• Korean Journal of Remote Sensing
• /
• v.39 no.2
• /
• pp.233-246
• /
• 2023

In terms of understanding the water cycle and efficient water resource management, the importance of soil moisture has been highlighted. However, in Korea, the lack of qualified in-situ soil moisture data results in very limited utility. Even if satellite-based data are applied, the absence of ground reference data makes objective evaluation and correction difficult. The cosmic-ray neutron probe (CRNP) can play a key role in producing data for satellite data calibration. The installation of CRNP is non-invasive, minimizing damage to the soil and vegetation environment, and has the advantage of having a spatial representative for the intermediate scale. These characteristics are advantageous to establish an observation network in Korea which has lots of mountainous areas with dense vegetation. Therefore, this study was conducted to evaluate the applicability of the CRNP soil moisture observatory in Korea as part of the establishment of a Korean cOsmic-ray Soil Moisture Observing System (KOSMOS). The CRNP observation station was installed with the Gunup-ri observation station, considering the ease of securing power and installation sites and the efficient use of other hydro-meteorological factors. In order to evaluate the CRNP soil moisture data, 12 additional in-situ soil moisture sensors were installed, and spatial representativeness was evaluated through a temporal stability analysis. The neutrons generated by CRNP were found to be about 1,087 counts per hour on average, which was lower than that of the Solmacheon observation station, indicating that the Hongcheon observation station has a more humid environment. Soil moisture was estimated through neutron correction and early-stage calibration of the observed neutron data. The CRNP soil moisture data showed a high correlation with r=0.82 and high accuracy with root mean square error=0.02 m³/m³ in validation with in-situ data, even in a short calibration period. It is expected that higher quality soil moisture data production with greater accuracy will be possible after recalibration with the accumulation of annual data reflecting seasonal patterns. These results, together with previous studies that verified the excellence of CRNP soil moisture data, suggest that high-quality soil moisture data can be produced when constructing KOSMOS.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3A
• /
• pp.201-209
• /
• 2010

Generally, PSC girder bridge uses total gross cross section to resist applied loads unlike reinforced concrete member. Also, it is used as short and middle span (less than 30 m) bridges due to advantages such as ease of design and construction, reduction of cost, and convenience of maintenance. But, due to recent increased public interests for environmental friendly and appearance appealing bridges all over the world, the demands for longer span bridges have been continuously increasing. This trend is shown not only in ordinary long span bridge types such as cable supported bridges but also in PSC girder bridges. In order to meet the increasing demands for new type of long span bridges, PSC hollow box girder with H-type steel as compression reinforcements is developed for bridge with a single span of more than 50 m. The developed PSC girder applies compressive prestressing at H-type compression reinforcements using unbonded PS tendon. The purpose of compressive prestressing is to recover plastic displacement of PSC girder after long term service by releasing the prestressing. The static test composed of 4 different stages in 3-point bending test is performed to verify safety of the bridge. First stage loading is applied until tensile cracks form. Then in second stage, the load is removed and the girder is unloaded. In third stage, after removal of loading, recovery of remaining plastic deformation is verified as the compressive prestressing is removed at H-type reinforcements. Then, in fourth stage, loading is continued until the girder fails. The experimental results showed that the first crack occurs at 1,615 kN with a corresponding displacement of 187.0 mm. The introduction of the additional compressive stress in the lower part of the girder from the removal of unbonded compressive prestressing of the H-type steel showed a capacity improvement of about 60% (7.7 mm) recovery of the residual deformation (18.7 mm) that occurred from load increase. By using prestressed H-type steel as compression reinforcements in the upper part of cross section, repair and rehabilitation of PSC girders are relatively easy, and the cost of maintenance is expected to decrease.

• Journal of Food Hygiene and Safety
• /
• v.38 no.3
• /
• pp.79-88
• /
• 2023

Trifludimoxazin is a triazinone herbicide that inhibits the synthesis of protoporphyrinogen oxidase (PPO). The lack of PPO damages the cell membranes, leading to plant cell death. An official analytical method for the safety management of trifludimoxazin is necessary because it is a newly registered herbicide in Korea. Therefore, this study aimed to develop a residual analysis method to detect trifludimoxazin in five representative agricultural products. The EN method was established as the final extraction method by comparing the recovery test and matrix effect with those of the QuEChERS method. Various sorbent agents were used to establish the clean-up method, and no differences were observed among them. MgSO₄ and PSA were selected as the final clean-up conditions. We used LC-MS/MS considering the selectivity and sensitivity of the target pesticide and analyzed the samples in the MRM mode. The recovery test results using the established analysis method and inter-laboratory validation showed a valid range of 73.5-100.7%, with a relative standard deviation and coefficient of variation less than 12.6% and 14.5%, respectively. Therefore, the presence of trifludimoxazin can be analyzed using a modified QuEChERS method, which is widely available in Korea to ensure the safety of residual insecticides.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3A
• /
• pp.297-307
• /
• 2010

Recently, maintenance engineering and technology for civil and building structures have begun to draw big attention and actually the number of structures that need to be evaluate on structural safety due to deterioration and performance degradation of structures are rapidly increasing. When stiffness is decreased because of deterioration of structures and member cracks, dynamic characteristics of structures would be changed. And it is important that the damaged areas and extent of the damage are correctly evaluated by analyzing dynamic characteristics from the actual behavior of a structure. In general, typical measurement instruments used for structure monitoring are dynamic instruments. Existing dynamic instruments are not easy to obtain reliable data when the cable connecting measurement sensors and device is long, and have uneconomical for 1 to 1 connection process between each sensor and instrument. Therefore, a method without attaching sensors to measure vibration at a long range is required. The representative applicable non-contact methods to measure the vibration of structures are laser doppler effect, a method using GPS, and image processing technique. The method using laser doppler effect shows relatively high accuracy but uneconomical while the method using GPS requires expensive equipment, and has its signal's own error and limited speed of sampling rate. But the method using image signal is simple and economical, and is proper to get vibration of inaccessible structures and dynamic characteristics. Image signals of camera instead of sensors had been recently used by many researchers. But the existing method, which records a point of a target attached on a structure and then measures vibration using image processing technique, could have relatively the limited objects of measurement. Therefore, this study conducted shaking table test and field load test to verify the validity of the method that can measure multi-point displacement responses of structures using image processing technique.

• 한국노년학
• /
• v.29 no.2
• /
• pp.629-643
• /
• 2009

The purpose of this study is, by using the demographic variables, to identify self-efficacy, social support, and quality of life of the elderly with depression and to assess the impacts of these factors upon their quality of life. By analyzing the factors which have an impact upon the life quality of the elderly with depression, this study aims to provide important information which help understand them, and to find out what kind of care is necessary for their happy and satisfactory life. The study took purposive sampling and survey of 215 people among the elderly with depression who were under care of the outpatient clinics, day hospitals, and mental health clinics located in Seoul and Kyunggi Province, Korea. This study was conducted from November 10th to 20th, 2008 and the data were collected using the questionnaires of self-efficacy, social support, and quality of life scales. Using a SPSS/WIN 15.0 program, the analysis of the data showed the following results. First, among the demographic characteristics, the elderly with depression who were male, had spouse, higher education, no public assistance, shorter period of depression, and were healthy turned out to have higher self-efficacy. In terms of social support, the participants who had higher education, no public assistance, and were healthy turned out to have more social support. Further, in terms of quality of life, the variables of spouse, public assistance, period of depression, and health condition were statistically significant. Second, as a result of hierarchical regression, it appeared that the elderly with depression, who had higher self-efficacy, more social support, spouse, good health, no public assistance, and shorter period of depression, turned out to have higher quality of life. Based on the study findings, the implications of social work practice, policy, and future research were discussed.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.5
• /
• pp.263-271
• /
• 2019

The recent phenomenon of job "Miss Match", which is inconsistent with knowledge in the demand of educational training institutes and industries, has spread to an increase in private education costs for reeducation and employment of new hires, resulting in weak individual job competency and poor employment capability, as well as economic and material waste at the national level. To compensate for these problems, the National Competency Standards(NCS), which are available immediately in practice and look for a standard point of national job competency with the aim of fostering human resources sought by industries, were developed, and even the NCS-based qualification system was launched in line with the stream of times. This study is intended to look into the importance and priority of competency units and competency unit elements at the NCS-based qualification L3 level in the skin care field for an overall check of the NCS-based qualification level at a time when educational institutes are organizing and operating the school curriculums according to the NCS and NCS-based qualification level. And it is attempted to provide basic data for the development of curriculum in fostering professional human resources required by industries. To analyze the needs for competency units and competency unit elements at the L3 level, a survey using AHP method was carried out to a group of field experts and a group of education experts. In addition, the SPSS(Statistical Package for Social Science) ver. 21.0 and Expert Choice 2000, an AHP-only solution was used to do statistical processing through the processes of data coding and data cleaning. The findings showed that there was a partial difference of opinion between a group of field experts and a group of education experts. This indicates that the inconsistencies between educational training institutes and industrial sites should be resolved at this time of change with the aim of fostering field customized human resources with professional skills. Consequently, the solution is to combine jobs at industrial sites and standardized educations of educational institutes with human resources required at industrial sites.

• 한국노년학
• /
• v.31 no.1
• /
• pp.129-141
• /
• 2011

This study aims to find out effects of a tailored occupational activity program(TOAP) on the activities of daily living(ADL), cognitive function, depressive mood, and caregiver burden, who live in the community. Method : From October 2009 to May 2010, the TOAP was applied to 15 dementia patients and 15 of their caregivers, who was visitors of the Y-city Center for Managing Dementia in Gyunggi-do. The TOAP was designed for habituating patients and caregivers to the techniques acquired through goal activities and task and making it capable of being routinized regularly. The TOAP was applied to dementia patients and their cvaregivers twice a week for 7 weeks(one-time home visit, one-time phone inspection), a total of 14 times. Results: Significant differences among pre-test and post-test were found in the AMPS motor skills(1.10±1.14 and 1.34±1.2 respectively) scores, AMPS process skills(0.32±0.55 and 0.77±0.66 respectively) scores, ACL(3.86±0.65 and 4.17±0.64 respectively) scores, MMSE-KC(17.33±4.6 and 19.33±4.97 respectively) scores, GDS(11.73±6.87 and 8.53±7.09 respectively) scores, and caregiver burden(31.80±20.06 and 26.13±18.07 respectively) scores(p<0.05). A significant effect was confirmed from the TOAP which ADL, cognitive function, reduced patient's depression and caregiver burden(p<0.05). Conclusion: From the above results that a TOAP has an effect on the improvement of the ability to ADL, cognitive function and reduced depression and caregiver burden of dementia patients living in community. The present author hopes that, in the future, more diverse community based on tailored occupational activity programs will be developed to improve the functions of dementia patients living in community.

• 한국노년학
• /
• v.39 no.2
• /
• pp.199-211
• /
• 2019

The purpose of this study is to analyze leisure satisfaction and leisure performance according to whether elderly people are performing their preferred leisure activities. For the analysis, we used sample from the 6th (2015) panal data as Korean Retirement and Income Study(KReIS). The results of this study were as follows. First, the total data of 4,197 elderly (2,212 young-old and 1,985 old-old) were analyzed. As a result, weekday and weekend leisure time of the old-old (7.64 hours / 7.81 hours) than the young-old (6.83 hour / 7.39 hour) was increased and resting activites (over 70% of watching TV and listening to the radio) accounted for more than 80% of the both elderly leisure activities. Leisure performance were higher in old-old who did not perform preferred leisure activities during weekdays. Leisure performance on weekends was higher in old-old regardless of whether they had preferred leisure time. Average of leisure performance was high in both groups and they responded leisure satisfaction was moderate. In the case of need for leisure change, young-old was higher than oid-old regardless of preference leisure performance and day of the week. However, the responses of the both groups are closed to those that do not want to change. Based on the results of this study, it should be practiced such as develomenting program and introduction of health management system considering leisure constraints to improve leisure satisfaction and continuance of leisure activities for young-old and old-old. We also emphasize the need for a systematic survey scale that takes into account the qualitative aspects of leisure activities as well as the subjective factors influencing leisure participation.

• Journal of Wetlands Research
• /
• v.25 no.4
• /
• pp.335-344
• /
• 2023

Brachydiplax chalybea flavovittata, a climate-sensitive biological indicator species, was first observed and recorded at Jeju Island in Korea in 2010. Overwintering was recently confirmed in the Yeongsan River area. This study was aimed to predict the potential distribution patterns for the larvae of B. chalybea flavovittata and to understand its ecological characteristics as well as changes of population under global climate change circumstances. Data was collected both from the Global Biodiversity Information Facility (GBIF) and by field surveys from May 2019 to May 2023. We used for the distribution model among downloaded 19 variables from the WorldClim database. MaxEnt model was adopted for the prediction of potential and future distribution for B. chalybea flavovittata. Larval distribution ranged within a region delimited by northern latitude from Jeju-si, Jeju Special Self-Governing Province (33.318096°) to Yeoju-si, Gyeonggi-do (37.366734°) and eastern longitude from Jindo-gun, Jeollanam-do (126.054925°) to Yangsan-si, Gyeongsangnam-do (129.016472°). M type (permanent rivers, streams and creeks) wetlands were the most common habitat based on the Ramsar's wetland classification system, followed by Tp type (permanent freshwater marshes and pools) (45.8%) and F type (estuarine waters) (4.2%). MaxEnt model presented that potential distribution with high inhabiting probability included Ulsan and Daegu Metropolitan City in addition to the currently discovered habitats. Applying to the future scenarios by Intergovernmental Panel on Climate Change (IPCC), it was predicted that the possible distribution area would expand in the 2050s and 2090s, covering the southern and western coastal regions, the southern Daegu metropolitan area and the eastern coastal regions in the near future. This study suggests that B. chalybea flavovittata can be used as an effective indicator species for climate changes with a monitoring of their distribution ranges. Our findings will also help to provide basic information on the conservation and management of co-existing native species.

• Journal of Wetlands Research
• /
• v.25 no.4
• /
• pp.274-283
• /
• 2023

Buffer zones, an example of nature-based solutions, offer wide range of environmental, social and economic benefits due to their multifunctionality when applied to watershed areas promoting blue-green connectivity. This study evaluated the effects of buffer zone application to the water quality of Yongdam reservoir tributaries. Particularly, the challenges and improvement of the buffer zone design were identified and suggested, respectively. Water and soil samples were collected from a total of six sites in Yongdam reservoir from September 2021 to April 2022. Water quality analyses revealed that among the sites monitored, downstream of Sangjeonmyeon Galhyeonri (SG_W_D2) was found to have the highest concentration for water quality parameters turbidity, total suspended solids (TSS), chemical oxygen demand (COD), total phosphorus (TP) and total nitrogen (TN). This finding was attributed to the algal bloom observed during the sampling conducted in September and October 2021. It was found through the soil analyses that high TN and TP concentrations were also observed in all the agricultural land uses implying that nutrient accumulation in agricultural areas are high. Highest TN concentration was found in the agricultural area of Jeongcheonmyeon Wolpyeongri (JW_S_A) followed by Jucheonmyeon Sinyangri (JS_S_A) while the lowest TN concentration was found in the original soil of Sangjeonmyeon Galhyeonri (SG_S_O). Among the types of buffer zones identified in this study, Type II-A, Type II-B and Type III were found to have blue-green connectivity. However, initially, blue-green connectivity in these buffer zone types were not considered leading to poor design and poor performance. As such, improvement in the design considering blue-green network and renovation must be considered to optimize the performance of these buffer zones. The findings in this study is useful for designing buffer zones in the future.