• Earthquakes and Structures
• /
• 제8권3호
• /
• pp.681-697
• /
• 2015

Iran as one of the countries located on the Alpine-Himalayan seismic belt has recently experienced a few number of catastrophic earthquakes. A well-known index of how buildings are affected by earthquakes is through assessment of probable Peak Ground Acceleration (PGA) and structures' response spectra. In this research, active faults around Kerman and Birjand, two major cities in eastern parts of Iran, have been considered. Seismic catalogues are gathered to categorize effects of surrounding faults on seismicity of the region. These catalogues were further refined with respect to time and space based on Knopoff-Gardner algorithm in order to increase statistical independency of events. Probabilistic Seismic Hazard Analysis (PSHA) has been estimated for each of cities regarding 50, 100, 200 and 500 years of structures' effective life-span. These results subsequently have been compared with Deterministic Seismic Hazard Analysis (DSHA). It has been observed that DSHA not necessarily suggests upper bound of PSHA results. Furthermore, based on spectral Ground Motion Prediction Equations (GMPEs), Uniform Hazard Spectra (UHS) and spectral acceleration were provided for 2% and 10% levels of probability of exceedance. The results show that increasing source-to-site distance leads to spectral acceleration reduction regarding each fault. In addition, the spectral acceleration rate of variation would increase if the source-to-site distance decreases.

• Parasites, Hosts and Diseases
• /
• 제45권2호
• /
• pp.129-132
• /
• 2007

The geographical distribution and ecological preferences of Haemaphysalis in domestic animals in Iran were studied 4 times a year from April 2003 to March 2005. A total of 1,622 ixodid tick specimens were collected from 3 different zones. Among them, 108 (6.7%) Haemaphysalis ticks, consisting of 6 species, were identified; H. punctata (3.4%), H. parva (0.5%), H. sulcata (0.6%), H. choldokovskyi (1.7%), H. concinna (0.06%) and Haemaphysalis sp. (0.6%). H. punctata was the most abundant species, whereas H. concinna was the rarest species collected in humid and sub-humid zones on cattle, sheep and goats. H. choldokovskyi was principally collected from sheep and goats grazed in cold mountainous areas. The infested areas consisted of Caspian Sea (Guilan, Mazandaran, Golestan, and central provinces), mountainous (Azarbaiejan, Ardebil, Kohgilouyeh, and Kordestan) and semi-dessert (Khorasan, Semnan, Herman, Sistan, and Baluchestan) zones. The Caspian Sea zone (23.6%) was the most highly infested region. The results show that various species of Haemaphysalis ticks infest domestic ruminants in Iran and each tick species show characteristic geographical distributions.

• Structural Engineering and Mechanics
• /
• 제47권1호
• /
• pp.119-129
• /
• 2013

Nonlinear Static Procedures (NSPs) have been developed as a practical tool to estimate the seismic demand of structures. Several researches have accomplished to minimize errors of NSPs, namely pushover procedures, in the Nonlinear Time History Analysis (NTHA), as the most exact method. The most important issue in a typical pushover procedure is the pattern and technique of loading which are extracted based on structural dynamic fundamentals. In this paper, the coefficients of modal force combination is focused involving a meta-heuristic optimization algorithm to find the optimum load pattern which results in a response with minimum amount of errors in comparison to the NTHA counterpart. Other parameters of the problem are based on the FEMA recommendations for pushover analysis of building structures. The proposed approach is implemented on a high-rise 20 storey concrete moment resisting frame under three earthquake records. In order to demonstrate the effectiveness and robustness of the studied procedure the results are presented beside other well-known pushover methods such as MPA and the FEMA procedures, and the results show the efficiency of the proposed load patterns.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권5호
• /
• pp.617-626
• /
• 2021

The study examines the existence of twin deficit in two emerging economies (Turkey and Iran) and also investigates the relation of twin deficit with specific macroeconomic indicators such as the GDP, money supply, foreign direct investment, and the interest rate both in short and long-run periods. The twin-deficit concept refers to a situation where the current account deficit and budget deficits exist in the same corresponding period of an economy. This study employs the Bound Test Autoregressive lag distributed (ARDL) model on time-series quarterly secondary data of Turkey and Iran from 1992 to 2019. The stationarity of variables has been ensured through the Augmented Dickey-Fuller (ADF) test at the level and the first difference. The results reveal the existence of a twin deficit in both the short and long-run periods only in Iran. Its existence could not be observed in the Turkish economy. The findings suggest a positive relationship between twin deficit and GDP, and a negative relationship between twin deficit and FDI and M2. At the same time, the relationship of the twin deficit with interest rate could not be found in the Iranian economy. The findings may be helpful for economic managers of both countries in executing their economic policies.

• ETRI Journal
• /
• 제40권6호
• /
• pp.759-773
• /
• 2018

Uncore components such as on-chip memory systems and on-chip interconnects consume a large amount of energy in emerging embedded applications. Few studies have focused on next-generation analytical models for future chip-multiprocessors (CMPs) that simultaneously consider the impacts of the power consumption of core and uncore components. In this paper, we propose a convex-optimization approach to design heterogeneous uncore architectures for embedded CMPs. Our convex approach optimizes the number and placement of memory banks with different technologies on the memory layer. In parallel with hybrid memory architecting, optimizing the number and placement of through silicon vias as a viable solution in building three-dimensional (3D) CMPs is another important target of the proposed approach. Experimental results show that the proposed method outperforms 3D CMP designs with hybrid and traditional memory architectures in terms of both energy delay products (EDPs) and performance parameters. The proposed method improves the EDPs by an average of about 43% compared with SRAM design. In addition, it improves the throughput by about 7% compared with dynamic RAM (DRAM) design.

• Structural Engineering and Mechanics
• /
• 제83권2호
• /
• pp.195-206
• /
• 2022

Significant structural damages due to earthquakes reveal the importance of seismic design provisions. This paper presents a comparison between the seismic design provisions of Albania, Croatia, Iran, and Turkey for the design of mid-rise reinforced-concrete (RC) frames. Information on the historical development of the considered provisions are given. The code provisions are compared, illustrating the main differences in the minimum requirements for column and beam detailing and analysis for mid-rise RC frames. 4-story, 5-story, and 6-story buildings are designed according to each design code, and their performance is evaluated comparatively by using a displacement-based adaptive pushover procedure and eigenvalue analysis. It is observed that recent Turkish code has the highest and Albanian code has the lowest level of requirements in terms of member size and reinforcement detailing. The considered models indicate 15%, 20% and 50%, lower period values than the Croatia, Iran and Albania buildings, respectively. Additionally, building models per Croatia, Iran and Albania codes have 30%, 35% and 65% less base shear capacity when compared to Turkish building codes. Building models per Croatia and Iran codes indicate similar properties both in terms of strength and stiffness.

• Advances in Computational Design
• /
• 제7권2호
• /
• pp.153-171
• /
• 2022

The present study aimed to find a way to create forms that can simultaneously meet several architectural requirements by applying generative design methods specifically focused on cellular automata. In other words, it is tried to find various forms of architecture that all have common features. Because of the useful features of cellular automata, we decided to use it to generate various forms, but make a relation between the discrete nature of cellular automata and the continuous nature of architecture, was the major problem of our project. To achieve this goal, three consecutive stages were designed. In the first stage, independent variables including the location of the building, the height of the building, and the building area were considered as the inputs of the model. In the second stage, after locating the building, the building's main shell was designed as a hidden geometry for the cellular automata and then the cellular automata were determined based on this shell. The main result of this research is establishing a logical relationship between the discrete geometry of the cellular automata and the continuous search space such that it creates various optimized forms. Although we specify the site plan of this project at Iran-Tehran, this research can be generalized to various design sites as well as different projects, allowing the architectsto alter the cell dimensions, cell density, etc., based on their opinion and project needs.

• Advances in nano research
• /
• 제12권3호
• /
• pp.253-261
• /
• 2022

Numerical modelling of an integrated Carbon NanoTube (CNT) membrane is only achievable if probable deformations and realistic alterations from a perfect CNT membrane are taken into account. Considering the possible forms of CNTs, bending is one of the most probable deformations in these high aspect ratio nanostructures. Hence, investigation of effect associated with bent CNTs are of great interest. In the present study, molecular dynamics simulation is utilized to investigate fluid flow dynamics in deformed CNT membranes, specifically when the tube cross section is not affected. Bending in armchair (5,5) CNT was simulated using Tersoff potential, prior to flow rate investigation. Also, to study effect of inclined entry of the CNT to the membrane wall, argon flow through generated inclined CNT membranes is examined. The results show significant variation in both cases, which can be interpreted as counter-intuitive, since the cross section of the CNT was not deformed in either case. The distribution of fluid-fluid and fluid-wall interaction potential is investigated to explain the anomalous behavior of the flow rate versus bending angle.

• Clinical and Experimental Vaccine Research
• /
• 제12권1호
• /
• pp.1-12
• /
• 2023

Widespread public vaccination is one of the effective mechanisms to ensure the health and prevent deaths in societies. The coronavirus disease 2019 (COVID-19) vaccine is a stark instance in this regard. Vaccine development is a complex process requiring firm-level capabilities, various infrastructures, long-term planning, and stable and efficient policies. Due to the global demand for vaccines during the pandemic, the national capability to produce vaccines is critical. To this end, the current paper investigates influential factors, at the firm- and policylevel, in the COVID-19 vaccine development process in Iran. By adopting a qualitative research method and conducting 17 semi-structured interviews and analyzing policy documents, news, and reports, we extracted internal and external factors affecting the success and failure of a vaccine development project. We also discuss the characteristics of the vaccine ecosystem and the gradual maturity of policies. This paper draws lessons for vaccine development in developing countries at both firm and policy levels.

• 식물병연구
• /
• 제30권1호
• /
• pp.50-59
• /
• 2024

Charcoal rot disease, caused by the fungus Macrophomina phaseolina, is one of the most important diseases of Sesame (Sesamum indicum) all over the world. However, the population biology of M. phaseolina is poorly understood. In this study, M. phaseolina isolates from five different regions of Iran (Khuzestan, Fars, Bushehr, Hormozgan, and Kohgiluyeh & Boyer-Ahmad provinces) (n=200) were analyzed for genetic variation using inter simple sequence repeats marker. In total, 152 unique haplotypes were identified among the 200 M. phaseolina isolates, and gene diversity (H=0.46-0.84) and genotypic diversity were high in each of the regions. The structure analysis clustered five Iranian populations into two distinct groups, the individuals from group 1 were assigned to the Bushehr population and the individuals from Khuzestan, Fars, Hormozgan and Kohgiluyeh & Boyer-Ahmad were aggregated and formed group 2. The results matched with genetic differentiation and gene flow among regions. Analyses of the distribution of gene diversity within and among five Iranian populations were 61% and 39%, respectively. Our results showed that infected seeds are thought to be the dominant mechanism responsible for the spreading of the pathogen in southern parts of Iran. In summary, it is essential to have local quarantine and prevent seed exchanges between geographical populations to restrict the dispersal of pathogen over long distances and provide certified seeds in Iran.