• Journal of the Korean Wood Science and Technology
• /
• v.35 no.3
• /
• pp.36-44
• /
• 2007

The purpose of this study was to investigate thermal stability, reactivity, and bonding strength of existing epoxy resin mixed with the epoxidized soybean oil (ESBO) in order to use soybean oil economically. In the dry shear test, the marked strengths showed $30.5kgf/cm^2$ at the ratio of ESBO to epoxy resin 9 : 1 and $6.2kgf/cm^2$ at the ratio 8 : 2. The bonding strengths of the others, except mixing ratios 2 : 8 and 1 : 9, exceeded the requirement of Korean plywood standard of $7.0kgf/cm^2$. In the wet shear test, the result was $5.8kgf/cm^2$ at the ratio 9 : 1. There were no thickness swelling and moisture absorption in the water resistance of the film. The value of activation energy, Tg (${\Delta}E$), by DSC analysis showed between $110^{\circ}C$ and $120^{\circ}C$ through all ratios. Epoxy in the epoxy resin fully reacted with the hardener (TETA), but it is difficult to decide that epoxys in the ESBO were reacted directly with the hardener from FT-IR analysis. As the mixing ratio of ESBO increased, the thermal stabilities dropped from TGA analysis. From the comprehensive view on the results of above experiments, it could be confirmed through experiments that the ESBO in the mixed adhesive of epoxy resin/ESBO played a role as an extending agent level of epoxy adhesive, and we were able to know that in order to utilize ESBO as an adhesive, a study should be performed on the condition of hardening, inducible of the hardening reaction.

• Korean Journal of Environmental Agriculture
• /
• v.28 no.2
• /
• pp.158-164
• /
• 2009

Biosorption uses adsorbents derived from non-living biomass and removes toxic metals from industrial wastewater. The objective of this research was to evaluate the potential of low cost biosorbents to remove heavy metal ions (Cd, Cu, Pb and Zn) from aqueous solutions using chemically modified rice husk and saw dust (Pseudotsuga menziesi, Quercus, Populus). Batch-type adsorption experiments were carried out using rice husk and saw dust treated with NaOH and/or tartaric acid in artificial wastewater 100 mg metal/L). The experimental results showed that the adsorption specificity of each biosorbent was Pb > Cu > Cd > Zn irrespective of the types of biosorbents. The adsorption capacity of Pb and Cu onto NaOH-treated sawdust was increased 2${\sim}$3 times compared to the untreated one. In addition, the tartaric acid treatment increased the adsorption capacity of rice husk for Zn and Cd approximately 5${\sim}$10 fold compared to the untreated one. Surface conditions and changes in functional groups by chemical modification of each biosorbent were confirmed by SEM and FT-IR. Overall, the results show that chemical modification increases the metal removal capacity of rice bran and sawdust.

• Korean Journal of Soil Science and Fertilizer
• /
• v.16 no.3
• /
• pp.210-222
• /
• 1983

The chemical factors of topsoil, which are associated with the prediction models of urea nitrogen (N kg/ha) need under the concept of multinutrient factor balance in soil to maintain optimum nutrient balance in rice plant grown in flooded condition, were the x/z and the Kas/Kai values. In the prediction model or equation $NRe=(58.5+0.647x/z){\cdot}F$, the F was difined as the productivity factor, which was considered to be dependent on the variety, climate and soil, and found to be better estimated as the function of Kas/Kai rather than x/z from the equation Fb=0.65+1.086kas/kai, where the x, z, Kas and Kai, respectively, were available $SiO_2$ ppm, % organic matter, K activity ratio or exchangeable $K^+/(\sqrt{Ca+Mg}+Na^+)$ in topsoil and the ideal K activity ratio determined by the equation Kai=0.03+0.00083x/z for standard variety Jinheung. The relative K activity ratio or Kas/kai in topsoil, which have to be equal to 1.0 in the prediction of K fertilizer need for standard Japonica Variety Jinheung, found to be 1.63 for the varieties of Indica ${\times}$ Japonica or Milyang No. 23 grown in Korean condition and 0.322 for the Indica varieties of IR 8, 20, 36 and 42 gown in the Philippines condition. The ideal K activity rations for different Varieties such as Indies ${\times}$ Japonica grown in Korea or $Kai_1$ and Indica grown in the Philippines or $Kai_2$ were computed to be estimated from the following equations respectively ; $\\Kai_1=0.0489+0.001353X/Z\\Kai_2=0.01+0.000267X/Z$.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1108-1118
• /
• 2019

The purpose of this study was to examine the effects of aerobic and resistance exercise of different intensity on anti-diabetic and lipid profile improvement in type 2 diabetic mice. C57BL/6 mice were divided into six groups (n=8, in each group): normal group (Normal), type 2 diabetes (DM), type 2 diabetes+VO₂max 50% aerobic exercise group (DM50A), type 2 diabetes+VO₂max 75% aerobic exercise group (DM75A), type 2 diabetes+1RM 50% resistance exercise group (DM50R), and type 2 diabetes+1RM 75% resistance group (DM75R). DM50A and DM75A were subjected to treadmill exercise 40 min/day, 5 days/week, during 8 weeks (DM50A, at the speed of 8 m/min for 1-4 weeks and 8~10 m/min for 5-8 weeks; DM75A, 12 m/min for 1-4 weeks and 12~14 m/min for 5-8weeks). DM50R (1RM50%) and DM75R (1RM75%) were subjected to ladder-climbing exercise with weights secured to their tails, 8 set/day, 5 days/week, during 8 weeks. After 8 weeks of exercise, fasting blood glucose and HOMA-IR was significantly lower in DM group than in DM group. HbA1c showed significantly lower DM50R and DM75R groups than DM group. HDL-C showed the highest level in DM75A group and triglyceride was lowest in DM75R group. The cardiovascular risk index was lowest in the Normal and DM75A groups. Therefore, moderate intensity exercise in T2DM mice showed better improvement in blood glucose and insulin resistance control, and moderate intensity aerobic exercise was effective in reducing the cardiovascular risk index by increasing HDL-C levels.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.1
• /
• pp.11-17
• /
• 2003

As a pan of a study on effective use of seafood processing by-products, such as cuttle bone as a calcium source, we examined on the kind of organic acid (acetic acid and lactic acid), reaction concentration (mole ratio of calcium to mole of organic acid), reaction temperature $(20\~60^{\circ}C)$ and reaction time (6$\~$24 hours) as reaction conditions for the solubility improvement of cuttle bone powder. The high soluble cuttle bone powder was also prepared from the optimal reaction conditions and partially characterized. From the results on examination of reaction conditions, the high soluble cuttle bone powder was prepared with 0.4 in mole ratio of a calcium to mole of a acetic acid at room temperature for 12 hours, Judging from the patterns of IR and X-ray diffraction, the main component of the high soluble cuttle bone powder was presented as a form of calcium acetate, and a scanning electron micrograph showed an irregular form. The soluble calcium content in the high soluble cuttle bone powder was $5.3\%$ and it was improved about 1,380 times compared to a raw cuttle bone powder. For the effective use of the high soluble cuttle bone powder as a material for a functional improvement in processing, it should be used after the calcium treatment at room temperature for about 1 hour in tap water or distilled water. from these results, we concluded that it is possible to use the high soluble cut시e bone powder as a material for a functional improvement in processing.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.3
• /
• pp.194-203
• /
• 2012

1-Ethyl-3-methylimidazolium acetate known as efficient biomass pretreatment reagent was used for the extraction of lignin from rigida pine wood (pitch pine), which was called to ionic liquid lignin (ILL), and chemical structural features of ILL were compared with the corresponding milled wood lignin (MWL). The amounts of phenolic hydroxyl groups (Phe-OH) was determined to 10.0% for ILL and 7.2% for MWL, respectively, where those of methoxyl groups (OMe) were 4.9% for ILL and 11.0% for MWL, respectively. The weight average molecular weight (Mw) of ILL (3,995) were determined to ca. 1/2 of that of MWL (8,438) and polydispersity index (PDI: Mw/Mn) suggested that the lignin fragments were more uniform in the ILL (PDI 1.36) than in the MWL (PDI 2.64). The temperature (Tm) corresponding to maximum decomposition rate (Vm) of ILL ($306.6^{\circ}C$) was ca. $35^{\circ}C$ lower than that of MWL ($341.9^{\circ}C$), suggesting that ILL was thermally unstable than MWL, as evidence from the lower Tm for ILL. Moreover, the structural characteristics of ILL and MWL were confirmed by spectroscopic analyses (FT-IR and $^{13}C$-NMR), and these results indicated ionic liquid (1-ethyl-3-methylimidazolium acetate) was chemically or physically bound to ILL.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.1
• /
• pp.169-178
• /
• 1998

The crystal phases precipitated in various compositions glass of CaO-$SiO_2-P_2O_5$ system, were identified by XRD. E composition (CaO 49.4, $SiO_2\;36.8,\;P_2O_5$ 8.8 wt%) glass in which both apatite(($Ca_{10}(PO_4)_6O$ and $\beta$-wollastonite($CaSiO_3$) crystals would precipitate by heating, was selected as an experimental composition to prepare the glass ceramics with high bending strength and good bioactivity to the living bone. Glass powders of E composition were unidirectionally crystallized at $1050^{\circ}$C in the temperature-gadient furnace and the resultant glass ceramics were characterized. Bending strength of the glass ceramics was also measured. To investigate the bond forming ability between the glass ceramics and living bone tissue, soaking test of glass ceramics in simulated body fluid was carried out. Densed glass ceramics composed of apatite and $\beta$-wollastonite crystal were prepared by unidirectional crystallization under the optimum conditions. (2 0 2) plane of $\beta$-wollastonite crystals tended to grow perpendicularly to the crystallization direction. Average bending strength of this glass ceramics was 186.9 MPa, higher than that of the glass ceramics prepared by isothermal (not directional) crystallization In soaking test, a thin layer of apatite crystallite was formed on surface of the glass ceramics in 3 days. Apatite crystals formed on the glass ceramics could be act a role to make the chemical bond between the glass ceramics and living bone tissue.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.11
• /
• pp.1385-1390
• /
• 2007

Anticarcinogenic-active compound was isolated and purified from Angelica gigas Nakai. The compound was identified as decursin ($C_{19}H_{20}O_5$; molecular weight 328) by mass, IR spectrophotometry $^1H-NMR$ and $^{13}C-NMR$. The proliferation decreased in a dose dependant fashion in the MCF-7 cells treated with decursin for 24 hours over the concentration of $20{\mu}g/mL$. The $IC_{50}$ value of the decursin treatment for 24 hours were 31.04, 33.60, 27,24, $20.45{\mu}g/mL$ in the SW480, 293, HepG2 and MCF-7 cells, respectively, The growth inhibitory effect was stronger in the MCF-7 cells compared to other cells including 293 of human normal cells. The chromatin condensation, apoptotic body formation and DNA fragmentation were examined in the cells treated with decursin. These results suggest that decursin from Angelica gigas Nakai inhibited the growth through apoptosis in MCF-7 cells.

• Microbiology and Biotechnology Letters
• /
• v.26 no.2
• /
• pp.137-142
• /
• 1998

Helicobacter pylori is a Gram-negative bacterium which causes chronic gastritis and is associated with gastric ulcer, duodenal ulcer and gastric carcinoma. In the process of screening of antibacterial activities against H. pylori from soil microorganisms, fungus No. 60686 was isolated. After fermentation of No.60686, the antibacterial compound was isolated, purified and followed by extraction of mycelium with organic solvents, acetone and ethyl acetate, through silica gel chromatography, LH-20 gel chromatography and HPLC. As a result of the structural analyses of the compound by IR, $^1$H- and $^{13}$C-NMR, FAB/Mass spectrophotometer, the compound having the antimicrobial activity was identified as chaetoglobosin A ($C_{32}H_{36}N_2O_5$), a cytochalasan derivative. The antimicrobial activity of chaetoglobosin A was tested against Gram-positive and negative bacteria by paper disk method. Among the test strains of 9 Gram-positive bacteria and 18 Gram-negative bacteria containing 4 H. pylori strains, the growth of 4 H. pylori strains and 3 S. aureus strains (SG 511, 285 and 503) was only inhibited by chaetoglobosin A. Also it was shown that its growth inhibition against H. pylori strains was stronger than that against S. aureus strains at the treatment of the same concentration. Therefore it was concluded that chaetoglobosin A has a specific growth inhibition against H. pylori of the tested bacteria.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.9
• /
• pp.931-935
• /
• 2012

In this study, we fabricate and investigate low-temperature solid oxide fuel cells with a ceramic substrate/porous metal/ceramic/porous metal structure. To realize low-temperature operation in solid oxide fuel cells, the membrane should be fabricated to have a thickness of the order of a few hundreds nanometers to minimize IR loss. Yttrium-doped barium zirconate (BYZ), a proton conductor, was used as the electrolyte. We deposited a 350-nm-thick Pt (anode) layer on a porous substrate by sputter deposition. We also deposited a 1-${\mu}m$-thick BYZ layer on the Pt anode using pulsed laser deposition (PLD). Finally, we deposited a 200-nm-thick Pt (cathode) layer on the BYZ electrolyte by sputter deposition. The open circuit voltage (OCV) is 0.806 V, and the maximum power density is 11.9 mW/$cm^2$ at $350^{\circ}C$. Even though a fully dense electrolyte is deposited via PLD, a cross-sectional transmission electron microscopy (TEM) image reveals many voids and defects.