usefulness of power conversion efficiency analysis reflecting the loss factors proposed in this paper was confirmed.