• Journal of Korea Technology Innovation Society
• /
• v.5 no.2
• /
• pp.189-211
• /
• 2002

The research shows how the technological change of 'Information and Communication Technology' (ICT) is accompanied with the usage change. It aims to provide a better conceptualization with empirical findings about the fact that the technological development of ICT is a convergence process of ICT factors with the usage of ICT moving from a limited coverage toward a general-purpose. The research adapts a descriptive methodology on a historical matter and demonstrates how it can be conducted through analytical description of Input-Output tables (I/O) the over periods. The case is about the UK with sequential I/O during 1970s- 90s.

• ETRI Journal
• /
• v.37 no.2
• /
• pp.317-327
• /
• 2015

A reliable analysis of consumer preference from a large amount of purchase data acquired in real time and an accurate customer characterization technique are essential for successful direct marketing campaigns. In this study, an optimal segmentation of post office customers in Korea is performed using a subspace projection-based clustering method to generate an accurate customer characterization from a high-dimensional census dataset. Moreover, a traditional temporal mining method is extended to an algorithm using the MapReduce framework for a consumer preference analysis. The experimental results show that it is possible to use parallel mining through a MapReduce-based algorithm and that the execution time of the algorithm is faster than that of a traditional method.

• ETRI Journal
• /
• v.31 no.5
• /
• pp.525-533
• /
• 2009

This paper proposes a distributed borrowing addressing (DIBA) scheme to solve problems of failure in address assignments resulting from limited tree depth and width when the distributed address assignment mechanism is used in a ZigBee/IEEE 802.15.4 wireless sensor network. DIBA is a method of borrowing addresses from neighbor nodes for newly entering nodes and assigning the borrowed addresses. Its network or sensing coverage can increase with almost the same overhead as the existing method. DIBA is a simple and lightweight means of addressing and routing, making it suitable for wireless sensor networks. Simulations showed that DIBA is a distributed addressing scheme with consistently excellent performance.

• ETRI Journal
• /
• v.30 no.5
• /
• pp.674-684
• /
• 2008

This paper proposes a dual addressing scheme (DAS) for IPv6 over IEEE 802.15.4 wireless sensor networks (WSN). DAS combines a global unicast address to cope with association link changes and node mobility, and it links local addresses to lighten the overhead of the system to save energy and resources. This paper describes DAS address formats, address autoconfiguration, and address translation tables in the gateway. A detailed description of DAS is provided through examples. Simulations are performed to demonstrate the performance improvements of the DAS compared with the IPv6-based WSN, which uses the conventional single address.

• ETRI Journal
• /
• v.30 no.5
• /
• pp.696-706
• /
• 2008

With the increasing need for intelligent environment monitoring applications and the decreasing cost of manufacturing sensor devices, it is likely that a wide variety of sensor networks will be deployed in the near future. In this environment, the way to access heterogeneous sensor networks and the way to integrate various sensor data are very important. This paper proposes the common system for middleware of sensor networks (COSMOS), which provides integrated data processing over multiple heterogeneous sensor networks based on sensor network abstraction called the sensor network common interface. Specifically, this paper introduces the sensor network common interface which defines a standardized communication protocol and message formats used between the COSMOS and sensor networks.

• ETRI Journal
• /
• v.37 no.3
• /
• pp.617-625
• /
• 2015

In this paper, a steering control system for the path tracking of autonomous vehicles is described. The steering control system consists of a path tracker and primitive driver. The path tracker generates the desired steering angle by using the look-ahead distance, vehicle heading, and a lateral offset. A method for applying an autonomous vehicle to path tracking is an advanced pure pursuit method that can reduce cutting corners, which is a weakness of the pure pursuit method. The steering controller controls the steering actuator to follow the desired steering angle. A servo motor is installed to control the steering handle, and it can transmit the steering force using a belt and pulley. We designed a steering controller that is applied to a proportional integral differential controller. However, because of a dead band, the path tracking performance and stability of autonomous vehicles are reduced. To overcome the dead band, a dead band compensator was developed. As a result of the compensator, the path tracking performance and stability are improved.

• ETRI Journal
• /
• v.37 no.4
• /
• pp.793-803
• /
• 2015

We propose a novel HMI UI/UX for an in-vehicle infotainment system. Our proposed HMI UI comprises multimodal interfaces that allow a driver to safely and intuitively manipulate an infotainment system while driving. Our analysis of a touchscreen interface-based HMI UI/UX reveals that a driver's use of such an interface while driving can cause the driver to be seriously distracted. Our proposed HMI UI/UX is a novel manipulation mechanism for a vehicle infotainment service. It consists of several interfaces that incorporate a variety of modalities, such as speech recognition, a manipulating device, and hand gesture recognition. In addition, we provide an HMI UI framework designed to be manipulated using a simple method based on four directions and one selection motion. Extensive quantitative and qualitative in-vehicle experiments demonstrate that the proposed HMI UI/UX is an efficient mechanism through which to manipulate an infotainment system while driving.

• Journal of Information Technology Services
• /
• v.10 no.4
• /
• pp.33-46
• /
• 2011

This research focus on the economic activity as consumer and producer traits of future customers in the convergence age. We assess level of convergence for digital devices and services respectively by questionnaire survey and interview for 14 professions. And then, for evaluating convergence level and usage of digital services of each respondents, we conducted the questionnaire survey for 343 samples. Findings of our research hold that the group who showed higher level of convergence tends to use the socialized digital services more. Convergence generation were heavy users in appstore on smart-phone and wireless game and more participating. In digital service area, facebook/cyworld, twitter, UCC, portal, internet community in digital service. Convergence generation are global network communication, buying decision making activity, actively opinion expression, prosumer attitude, dependency on digital device, experience based purchase behavior, enthusiastic information sharing.

• 한국터널공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.270-281
• /
• 2005

An especial attention for old tunnel safety is required on increasing of The various tunnel recently. Specially, the lining investigation method of the old tunnel will be able to presume condition of concrete lining indirectly. Because it is many restriction thought of environment and ground condition investigation method of tunnel lining rear. This study carried out section & convergence measurement of part which was deformed in tunnel lining. It had been observed for the change of tunnel behavior with a continuous measurement. It has been analyzed for a cause of tunnel deformation and inspected for the effect after a repair-reinforcement to tunnel compared with the effect before those by structure analysis. By establishing automatic measurement system after repair-reinforcement to tunnel, it would be accomplished to convergence measurement continually. As a result, it was observed that deflection and deformation of tunnel was convergent. but it should be followed to a continuous maintenance because of unstable ground condition, cause of inner tunnel, environment. The railroad tunnel which was executed a reinforcement of the tunnel lining must investigate the close condition of reinforcement lining and concrete lining.

• Journal of Computing Science and Engineering
• /
• v.7 no.3
• /
• pp.204-210
• /
• 2013

We present the motivation, design and implementation of a smart home system in Korea. Our system is open, extensible, integrated, intelligent, and usage-centric. We detail the challenges and key design requirements for the smart home system based on our past experiences, and show how convergence system design is a capable methodology for enabling an integrated and multi-faceted home management system that encompasses energy management, home appliance control, environment management, u-health, and living support functionalities under a single unified design. Using energy management as a specific case study, we demonstrate how convergence system design can encapsulate technology heterogeneity and hardware-software disparity without compromising simple yet powerful user interfaces.