• Archives of Pharmacal Research
• /
• v.25 no.5
• /
• pp.697-703
• /
• 2002

We investigated that the role of nitric oxide (NO) on ischemic rats in brain and heart. Ischemia was induced by both common carotid arteries (CCA) occlusion for 24h following reperfusion. Then tissue samples were removed and measured NOx. In brain, NOx was increased by about 40% vs. normal and it was significantly inhibited by aminoguanidine, selective iNOS inhibitor. This result showed that NOx concentration was increased by iNOS. We investigated the role of $Ca^{2+}$ during ischemia. Nimodipine, L-type calcium channel blocker, didn't inhibit the increases of NOx concentration during ischemia. It suggested that increased NOx was due to calcium-independent NOS. MK-801, which N-methyl-D-aspartate (NMDA) receptor antagonist, didn't significantly prevent the increases of NOx. In heart, ischemia caused NOx decrease and it is inconsistent with NOx increase in brain. Aminoguanidine and nimodipine didnt affect on NOx decrease. But MK-801 more lowered NOx concentration than those of ischemia control group. It seemed that $Ca^{2+}$ influx in heart partially occurred via NMDA receptor and inhibited by NMDA receptor antagonist. The mean arterial pressure (MAP) in ischemic rats after 24h of CCA occlusion was decreased when compared to normal value, whereas the heart rates (HR) was not different between two groups. Aminoguanidine or MK801 had no effect on MAP or HR, but nimodipine reduced MAP. There was no difference the effects of aminoguanidine, nimodipine, or MK-801, on MAP and HR between normal rats and ischemic rats. In summary, ischemic model caused an increase of NOx concentration, suggesting that this may be produced via iNOS, which is calcium independent in brain. However in heart, ischemia decreased NOx concentration and NMDA receptor was partially involved. The basal MAP was decreased in ischemic rats but HR was not different from normal control, suggesting that increased NOx in brain of ischemic rat may result in the hypotension.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.3
• /
• pp.801-809
• /
• 2013

We investigate sensitivity and limit of detection (LOD) of trace copper (Cu) metal using pristine carbon nanotube (CNT) and acidified CNT (ACNT) electrodes. Squarewave based anodic stripping voltammetry (SWASV) is used to determine the stripped Cu concentration. Prior to performing the SWASV measurements, its optimal conditions are determined and with that, effects of potential scan rate and $Cu^{2+}$ concentration on stripping current are evaluated. The measurements indicate that (1) ACNT electrode shows better results than CNT electrode and (2) stripping is controlled by surface reaction. In the given $Cu^{2+}$ concentration range of 25-150 ppb, peak stripping current has linearity with $Cu^{2+}$ concentration. Quantitatively, sensitivity and LOD of Cu in ACNT electrode are 9.36 ${\mu}A\;{\mu}M^{-1}$ and 3 ppb, while their values are 3.99 ${\mu}A\;{\mu}M^{-1}$ and 3 ppb with CNT electrode. We evaluate the effect of three different water solutions (deionized water, tap water and river water) on stripping current and the confirm types of water don't affect the sensitivity of Cu. It turns out by optical inspection and cyclic voltammetry that superiority of ACNT electrode to CNT electrode is attributed to exfoliation of CNT bundles and improved interfacial adhesion occurring during oxidation of CNTs.

• Smart Structures and Systems
• /
• v.18 no.4
• /
• pp.801-818
• /
• 2016

To estimate structural displacement, a visually servoed paired structured light system (ViSP) was proposed in previous studies. The ViSP is composed of two sides facing each other, each with one or two laser pointers, a 2-DOF manipulator, a camera, and a screen. By calculating the positions of the laser beams projected onto the screens and rotation angles of the manipulators, relative 6-DOF displacement between two sides can be estimated. Although the performance of the system has been verified through various simulations and experimental tests, it has a limitation that the accuracy of the displacement measurement depends on the alignment of the laser pointers. In deriving the kinematic equation of the ViSP, the laser pointers were assumed to be installed perfectly normal to the same side screen. In reality, however, this is very difficult to achieve due to installation errors. In other words, the pose of laser pointers should be calibrated carefully before measuring the displacement. To calibrate the initial pose of the laser pointers, a specially designed jig device is made and employed. Experimental tests have been performed to validate the performance of the proposed calibration method and the results show that the estimated displacement with the initial pose calibration increases the accuracy of the 6-DOF displacement estimation.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.11
• /
• pp.801-808
• /
• 2020

The purpose of the study is to find the factors that influence the financial leverage of Vietnam firms. The dependent variable is the financial leverage and the independent variables are firm size, asset structure, liquidity, growth opportunities, profitability, and firm age. The data are collected from Vietnam firms' annual financial reports in the period from 2010 to 2019. The study uses a sample of 448 Vietnam listed firms in the period. We also employ a panel regression model with pooled OLS and fixed effect to analyze the firms' financial data. The results of the model showed that financial leverage (FL) has a negative relationship with some factors such as asset structure (AS), liquidity (LQ), growth opportunities (GRW), profitability (ROA), and firm age (AGE) in the fixed effect regression. It means that when liquidity, profitability, and firm age increase, firms' financial leverage will decrease. While firms' financial leverage has still a positive relationship with the firm size (SIZE) in the model. As a result, when firm size increases, financial leverage will increase, too. The results showed that models are fit for the research and can be used to predict future findings. It is also useful for enterprises, financial advisors, investors, as well as the financial managers.

• Journal of Environmental Science International
• /
• v.22 no.7
• /
• pp.801-810
• /
• 2013

To improve the physical and chemical properties of the soil and increasing water-retaining property of the soil, Superabsorbent synthetic polymeric materials have been used. The experiment carried out from April to July 2012 after the influence evaluation of Superabsorbent synthetic polymeric materials to vines plant. The result shows that the study of Hedera japonica Tobler, the growth and the survival rates rank as media > hydroponic > superabsorbent synthetic polymers, and the growth and the survival rates are considerably pessimistic in the experiment of hydroponic and superabsorbent synthetic polymers. In the study of Trachelospermum asiaticum var. intermedium, the growth and the survival rates rank as hydroponic > media > superabsorbent synthetic polymers, the difference between the experiment of hydroponic and is very small and the survival rates are not very good in the experiment of superabsorbent synthetic polymers. In the study of Euonymus fortunei var. radicans Rehder,it is insignificantly difference among the different of planting based. Judging from these results, the differences are depending on the species of plants. The thesis holds that the characteristics of plant should be considered in plant cultivation and soil improvement in the future, and it is desirable to use the appropriate mixing ratio of soil in soil improvement as well.

• Structural Engineering and Mechanics
• /
• v.44 no.6
• /
• pp.801-814
• /
• 2012

The strain rate effects on the interaction between a Mode I matrix crack and an inclined elliptic matrix-inclusion interface under dynamic tensile loadings were investigated numerically, and the results are in agreement with previous experimental data. It is found, for a given material system, that there are the first and the second critical strain rates, by which three kinds of the subsequent crack growth patterns can be classified in turn with the increasing strain rate, namely, the crack deflection, the double crack mode and the perpendicular crack penetration. Moreover, such a crack deflection/penetration behavior is found to be dependent on the relative interfacial strength, the inclined angle and the inclusion size. In addition, it is shown that the so-called strain rate effect on the dynamic strength of granule composites can be induced directly from the structural dynamic response of materials, not be entirely an intrinsic material property.

• The Korean Journal of Physiology and Pharmacology
• /
• v.2 no.3
• /
• pp.279-286
• /
• 1998

It has been well documented that transient forebrain global ischemia causes selective neuronal degeneration in hippocampal CA1 pyramidal neurons with a delay of a few days. The mechanism of this delayed hippocampal CA1 pyramidal neuronal death (DND) is still controversial. To delineate the mechanisms of the DND, the effects of treatment with MK-801, an NMDA receptor antagonist, kynurenic acid, a NMDA/non-NMDA receptor antagonist, and/or cycloheximide, a protein synthesis inhibitor, on the DND were investigated in male Wistar rats. To examine the participation of apoptotic neuronal death in the DND, TUNEL staining was performed in ischemic brain section. Global ischemia was induced by 4-vessel occlusion for 20 min. All animals in this study showed the DND 3 and 7 days after the ischemic insult. The DND that occured 3 days and 7 days after the ischemia were not affected by pretreatment with MK-801 (1 mg/kg), but markedly attenuated by the pretreatment with kynurenic acid (500 mg/kg). Treatment with cycloheximide (1 mg/kg) also markedly inhibited the DND. The magnitudes of attenuation by the two drugs were similar. The magnitude of attenuation by co-treatments with kynurenic acid and cycloheximide was not greater than that with any single treatment. TUNEL staining was negative in the sections obtained 1 or 2 days after the ischemic insults, but it was positive at hippocampal CA1 pyramidal cells in sections collected 3 days after the ischemia. These results suggested that the DND should be mediated by the activation of non-NMDA receptor, not by the activation of NMDA receptor and that the activation of AMPA receptor should induce the apoptotic process in the DND.

• Bulletin of the Korean Mathematical Society
• /
• v.38 no.4
• /
• pp.797-801
• /
• 2001

The purpose of this paper is to give an upper bound for A[n,4], the maximum number of codewords in a binary code of word length n with minimum distance 4 between codewords. We have improved upper bound for A[12k+11,4]. In this correspondence we prove $A[23,4]\leq173716$.

• Bulletin of the Korean Mathematical Society
• /
• v.51 no.3
• /
• pp.789-801
• /
• 2014

In this paper, we study the existence of ground state solutions for a class of non-resonant cooperative elliptic systems by a variant weak linking theorem. Here the classical Ambrosetti-Rabinowitz superquadratic condition is replaced by a general super quadratic condition.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.04b
• /
• pp.147-151
• /
• 2000

This paper presents the electrochemical etch-stop characteristics of single-crystal silicon in a tetramethyl ammonium hyciroxide(TMAH):isopropyl alcohol(IPA):pyrazine solution. Addition of pyrazine to a TMAH:IPA etchant increases the etch-rate of (100) silicon, thus the elapsed time for etch-stop was shortened. The current-voltage(I-V) characteristics of n- and p-type silicon in a TMAH:IPA:pyrazine solution were obtained, respectively. Open circuit potential(OCP) and passivation potential(PP) of n- and p-type silicon, respectively, were obtained and applied potential was selected between n- and p-type silicon PP. The electrochemical etch-stop is applied to the fabrication of 801 microdiaphragms having $20\;{\mu}m$ thickness on a 5-inch silicon wafer. The averge thicknesses of 801 microdiaphragms fabricated on the one wafer were $20.03\;{\mu}m$ and standard deviation was ${\pm}0.26{\mu}m$. The silicon surface of the etch-stopped microdiaphragm was extremely flat without noticeable taper or other nonuniformities. The benefits of the electrochemical etch-stop in a TMAH:IPA:pyrazine solution become apparent when reproducibility in the microdiaphragm thickness for mass production is considered. These results indicate that the electrochemical etch-stop in a TMAH:IPA:pyrazine solution provides a powerful and versatile alternative process for fabricating high-yield silicon microdiaphragms.