• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.3
• /
• pp.296-303
• /
• 2014

The Axiom propeller is a unique 3 bladed propeller and it enables to generate the same amount of thrust going ahead as it does going astern because of its 's' type skew-symmetric blade section. A earlier variant of the design (Axiom I propeller) performed a low propeller efficiency, maximum 35 % efficiency, and further blade outline design was carried out to achieve a higher efficiency. The optimized new blade outline (Axiom II propeller) has more conventional Kaplan geometry shape than Axiom I propeller. Model tests of open water performance and propeller cavitation for both propellers were conducted at Emerson Cavitation Tunnel in order to compare their performances. Experiment results revealed that Axiom II propeller provides a maximum 53 % efficiency and provides better efficiency and cavitation performance over the Axiom I propeller under similar conditions.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1018-1020
• /
• 2000

In the operation and maintenance activity of hydro turbine generator, one of the important parameters is the efficiency. This study analyze the case of efficiency management by pressure time method and survey the application of this method through the actual test. And it is confirmed that the Pressure time method exccesively limit the general condition to be applied. If index method is used for efficiency management because the index method calibrated by absolute discharge(by flow of pressure time method) is very accurate. it make to be able to manage the realtime efficiency.

• The Journal of Fisheries Business Administration
• /
• v.41 no.3
• /
• pp.45-58
• /
• 2010

This study estimated the technical efficiency of coastal composite fishery in Korea by using the data envelopment analysis (DEA) and the stochastic frontier analysis (SFA) methods, and the results on the respective method were compared. In the DEA method, the constant returns to scale (CRS) and the variable returns to scale (VRS) output-oriented DEA models were separated and technical efficiencies were estimated, respectively. The average estimated value of technical efficiency by the SFA method (0.633) was found to be lower than that by the VRS-DEA method (0.738), while it was higher than that by the CRS-DEA method (0.479). It was found that strong correlation exists between the SFA method and the VRS-DEA method. The method which can utilize both methods in mutually complementing way for the estimation of technical efficiency was also considered.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2971-2976
• /
• 2008

Recently, there has been growing interest in the oxyfuel combustion cycle since it enables high-purity CO2 capture with high efficiency. However, the oxyfuel combustion cycle has some important issues regarding to its performance such as the requirement of water recirculation to decrease a turbine inlet temperature and proper combustion pressure to enhance cycle efficiency. The purpose of the present study is to analyze performance characteristics of the oxyfuel combustion cycle with different turbine inlet temperatures and combustion pressures. It is expected that the turbine inlet temperature improves cycle efficiency, on the other hand, the combustion pressure has specific value to display highest cycle efficiency.

• Journal of Information Display
• /
• v.13 no.4
• /
• pp.139-143
• /
• 2012

In this study, optical simulation was used to compare three optical structures that could be applied to the typical organic light-emitting diode to increase the outcoupling efficiency. These were spherical scattering particles (treated as Mie scatterers) embedded in the glass substrate, microlenses formed on the glass substrate, and a diffusing layer (DL) with a Gaussian scattering distribution function inserted between the indium tin oxide (ITO) and the glass substrate. It was found that the application of microlens array and that of scattering particles in the glass substrate exhibited similar enhancements in the outcoupling efficiency when the density and the refractive index of the scattering particles were optimized. The DL located at the interface between the glass and the ITO further enhanced the efficiency because it could further extract the trapped light in the waveguide mode. The appropriate combination of these three structures increased the outcoupling efficiency to about 42%, which is much greater than the typical values of 15-20% when there is no optical structure for light extraction.

• Journal of the Korean Home Economics Association
• /
• v.50 no.2
• /
• pp.65-74
• /
• 2012

This study was conducted to examine how children perceive emotional support, emotional regulation and self-efficiency. They came mainly from three elementary schools which are located in Gwangju metropolitan city. Questionnaires were provided to these students and the completed questionnaires were collected. Participants were 503 students. The results were as follows. First, only emotional support and self-efficiency directly affected in the school adjustment. Moreover, emotional support was the most influential factor. Second, although emotional support directly affected in the school adjustment, it also indirectly affected in the school adjustment through emotional regulation. Third, emotional regulation did not directly affect in the school adjustment, but on the other hand, it indirectly affected in the school adjustment through self-efficiency.

• Membrane and Water Treatment
• /
• v.10 no.1
• /
• pp.39-44
• /
• 2019

LID facilities do not consider environmental factors, and due to inappropriate vegetation planting causing degradation in efficiency due to plant damage and difficulty in maintenance. Therefore, in this study, assessment of impact environmental factor by seasonal variation of chlorophyll and growth of vegetation planted in LID technologies and change of pollutant reduction were conducted. In the case of B-SJ and B-RI, growth rate decreased after summer (August), and B-MG showed steady growth until autumn (September). Chlorophyll was found to increase during spring season while it decreased during autumn season. The chlorophyll concentration was found to affect the plant growth pattern. TN reduction efficiency was highest with greater than 80% efficiency in summer, and it was analyzed that plants were identified as the main factor affecting the seasonal reduction efficiency of TN. Also, temperature and relative humidity were analyzed to affect plant growth, activity and pollutant removal efficiency. Plant type and growth pattern are considered as factors to be considered in selection of appropriate plant types in LID technologies.

• Journal of the Korean Society of Safety
• /
• v.33 no.4
• /
• pp.84-89
• /
• 2018

The number of landslides has increased since the 2000s due to the increased frequency of heavy rainfall caused by abnormal weather. A variety of debris flow prevention facilities have been installed as a countermeasure against this problem. However, it is not easy to evaluate the efficiency of debris flow prevention structures except for the structures with constant volume such as the erosion dam, because the other structures are limited to be reproduced in simulation program for debris flow. Therefore, the methods by which the debris flow prevention structures were modeled were proposed, and the efficiency of four prevention structures installed in Baekyang Mt. in Busan was evaluated with UDS, which accuracy had been verified, using these methods. The initial amount of debris flow was determined based on landslide which occurred in 2014, and specifications of the complex retaining walls around the settlements were measured and applied modeling for terrain. The numerical results showed that the efficiency of debris flow prevention structures could be quantitatively presented. Among the debris flow prevention structures installed in Baekyang Mt., prevention structure of barrier type for debris flow was the most efficiency and debris flow prevention device was the lowest efficiency when the only depth of debris was evaluated. It seems that this study is meaningful to propose the methods which were used to model the debris flow prevention structures that could not be reproduced in most 2D debris flow numerical analysis programs. If precise verification of the presented methods is carried out, it will be possible to provide clear criteria for the efficiency evaluation method of disaster prevention structures.

• Journal of Digital Convergence
• /
• v.17 no.12
• /
• pp.129-137
• /
• 2019

The purpose of this study is to analyze the efficiency of budget utilization of science and technology by the Chinese autonomous province and to present the direction of improvement. Data were obtained from the 2013-2017 statistical yearbook of higher education published by the Ministry of Education of China, and efficiency was analyzed using the malmquist analysis method. The analysis found that the low technological progress caused changes in the productivity MPI index, and that cities affected by technological efficiency needed to improve internal factors such as internal coordination and restructuring of universities in the region to increase efficiency. And it was found that areas affected by technological change needed proper response to external factors such as government policy, economic environment, social environment or technological development. This study is meaningful in that it presented reference data in enhancing efficiency of budget utilization of science and technology by autonomy of China, and it is necessary to establish strategies and study essential factors to increase efficiency of inefficient areas in the future.

• Journal of Digital Convergence
• /
• v.17 no.12
• /
• pp.147-157
• /
• 2019

The purpose of this study is to analyze the efficiency of urbanization in 31 provinces and cities in China, including both desirable and non-expected outputs produced during the urbanization process. Efficiency was analyzed by applying the SBM-DEA model using the urbanization calculation data of 2017 in 31 provinces and cities in China. The results show that the urbanization efficiency of eastern region is the highest, followed by central region and northeast region, and the urbanization efficiency of western region is the lowest. This study is meaningful in that it analyzes the efficiency of urbanization in 31 provinces and cities in China and suggests the direction of continuous urbanization policy. This study is limited in that it does not reflect the past trend only by conducting cross-sectional analysis for one year in 2017, and it is necessary to comprehensively evaluate urbanization efficiency by conducting additional longitudinal area analysis in the future.