• Korean Journal of Materials Research
• /
• v.19 no.3
• /
• pp.119-124
• /
• 2009

In the microelectronics packaging industry, the adhesion strength between Cu and polyimide and the thermal stability are very important factors, as they influence the performance and reliability of the device. The three different buffer layers of Cr, 50%Cr-50%Ni, and Ni were adopted in a Cu/buffer layer/polyimide system and compared in terms of their adhesion strength and thermal stability at a temperature of $300^{\circ}C$ for 24hrs. A 90-degree peel test and XPS analysis revealed that both the peel strength and thermal stability decreased in the order of the Cr, 50%Cr-50%Ni and Ni buffer layer. The XPS analysis revealed that Cu can diffuse through the thin Ni buffer layer ($200{\AA}$), resulting in a decrease in the adhesion strength when the Cu/buffer layer/polyimide multilayer is heat-treated at a temperature of $300^{\circ}C$ for 24hrs. In contrast, Cu did not diffuse through the Cr buffer layer under the same heat-treatment conditions.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.5 no.1
• /
• pp.33-36
• /
• 1985

This experiment was carried out to investigate the effect of crown density of trees on the growth and yield of cool-season grasses in forest. The species used in this study was orchard-grass (Dactylis glomerata L.) and 4 levels of tree crown density(O=full sunlight, 25, 50 and 75%) were treated. The experiment was performed at the experimental filed of the Livestock Experiment Station in Suweon, during 1979 to 1950. The results obtained are summarized as follows: 1. Maximum leaf area was obtained at 25% crown density of trees, followed by 0, 50 and 75%, regardless of cutting times. 2. Plant height tended to increase as the crown density of trees increased. However, there was no difference between 0% and 25% crown density of trees. 3. There was a negative correlation between plant height and leaf area of orchardgrass grown under pine trees. 4. The more dry matter yield of orchardgrass was obtained at 25% crown density of trees (p<0.05), follwed by 0, 50 and 75%, respectively. However, there was no significant difference between 0% and 50% crown density of trees. Therefore it is suggested that the critical level of crown density of trees is 50% to culture of cool-season grasses in forest.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.6
• /
• pp.654-661
• /
• 2018

This paper analyzes the type of facilities and equipment of the marina port and analyzes its lift facilities (lift pier) and equipment (marine mobile lift). It set up the lift facilities and equipment standards. Depending on the gross tonnage of vessels in operation in Korea, the required inner width of lift piers is 5.50 m for 35-ton vessels, and 6.20 m for 50-ton vessels. The inside width of the marine mobile lift is 6.10 m for 35-ton vessels, and 6.80 m for 50-ton vessels. There are two places where the target ship can be lifted from the lift pier installed on the domestic marina, and other marinas' lift piers inner widths are insufficient by about 0.35 ~ 0.50 m. Among the marine mobile lifts in operation, there were two apparatuses that secured the inside width necessary to lift the target vessel. Other marine mobile lifts' inner widths are insufficient by about 0.3 ~ 0.6 m.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.4
• /
• pp.679-687
• /
• 2014

In this study, a new paint which is able to resist the cavitation erosion is tried to be developed by using urethane added with nano particles such as multi-wall and single-wall carbon nano tube and spherical and fiber type graphite. The new paint synthesized was characterized with physical properties and resistivity to cavitation erosion($t_{50}$). Among nano particles, fiber type graphite($t_{50}$ 292min) showed high hardness and wear resistance compared with spherical type($t_{50}$ 182min). For carbon nano tube, single-wall type($t_{50}$ 286min) was higher than multi-wall type in wear resistance. Fiber-type graphite was the best nano-particle for paint with resistivity to cavitation erosion. In the application test of paint, the manually painted sample showed surface with smooth but the surface of sample prepared with spray was not smooth. During spray, dust was fixed on the surface.

• Korean Journal of Food Science and Technology
• /
• v.50 no.3
• /
• pp.344-348
• /
• 2018

We investigated the application of functional materials by examining a variety of physiological activities of Abelmoschus esculentus extract. A. esculentus extract had a low cytotoxicity against murine melanoma B16F10 cells. At concentrations showing little or no cytotoxicity, A. esculentus extract showed high a DPPH radical scavenging activity ($ID_{50}$, $5.24{\mu}g/mL$), inhibited tyrosinase activity ($ID_{50}$, $102.12{\mu}g/mL$), and decreased melanin content ($ID_{50}$, $17.85{\mu}g/mL$). The treatment of B16F10 cells with A. esculentus extract suppressed the protein expression of tyrosinase in a dose-dependent manner. These findings suggest that A. esculentus extract inhibits melanin synthesis in murine melanoma B16F10 cells by suppressing intracellular tyrosinase expression, as well as directly inhibits tyrosinase activity simultaneously. Additionally, A. esculentus extract promotes the expression of involucrin, which is related to skin barrier protection. These results indicate that A. esculentus extract is an appropriate material for improving skin barrier function.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.3
• /
• pp.111-119
• /
• 2024

The purpose of study is to analyze the effect of population inflow on apartment price growth. For this purpose, proxy for population structure is employed: (i) net population inflow based on 'resident registration criteria', (ii) buyer's transaction. The major findings are as followed. First, net population inflow of total and 50 over gives no significant effects on the apartment price growth in Seoul and Jeju. However, there are significant and positive effects of 50s and 60s in Seoul, and 60s in Jeju on the apartment price growth, respectively. Second, buyer's transactions of 'total and 50 over' give positive effect on apartment price growth only in Seoul. However, 60s and 50s of buyers' transaction give positive effect on the apartment price growth both in Seoul and Jeju. This study implies that more detailed population inflow like age group provide more meaningful information to the study on apartment price growth.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.513-516
• /
• 2004

The purpose of this study is to investigate properties of porous concrete according to volume of binder and compaction energy. The result of this study, as compaction energy goes on increasing, the actual measured void ratio is decreased according as a change of compaction energy and volume of binder. The compaction energy has a very near value by target void ratio on the whole when it is $50kN{\cdot}m/m^2,\;50\~75kN{\cdot}m/m^2$ in case of target void ratio is $15\%\;and\;25\%$. As compaction energy goes on increasing, compressive strength of specimens picked up when target void ratio is $20\%\;and\;25\%$. Also, compressive strength of specimens bluntly picked up when compaction energy is over $50\~75kN{\cdot}m/m^2$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.262-262
• /
• 2012

A multi-purpose cyclotron, MC50 has been operated to provide multi-ions of proton, deuteron and alpha at Korea Institute of Radiological and Medical Sciences (KIRAMS). Neutron is also produced through the (p,n) nuclear process with a Be target. However, a wide spectrum of current of ions is requested by beam users for carrying their various application fields. Therefore a simulation study is requested on the design of an axial injection system for high current proton and alpha beam extraction for radio-isotope productions and scientific researches. The purpose of this study is seeking a relatively simple method for the MC50 having higher alpha beam capability and also improving proton and deuteron beams currently used. We are considering two possibilities to improve the internal ion source and to install a new external axial injection system. The external injection system will be consisted of an Einzel lens, a steering magnet, a buncher, and a glazer lens placed in front of an inflector, which is located at the center of the main magnet.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.10a
• /
• pp.247-252
• /
• 2001

Recently the steel parts used at automobiles are required to be used under high stress more than ever before in need of the weight down. To achieve this requirement of a high strength steel, it must be necessary to decrease inclusion content and surface defect as like decarburization, surface roughness etc.. In this study, the surface conditions are measured to know the influence on fatigue properties by two cases of shot peening of two-stage shot peening and single-stage shot peening. And for this study, two kinds of spring steel (SUP7, 50CrV4) are used. This study shows the outstanding improvement of fatigue properties at the case of two-stage shot peening in the rotary bending fatigue test and this is assumed to be from on low stress condition, the 1st stage shot peening is not affected by nonmetallic inclusion under metal. it is possible that the 2nd stage shot peening increases the fatigue life and the high stress but that is affected by nonmetallic inclusion under metal. so far beeasily 50CrV4 have made high stress. But, results also show fatigue failures originated at inclusion near surface, and this inclusion type is turned out to be a alumina of high hardness.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.3
• /
• pp.93-99
• /
• 2001

Recently the steel parts used at automobils are required to be used under high stress more than ever before in need of the weight down. To achieve this requirement of a high strength steel, it must be necessary to decrease inclusion content and surface defect as like decarburization, surface roughness etc.. In this study, the surface conditions are measured to know the influence on fatigue properties by two cases of shot peening of two-stage shot peening and single-stage shot peening. And for this study, two kinds of spring steel (SAE 9254, DIN50CrV4) are used. This study shows the outstanding improvement of fatigue properties at the case of two-stage shot peening in the rotary bending fatigue test and this is assumed to be from (1) on low stress condition, th 1st stage shot peening is not affected by nonmetallic inclusion under metal.(2) it is possible that the 2nd stage shot peening increases the fatigue life and the high stress but that is affected by nonmetallic inclusion under metal. (3) so far beeasily DIN50CrV4 have made high stress. But, results also show fatigue failures originated at inclusion near surface, and this inclusion type is turned out to be a alumina of high hardness.