• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.8
• /
• pp.1120-1128
• /
• 2016

The objective of this work was to evaluate the effects of supplementation with nitrogen and starch on the nutritional performance of grazing cattle during the rainy season. Five rumen cannulated Nellore steers, averaging 211 kg of body weight (BW), were used. Animals grazed on five signal grass paddocks. Five treatments were evaluated: control (forage only), ruminal supplementation with nitrogen at 1 g of crude protein (CP)/kg BW, ruminal supplementation with starch at 2.5 g/kg BW, supplementation with nitrogen (1 g CP/kg BW) and starch (2.5 g/kg BW), and supplementation with nitrogen (1 g CP/kg BW) and a mixture of corn starch and nitrogenous compounds (2.5 g/kg BW), thereby resulting in an energy part of the supplement with 150 g CP/kg of dry matter (DM). This last treatment was considered an additional treatment. The experiment was carried out according to a $5{\times}5$ Latin square design following a $2{\times}2+1$ factorial arrangement (with or without nitrogen, with or without starch, and the additional treatment). Nitrogen supplementation did not affect (p>0.10) forage intake. Starch supplementation increased (p<0.10) total intake but did not affect (p<0.10) forage intake. There was an interaction between nitrogen and starch (p<0.10) for organic matter digestibility. Organic matter digestibility was increased only by supplying starch and nitrogen together. Nitrogen balance (NB) was increased (p<0.10) by the nitrogen supplementation as well as by starch supplementation. Despite this, even though a significant interaction was not observed (p>0.10), NB obtained with nitrogen plus starch supplementation was greater than NB obtained with either nitrogen or starch exclusive supplementation. Supplementation with starch and nitrogen to beef cattle grazing during the rainy season can possibly improve digestion and nitrogen retention in the animal.

• Journal of Korean Society of Steel Construction
• /
• v.27 no.2
• /
• pp.195-205
• /
• 2015

The rahmen bridge is well known common type of bridge in which all members are connected rigidly. The rahmen bridge is built for several situations because it has many advantages such as no need of bridge bearing system, easy of maintenance, reduction of the cross-sectional area of superstructure, and relatively low construction cost compared with other bridge types. Recently, to lengthen the span of rahmen bridge system, steel-concrete composite beam is used for superstructure of rahmen bridge instead of normal concrete girder with slab. However, member forces are increased because of extension of span length of superstructure and substructure is designed and constructed inefficiently when steel-concrete composite rahmen bridge is designed. In this study, new-type steel-concrete composite bridge is suggested. New-type steel-concrete composite rahmen bridge is adopted hinge connection between abutment and foundation for the reduction of the bending momemt at the foundation. In this study, we present the results of experiment conducted to estimate the load carrying capacity of new-type steel-concrete composite rahmen bridge and the structural characteristics of hinge connection.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.439-439
• /
• 2011

최근 이상기후로 인해 세계의 기후, 날씨가 변화하는 추세이다. 이에 따라 한국, 프랑스, 미국 등 세계 각지에서 이상홍수 및 이상가뭄이 발생하고 이로 인한 재산 및 인명피해가 빈번한 현황이다. 따라서 전 세계적으로 기후변화를 고려하여 홍수피해를 저감하고자 많은 노력을 기울이고 있으며, 그러한 방법 중에서도 특히 설계 또는 계획수립 시에 많이 사용되는 방식으로 수치해석 및 수리실험 방법을 들 수 있다. 특히, 수치해석은 수리실험에 비해 비교적 짧은 시간과 경제적인 장점이 있으므로 많이 이용되는 방법 중의 하나이다. 따라서 본 연구에서는 수치해석을 통해 프랑스 남부에 위치한 니스 지역 Var강의 역사상 가장 큰 실강우에 대하여 다양한 방식의 수치해석을 수행하고 수위 관측지점의 수위자료와 비교분석하고자 한다. 본 연구에서는 대상지역을 프랑스 남부에 위치한 니스지역의 Var강으로 선정하였다. 이 지역은 지중해성 기후에 속해 건조하고 따뜻한 날씨였지만 최근 이상기후로 인해 잦은 강우와 홍수 등이 발생하고 있다. 가장 심한 피해가 발생했던 1994년 11월에 발생한 폭우로 인하여 최대 유량이 $3,500m^3/s$까지 관측 되었으며 이는 평균 유량인 $50~100m^3/s$의 35~70배에 달하는 유량이다. 이 홍수로 인해 Var강 유역의 많은 지역이 물에 잠기고 2개의 수중구조물이 파괴되는 등 많은 피해가 발생하였다. 본 연구에서 사용된 수치모형은 미 공병단의 HEC-HMS와 상용 프로그램인 MIKE11과 ISIS이다. MIKE11과 ISIS는 1차원 수리분석모형 프로그램으로써 흐름, 속도, 유량, 수질, 유사이동 등 개수로에서 여러 수리학적 현상을 분석할 수 있는 프로그램이다. 실제 수위자료와 수치모의를 통한 결과값의 비교를 위해 GIS를 통해 얻은 유출계수, 유로경사, 소유역 분할 등을 이용하고 역사상 가장 크게 발생한 1994년의 실강우 이용하여 HEC-HMS을 통해 수문곡선을 작성한 후 동일한 매개변수를 이용하고 검 보정을 통해 MIKE11과 ISIS를 이용하여 수치모의를 실시하였고 실제 수위자료와 프로그램 MIKE11와 ISIS의 결과값을 분석 및 비교하였다. Var강 유역에서 수치모의를 한 결과, 각 프로그램을 사용한 결과값은 실제 수위자료와 비슷한 경향을 보였으며 또한 동일한 매개변수를 이용하였을 때 각 프로그램을 사용한 결과값도 유사한 경향을 보였다. 검 보정을 실시 한 후 ISIS의 결과값이 실제 수위자료와 더 흡사한 것으로 나타났다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.2
• /
• pp.21-29
• /
• 2014

This paper evaluates the shear strength, behavior and failure mode of reinforced concrete beams with deformed GFRP reinforcing bar. Four concrete beam specimens were constructed and tested. It was carried out to observe failure behavior and load-deflection of simply supported concrete beams subjected to four-point monotonic loading. In order to eliminate of the uncertainty by the shear reinforcements, any stirrups were not used. Variables of the specimens were shear span-depth ratio, effective reinforcement ratio. The dimensions of specimen is 3,300 or $1,950mm{\times}200mm{\times}240mm$. Clear span and shear span were 2,900mm, 1,000mm respectively. Shear span-depth ratios were 6.5 and 2.5. Effective ratios of Longitudinal GFRP reinforcing bar were $1.126{\rho}_{fb}$, $2.250{\rho}_{fb}$, $3.375{\rho}_{fb}$ and $0.634{\rho}_{fb}$. All beam specimens were broken by diagonal-tension shear and the ACI 440.1R, CSA S806 and ISIS, which was used to design test beams, showed considerable deviation between prediction and test results of shear strengths.

• Journal of the Korea Concrete Institute
• /
• v.20 no.2
• /
• pp.185-191
• /
• 2008

To fundamentally solve the problem of deterioration of concrete structures, it has been researched that the high durable concrete structure reinforced with the FRP rebar can be one of major solution to the newly-developed concrete structure. FRP rebar has lots of advantages such as non-corrosive, high performance and light weight against the conventional steel rebar. Among these kinds of FRP rebars, GFRP rebar has usually been considered as the best reinforcement because of its economic point of view. Even though the material capacity of the GFRP rebar was already investigated, there are some problems such as low modulus of elastic that will be cause for degrade of the serviceability of flexural concrete member reinforced with the GFRP rebar. Thus, the deflection characteristics of the GFRP rebar reinforced concrete structure should be considered then investigated. In this study, ACI 440 guideline (2003), ISIS Canada Design Manual (2001) and Toutanji et al. (2000) was considered for predicting the moment of inertia of the concrete beam reinforced with the GFRP rebar. And it was also evaluated that load-deflection relationship had a good accordance with the test and analysis result. In the result of this study, it could be estimated that the load-deflection relationship using the suggested equation of moment of inertia in this study indicated better accordance with the test result than that of the others until failure.