• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.12
• /
• pp.4027-4035
• /
• 1996

Accuracy of gas flow measurements using sonic nozzle and factors which influence on the discharge coefficients of sonic nozzle are investigated with high pressure gas flow standard measurement system. The gas flow measurement system comprises two compressors, storage tank, temperature control loop, sonic nozzle test section, weighing tank, gyroscopic scale and data acquisition system. The experiments are performed at various nozzle throat diameter and inlet pressure. Overall uncertainty of discharge coefficients is estimated to less than .+-.0.2% and most of experimental data fall into this range. Dependence of discharge coefficients on the Reynolds number is good agreement with those suggested in ISO document. The influence of swirl on the discharge coefficients becomes greater as the nozzle throat diameter is enlarged. The discharge coefficient of conical nozzle shows about 4.5% lower discharge coefficients than those of toroidal nozzle, but variation trend with Reynolds number is very similar each other and reproducibility of data is very good.

• Journal of the Society of Naval Architects of Korea
• /
• v.51 no.5
• /
• pp.396-408
• /
• 2014

In this study, uncertainty analysis based on ITTC(International Towing Tank Conference) Recommended Procedures is carried out in the towing-tank experiment for motion responses and added resistance. The experiment was conducted for KVLCC2 model in head sea condition. The heave, pitch and added resistance were measured in different wave conditions, and the measurement was repeated up to maximum 15 times in each wave condition in order to observe the uncertainty of measured data. The uncertainty analysis was carried out by adopting the ISO-GUM(International Organization for Standardization, Guide to the Expression of Uncertainty in Measurements) method recommended by ITTC. This paper describes the details about the analysis method, uncertainty and the measured uncertainty for each source. The uncertainty analysis results are summarized as a tabular form. To validate the accuracy of the present measurement, the experimental results are compared with the results of numerical computation and other experiment. From the present uncertainty analysis, the main sources of uncertainty are identified, which can be very useful to improve the accuracy for added resistance experiment.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.4
• /
• pp.56-63
• /
• 1999

The seakeeping and resistance tests of a 47.7m class catamaran are conducted in a towing tank with the 1/21.5 scale model. The effect of the trim tab on the resistance is investigated with the trim tab angle variations and the resistance and trim angle of the catamaran with the trim tab are compared with those without the trim tab. The heave and pitch motions are measured at the three full scale speeds in sea state of 3.4 and 5 and the vertical accelerations at five points on the deck are also measured. The measured accelerations are compared with the criteria of ISO 2631/3 and it is shown that the seakeeping performance of the catamaran is good.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2011.09a
• /
• pp.17-20
• /
• 2011

The International Association of Classification Societies (IACS) had developed the Common Structural Rules (CSR) for bulk carriers as per the needs noted above. ISO and IMO GBS (Goal-Based Standards) are now being developed in this regard. This study has been prepared to verity the strength of forward cargo hold of 82,000 DWT class bulk carriers. A cargo hold/tank 3-D FE model was established to assess the structural adequacy of the primary structural members with the loading conditions. Full breadth model was established for the analysis considering asymmetric nature of structural layout and loading conditions. To summarize this result of structural assessment based on IACS CRS for bulk carrier, it is benefit to design this kind of bulk carriers and to study the strength assessment for the similar type of bulk carriers.

• Journal of the Korean Society of Safety
• /
• v.26 no.4
• /
• pp.20-26
• /
• 2011

This paper is to investigate noise source for reciprocating type air compressors. The reciprocating type air compressors are widely used in the small and medium sized enterprise and many employees are affected and irritated by their noise during working. The investigation and analysis of the noise source were made according to the ISO 1680/1 and MIL-STD 7410-1 and noise evaluation of each part of compressors was made. Noise emitted from the intake and exhaust valve and the air receiver tank were dominant compared with those from other parts of compressor. Noise from the motor and the revolution of crank mechanism was negligible relatively with the noise sources as mentioned above.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.5
• /
• pp.1143-1148
• /
• 2010

We investigated the separation of nitrogen heterocyclic compound (NHC) contained in a model coal tar fraction comprising four kinds of NHC [indole (In), quinoline (Q), iso-quinoline (iQ), quinaldine (Qu)], three kinds of bicyclic aromatic compound (BAC) [1-methylnaphthalene (1MN), 2-methylnaphthalene (2MN), dimethylnaphthalene (DMN) mixture with ten structural isomers (DMNs; regarded as one component)], biphenyl (Bp) and phenyl ether (Pe) by liquid membrane permeation (LMP). A batch-stirred tank was used as the permeation unit. An aqueous solution of saponin and n-hexane were used as the liquid membrane and the outer oil phase, respectively. Yield and selectivity of individual NHC was much larger than that of BAC, Bp and Pe. Increasing the initial mass fraction of the saponin to the membrane solution ($C_{sap,0}$) and the initial volume fraction of O/W emulsion to total liquid in a stirred tank (${\phi}_{OW,0}$) resulted in deteriorating the yield of individual NHC, but increasing the stirring speed (N) resulted in improving the yield of each NHC. With increasing $C_{sap,0}$, the selectivity of each NHC based on DMNs increased. Increasing ${\phi}_{OW,0}$ and N resulted in decreasing the selectivity of individual NHC based on DMNs. At an experimental condition fixed, the sequence of the yield and selectivity in reference to DMNs for each NHC was Q > Qu = iQ > In. Furthermore, we compared LPM method with methanol extraction method in view of the separation efficiency (yield, selectivity) of NHC.

• Applied Chemistry for Engineering
• /
• v.21 no.2
• /
• pp.238-241
• /
• 2010

The purification of indole from 54.3wt% indole fraction (temperature range of distillate: $250{\sim}255^{\circ}C$) recovered by extraction-distillation combination of coal tar fraction (temperature range of distillate: $240{\sim}265^{\circ}C$) was examined by solute crystallization. The feed consists of eight components such as quinoline, iso-quinoline, indole, quinaldine, 1-methylnaphthalene, 2-methylnaphthalene, biphenyl and phenyl ether. Hexane and an aqueous solution of methanol (50 : 50 vol%) were used as the crystallization solvent and the coolant, respectively. A batch stirred tank of glass material was used as a crystallization apparatus. By increasing the operation temperature and the volume ratio of solvent to feed at initial, the purity of indole increas ed, but yields of indole showed a decreasing tendency. Solute crystallization method using hexane as a solvent was excellent because the purity of 99.3 wt% indole was recovered at the yield of 50% without washing operation.

• Fisheries and Aquatic Sciences
• /
• v.22 no.4
• /
• pp.8.1-8.9
• /
• 2019

A 12-week feeding trial was designed to evaluate the effect of total replacement of fish oil (FO) with terrestrial alternative oils on growth, feed utilization, body composition, hematological parameters, and fillet fatty acid profile of mandarin fish juveniles. Four iso-nitrogenous (56% crude protein) and iso-lipidic (13% crude lipid) practical diets were formulated. A control diet contained 6% FO and three other experimental diets were prepared by replacing FO with linseed oil, soybean oil, and lard (designed as FO, LO, SO, and lard, respectively). Each diet was randomly allocated to triplicate groups of 25 fish ($1.8{\pm}0.03g/fish$) in a circular tank. Complete replacement of FO by three tested alternative oils had no remarkable impact on growth performance, feed utilization efficiency, and morphological and hematological parameters of juvenile mandarin fish. However, daily feed intake was found to be significantly higher for fish fed the SO diet compared with those fed the FO and LO diets. Fish fed LO and SO diets exhibited significantly higher levels of the whole body lipid compared to fish fed diet containing FO. Fillet fatty acid composition reflected dietary fatty acid profile. The highest level of ${\alpha}$-linolenic acid, linoleic acid, and oleic acid was observed in fish fillet fed LO, SO, and lard, respectively. Although the eicosapentaenoic acid level of fish fillet fed diet FO was higher than other treatments, no significant difference was found in docosahexaenoic acid content among all dietary groups. The results of the present study clearly demonstrate that the complete replacement of FO in mandarin fish diets is achievable. These findings are useful in dietary formulation to reduce feed costs without compromising mandarin fish growth.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.418-421
• /
• 2003

Surfactant enhanced in-situ soil flushing was peformed to remediate the soil and groundwater at an oil contaminated site, and the effluent solution was treated by the chemical treatment process including DAF(Dissolved Air Flotation). A section from the contaminated site(4.5m$\times$4.5m$\times$6.0m) was selected for the research, which was composed of heterogeneous sandy and silt-sandy soils with average Hydraulic conductivity of 2.0$\times$10$^{-4}$ cm/sec. Two percent of sorbitan monooleate(POE 20) and 0.07% of iso-prophyl alcohol were mixed for the surfactant solution and 3 pore volumes of surfactant solution were injected to remove oil from the contaminant section. Four injection wells and two extraction wells were built in the section to flush surfactant solution. Water samples taken from extraction wells and the storage tank were analyzed by GC(gas-chromatography) for TPH concentration with different time. Five pore volumes of solution were extracted while TPH concentration in soil and groundwater at the section were below the Waste Water Discharge Limit(WWDL). Total 18.5kg of oil (TPH) was removed from the section. The concentration of heavy metals in the effluent solution also increased with the increase of TPH concentration, suggesting that the surfactant enhanced in-situ flushing be available to remove not only oil but heavy metals from contaminated sites. Results suggest that in-situ soil flushing and chemical treatment process including DAF could be a successful process to remediate contaminated sites distributed in Korea.

• Applied Chemistry for Engineering
• /
• v.25 no.2
• /
• pp.142-146
• /
• 2014

The separation of nitrogen heterocyclic compound (NHC) contained in a model coal tar fraction of nine components system was investigated by distribution equilibrium. The model coal tar fraction comprising NHC group (NHCs; indole (In), quinoline (Q), iso-quinoline (iQ), quinaldine(Qu)), bicyclic aromatic compound group (BACs; 1-methylnaphthalene (1MN), 2-methylnaphthalene (2MN), dimethylnaphthalene (DMN)), biphenyl (Bp) and phenyl ether (Pe) and the aqueous methanol were used as the raw materials and the solvent of this work, respectively. A batch-stirred tank was used as the liquid-liquid contact unit of this work. The distribution coefficient of NHCs increased by increasing the equilibrium operation temperature, whereas the selectivity of NHCs with respect to BACs decreased. Decreasing the initial volume ratio of water to the solvent resulted in deteriorating the selectivity of NHCs in reference to BACs, but improving the distribution coefficients of NHCs. At a fixed experimental condition, the sequence of the distribution coefficient and the selectivity with reference to BACs for each groups was increased in order of NHCs > Bp > BACs > Pe and NHCs > Bp> Pe, respectively. Also, the sequence of the distribution coefficient for entire compounds was in order of In > iQ = Q > Qu > Bp > 1MN = 2MN > Pe > DMN. The maximum yield of NHCs and the selectivity of NHCs based on BACs obtained by methanol extraction were 94 and 23%, respectively. Furthermore, the recovery process for NHCs from coal tar was studied by using the experimental results from this work.