• Journal of dental hygiene science
• /
• v.8 no.3
• /
• pp.109-115
• /
• 2008

Two t-amines, N,N-dimethylaniline (MA), N,N-dimethyl-p-toluidine (MPT), were investigated as new visible light amine initiators for a dental resin composite of UDMA in order to improve photopolymerization effect. Three t-amines mixed with three photosensitizers, camphorquinone(CQ), 1-phenyl-1,2-propane dione(PD) and diacetyl (DA), respectively. And then this mixtures are added to resin monomer, UDMA. Photopolymerization efficiency of UDMA was studied through the use of FT-IR absorption spectroscopy. The photopolymerization effect of amine initiators were compared with that of 4-(dimethylamino)ethyl methacrylate (AEM), the most widely used photoinitiator. The photopolymerization efficiency of UDMA containing the amine initiator increased with irradiation time. The relative polymerization efficiency containing the CQ photosensitizer increase was in the order: AEM < MPT < MA. And the relative polymerization efficiency containing the PD photosensitizer increase was in the order: MPT < AEM < MA. This result shows that MA is most efficient amine initiator with CQ and PD.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.1
• /
• pp.20-22
• /
• 1999

The effect of dopant and stoichiometry on the physical and optical properties of $LiNbO_{3}$ were studied. We prepared three samples, undoped, MgO doped $LiNbO_{3}$ with congruent composition and near-stoichiometric $LiNbO_{3}$. Dielectric constant and transmittance in UV/VIS/IR light range were measured. The results showed that the features for high [Li]/[Nb] were similar to those for low [Li]/[Nb] but with high [Mg].

• New & Renewable Energy
• /
• v.16 no.3
• /
• pp.1-12
• /
• 2020

Shingled technology is the latest cell interconnection technology developed in the photovoltaic (PV) industry due to its reduced resistance loss, low-cost, and innovative electrically conductive adhesive (ECA). There are several advantages associated with shingled technology to develop cell to module (CTM) such as the module area enlargement, low processing temperature, and interconnection; these advantages further improves the energy yield capacity. This review paper provides valuable insight into CTM loss when cells are interconnected by shingled technology to form modules. The fill factor (FF) had improved, further reducing electrical power loss compared to the conventional module interconnection technology. The commercial PV module technology was mainly focused on different performance parameters; the module maximum power point (Pmpp), and module efficiency. The module was then subjected to anti-reflection (AR) coating and encapsulant material to absorb infrared (IR) and ultraviolet (UV) light, which can increase the overall efficiency of the shingled module by up to 24.4%. Module fabrication by shingled interconnection technology uses EGaIn paste; this enables further increases in output power under standard test conditions. Previous research has demonstrated that a total module output power of approximately 400 Wp may be achieved using shingled technology and CTM loss may be reduced to 0.03%, alongside the low cost of fabrication.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.6
• /
• pp.8-14
• /
• 2001

MetalHalid lamps have good efficiency, good color rendition and good focusing capability. But the shortcoming of metalhalid lamps is blown as acoustic resonance phenomena in the arc tube. Such acoustic resonance produce annoying fluctuations in the intensity and distribution of the emitted light, they can raise the voltage to the point where the arc is extinguished and they can move the arc close enough to the wall to cause local overheating and tube cracking. The objective of this research is to reduce acoustic resonance in the arc tube of the Pulse Start MetaIHaide lamp(MH200[W]). To reduce the acoustic resonance phenomena the electronic ballast was designed for high frequency operation with the constant frequency sinusoidal wave of 89[kHz] in the 84.6[kHz]∼94.2[kHz] range. Experimental results show that the acoustic resonance phenomena are not in the arc tube of Pulse Start MetalHalide lamp (MH200[W]) .

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.6
• /
• pp.176-183
• /
• 2002

Plasma Display Panel(PDP) is a type of flat panel display utilizing the light emission produced by gas discharge. Barrier Ribs of PDP separating each sub-pixel prevents optical and electrical crosstalks from adjacent sub-pixels. The mold for forming the barrier ribs has been newly researched to overcome the disadvantages of conventional manufacturing processes such as screen printing, sand-blasting and photosensitive glass methods. The mold for PDP barrier ribs have stripes of micro grooves transferring glass-material wall. In this paper , Stripes of grooves of which width 48$\mu$m, depth 124$\mu$m , pitch 274$\mu$m was acquired by machining of single crystal silicon with dicing saw blade. Maximum roughness of the bottom of the grooves was 59.6 nm Ra in grooving Si. Barrier ribs were farmed with silicone rubber mold, which is transferred from grooved Si forming hard mold. Silicone rubber mold has the elasticity, which enable to accommodate the waviness of lower glass plate of PDP. The methods assisted by the microwave and UV was adopted for reducing the forming time of glass paste.

• Korean Journal of Materials Research
• /
• v.20 no.11
• /
• pp.600-605
• /
• 2010

In order to meet the requirements of faster speed and higher packing density for devices in the field of semiconductor manufacturing, the development of Cu/Low k device material is explored for use in multi-layer interconnection. SiOC(-H) thin films containing alkylgroup are considered the most promising among all the other low k candidate materials for Cu interconnection, which materials are intended to replace conventional Al wiring. Their promising character is due to their thermal and mechanical properties, which are superior to those of organic materials such as porous $SiO_2$, SiOF, polyimides, and poly (arylene ether). SiOC(-H) thin films containing alkylgroup are generally prepared by PECVD method using trimethoxysilane as precursor. Nano voids in the film originating from the sterichindrance of alkylgroup lower the dielectric constant of the film. In this study, methyltriphenylsilane containing bulky substitute was prepared and characterized by using NMR, single-crystal X-ray, GC-MS, GPC, FT-IR and TGA analyses. Solid-state NMR is utilized to investigate the insoluble samples and the chemical shift of $^{29}Si$. X-ray single crystal results confirm that methyltriphenylsilane is composed of one Si molecule, three phenyl rings and one methyl molecule. When methyltriphenylsilane decomposes, it produces radicals such as phenyl, diphenyl, phenylsilane, diphenylsilane, triphenylsilane, etc. From the analytical data, methyltriphenylsilane was found to be very efficient as a CVD or PECVD precursor.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.11
• /
• pp.1706-1712
• /
• 2006

Because of the need for new antimicrobial substances with novel mechanisms of action, we report here the use of an Acinetobacter reporter system for high-throughput screening of active antimicrobial agents. The bioreporter Acinetobacter strain DF4/PUTK2 carrying luciferase genes luxCDABE was chosen because of its ecological importance and it is widespread in nature. This bioreporter is genetically engineered to emit light constitutively that can be measured in real time by luminometry. Hence, this reporter system was employed to determine the bacteriostatic actions of spent-culture supernatants derived from twelve bacterial isolates. Out of the results, the strongest bioluminescence inhibitory effect of the supernatants was recorded with Bacillus cereus strain BAC (S5). Subsequently, ethyl acetate extracts of extracellular products of strain BAC (S5) were separated by a thin-layer chromatography (TLC). Based on the bioluminescence inhibitory assay, three fractions were found to have antimicrobial activity. One fraction (C) having the strongest antimicrobial activity was further purified using TLC and characterized by IR, $^1H$ NMR, mass spectrometry, SDS-PAGE, and amino acid composition analysis. The results predicted the presence of 2-pyrrolidone-S-carboxylic acid (PCA) and the octadeconic-acid-like fatty acid. Fraction C also demonstrated a broad inhibitory activity on several Gram-negative and Gram-positive bacteria. In conclusion, the Acinetobacter reporter system shows great potential to be a reliable, sensitive, and real-time indicator of the bacteriostatic actions of the antimicrobial agents.

• Journal of Animal Science and Technology
• /
• v.59 no.10
• /
• pp.21.1-21.6
• /
• 2017

Background: The aim of the study is to evaluate the effectiveness of thermographic monitoring, using the temperature changes of perianal and perivulvar areas for the determination of estrus in Anatolian Shepherd bitches. Fifteen bitches were used in the study. Blood and vaginal smear samples were collected and thermographic monitoring of perianal and perivulvar areas were carried out starting from proestrus to early diestrus. Also, external signs of estrus were investigated. Smear samples were evaluated by light microscopy after Diff-Quik staining method and superficial and keratinized superficial cells were determined as percentage (S + KS%). Progesterone and luteinizing hormone measurements were done by radioimmunoassay. The difference in temperature between perianal and perivulvar areas was evaluated through thermographic images by FLIR ResearchIR Software. Results: According to the results obtained from the study, differences between progesterone and S + KS% were statistically significant (P < 0,05). Although temperature showed increase and decrease with progesterone and S + KS%, the differences were not important statistically (P > 0,05). Serum luteinizing hormone levels did not sign any difference (P > 0,05). Conclusions: As a result, thermographic monitoring alone is not enough for estrus detection in Anatolian Shepherd bitches. However, it can be used to assist the actual estrus detection technique in terms of providing some foreknowledge by evaluating the differences in temperature.

• Korean Journal of Human Ecology
• /
• v.21 no.5
• /
• pp.989-1004
• /
• 2012

The purpose of this study was to investigate the characteristics of the pigment and the dyeability of juniperus chinensis needles, berry, bark and heartwood extracts using distilled water, methanol, normal butanol and ethyl acetate as a solvent. Ultraviolet-visible absorption spectrum bands of the extracts were measured at around 280nm to 320nm in all the solvent extracts. The maximum absorption wavelength was able to determine tannin. All the solvent extracts except for distilled water extracts were able to confirm the presence of chlorophyll. Infrared absorption spectra (FT-IR) of all parts of the extracts showed broad absorption bands of OH due to phenolic-OH, benzene CH peak of phenol chemical structure, ether-based stretching vibration peak and the peak of flavonoid compounds that appeared in all the solvent extracts. The yield of juniper needles and heartwood in distilled water and methanol extraction were effective. Extraction of berry yields in distilled water was also effective. The yield of ethanol extraction from the bark showed better efficiency. As a result of using distilled water for the dye solution, the color of the fabrics dyed with all extracts of the needles and Y series berries generally showed light Y progression with a strong red tinge. By using a mixture of 20% ethanol and 80% distilled water for the dye solution, the color of the fabrics dyed with needles and berry extracts showed Y series dominantly. The color of the fabrics dyed with Bark and heartwood extracts were dominantly R series.

• Journal of Korean Physical Therapy Science
• /
• v.12 no.4
• /
• pp.43-55
• /
• 2005

This study was performed to investigate the effects of low-power Helium Neon Infra Red(He-Ne IR)laser irradiation and exercise on the regeneration of experimentally cut sciatic nerve in rats. The thrity Sprague-Dawley adult mail rats were assigned to the 6 groups : normal group(1), injured control groups(2), experimental groups(3). There was made artificial injured in the sciatic nerve of rats the each experimental laser group and exercise group were treated from 3 days after being injured for the 5 minutes(laser group), 10 minutes(exercise group), and 15 minutes(exercise and laser group) everyday during 2 weeks. There were measured the changes of amplitude of compound muscle action potential and histological change by the light microscopy on the sciatic nerve injured rats. The results obtained as follows : 1. In the control groups, the regeneration were slowly and slightlly progressed to compared with the experimental groups. Inflammation were much more observed, and fibrous adhesion was also observed around the sutured region of the cut sciatic nerve. 2. The amplitude of compound muscle action potential in the experimental groups were significantly increased to the injured control groups at 1 week(p<.05). The compound muscle action potential of the exercise and lased group was significantly decreased to be similar to normal group at 2 weeks(p<.05). 3. In histologic finding, in the experimental groups were observed the proliferation of the schwann cells, the infiltration of inflammatory cells and the extent of destruction at adjacent tissue were remarkably decreased on the 2 weeks. From these experimental results, it may be suggested that the laser and exercise were effected the heeling process of peripheral nerve injuried rats.