• Journal of the Korea Society of Computer and Information
• /
• v.28 no.8
• /
• pp.11-19
• /
• 2023

In this paper, it is confirmed that the metrics used to evaluate image quality can be applied to low-light images. Due to the nature of low-illumination images, factors related to light create various noise patterns, and the smaller the amount of light, the more severe the noise. Therefore, in situations where it is difficult to obtain a clean image without noise, the quality of a low-illuminance image from which noise has been removed is often judged by the human eye. In this paper, noise in low-illuminance images for which ground truth cannot be obtained is removed using Noise2Noise, and spatial resolution and radial resolution are evaluated using ISO 12233 charts and colorchecker as metrics such as MTF and SNR. It can be shown that the quality of the low-illuminance image, which has been evaluated mainly for qualitative evaluation, can also be evaluated quantitatively.

• Korean Journal of Remote Sensing
• /
• v.27 no.5
• /
• pp.573-586
• /
• 2011

The MTF(modulation transfer function) is one of parameters to evaluate the performance of imaging systems. Also, it can be used to restore information that is lost by a harsh space environment (radioactivity, extreme cold/heat condition and electromagnetic field etc.), atmospheric effects and falloff of system performance etc. This paper evaluated the MTF values of images taken by DubaiSat-1 satellite which was launched in 2009 by EIAST(Emirates Institute for Advanced Science and Technology) and Satrec Initiative. Generally, the MTF was assessed using various methods such as a point source method and a knife-edge method. This paper used the slanted-edge method. The slantededge method is the ISO 12233 standard for the MTF measurement of electronic still-picture cameras. The method is adapted to estimate the MTF values of line-scanning telescopes. After assessing the MTF, we performed the MTF compensation by generating a MTF convolution kernel based on the PSF(point spread function) with image denoising to enhance the image quality.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.26 no.4
• /
• pp.365-384
• /
• 2024

The development of scanning technology is accelerating for safer and more efficient automated inspection than human-based inspection. Research on automatically detecting facility damage from images collected using computer vision technology is also increasing. The pixel size, quality, and quantity of an image can affect the performance of deep learning or image processing for automatic damage detection. This study is a basic to acquire high-quality raw image data and camera performance of a mobile tunnel scanning system for automatic detection of damage based on deep learning, and proposes a method to quantitatively evaluate image quality. A test chart was attached to a panel device capable of simulating a moving speed of 40 km/h, and an indoor test was performed using the international standard ISO 12233 method. Existing image quality evaluation methods were applied to evaluate the quality of images obtained in indoor experiments. It was determined that the shutter speed of the camera is closely related to the motion blur that occurs in the image. Modulation transfer function (MTF), one of the image quality evaluation method, can objectively evaluate image quality and was judged to be consistent with visual observation.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.1
• /
• pp.152-157
• /
• 2014

Digital still camera generally uses optical low-pass filter(OLPF) to enhance its image quality because it removes high spatial frequencies causing aliasing. However, the use of OLPF causes some loss of detail. On the other hand, when image are captured by using no OLPF, the moir$\acute{e}$ is generally existed in high spatial frequency region of an image. Therefore, in this paper, moir$\acute{e}$ reduction method in case of using no OLPF is suggested. To detect the moir$\acute{e}$, spatial frequency response(SFR) of camera was firstly analyzed by using ISO 12233 resolution chart. Then, moir$\acute{e}$ region is detected by using the patterns that are related to the SFR of camera. next, this region is analysed in the frequency domain. Then, the moir$\acute{e}$ is reduced by removing its frequency component, which represents inflection point between high frequency and DC components. Through the experimental results, it is shown that the proposed method can achieve moir$\acute{e}$ reduction with preserving the detail.

• Korean Journal of Optics and Photonics
• /
• v.26 no.2
• /
• pp.88-97
• /
• 2015

An omnidirectional optical system can be described as a special optical system that images in real time a panoramic image with an azimuthal angle of $360^{\circ}$ and the altitude angle corresponding to the upper and lower fields of view from the horizon line. In this paper, for easy fabrication and compact size, we designed and fabricated a catadioptric omnidirectional optical system consisting of the mirror part of a spherical mirror with a central hole (that is, obscuration), a plane mirror, the imaging lens part of 3 single spherical lenses, and a spherical doublet in the visible light spectrum. We evaluated its image performance by measuring the cut-off spatial frequency using automobile license plates, and the vertical field of view using an ISO 12233 chart. We achieved a catadioptric omnidirectional optical system with vertical field of view from $+53^{\circ}$ to $-17^{\circ}$ and an azimuthal angle of $360^{\circ}$. This optical system cleaniy imaged letters on a car's front license plate at the object distance of 3 meters, which corresponds to a cut-off spatial frequency of 135 lp/mm.