• Bulletin of the Korean Chemical Society
• /
• v.35 no.12
• /
• pp.3601-3608
• /
• 2014

RGB light emitting ZnSe based nanocrystals: ZnSe (blue), ZnSe:Cu (green) and ZnSe:Mn (red) were synthesized by capping the surface of the nanocrystals with oleic acid. The obtained nanocrystal powders were characterized by using XRD, HR-TEM, ICP-AES, FT-IR, and FT-Raman spectroscopies. The optical properties were also measured by UV/Vis and photoluminescence (PL) spectroscopies. The PL spectra showed broad emission peaks at 471 nm (ZnSe), 530 nm (ZnSe:Cu) and 665 nm (ZnSe:Mn), with relative PL efficiencies in the range of 0.7% to 5.1% compared to a reference organic dye standard. The measured average particle sizes from the HR-TEM images for those three nanocrystals were 4.5 nm on average, which were also supported well by the Debye-Scherrer calculations. The elemental compositions of the ZnSe based nanocrystals were determined by ICP-AES analyses. Finally, the drawn CIE diagram showed the color coordinates of (0.15, 0.16) for ZnSe, (0.22, 0.57) for ZnSe:Cu, and (0.62, 0.35) for ZnSe:Mn respectively, which were fairly well matched to that of the RGB color standards.

• Fashion & Textile Research Journal
• /
• v.3 no.2
• /
• pp.162-167
• /
• 2001

The dyeing powder drawn out from Cinnamoum cassia by water was concentrated. Using this powder, the silk fabrics were dyed and they measured with the K/S value, surface color, dye fastness and antimicrobial properties. The colorant of Cinnamoum cassia was proved flavonoids by FT-IR spectrum. The K/S values of silk by mordants concentration were much higher than those of high-concentration, the color yield of the silk fabrics were most efficient the premordanting method. The surface colors on the dyed fabric depended heavily upon mordants used or mordanting methods. For all cases, the value of the dyed fabric was generally dark except AI-mordant. The chroma produced clear for the unmordanting, the color difference was distinct when using the Fe-mordant. The color fastness was significantly improved when mordants were added. In the case of the light fastness, Cu-mordants improved more than 1-2 level. The Cu-mordant showed the greatest antimicrobial activity on the silk fabric.

• Korean Membrane Journal
• /
• v.8 no.1
• /
• pp.67-73
• /
• 2006

Transparent materials are well known but preparation of transparent poly 2-hydroxyethyl methacrylate {poly (HEMA)} material by varying solvent is a new one and economically reliable. This material is prepared from hydroxyl based monomer HEMA by radical polymerization using benzoyl peroxide (BPO) as initiator and isobutanol, 2-butanol, 1-butanol, hexane and toluene as a solvent. The reaction temperature, time and stirring speed were set at $70^{\circ}C$, 4 hrs and 150 rpm, respectively. The polymer was characterized for functional group by IR spectroscopy. It was observed that the intensity of band at $1637 cm^{-1}$ a characteristic band of C=C stretching disappeared indicating that it was completely consumed after polymerization. It was observed that swelling percentage increases with increase as time passes but after a certain time a constant swelling percentage is achieved. SEM pictures reveals that poly (HEMA) prepared by different solvent shows pore with a distinguishable void up to several micrometers. The BET surface area, cumulative pore volume and average pore diameter is greater in poly (HEMA) prepared by hexane as a solvent compared to other solvents. Poly (HEMA) prepared by 1-butanol as a solvent shows higher glass transition temperature compared to other solvents. Poly (HEMA) prepared by different solvents shows $90{\sim}94%$ light transmission property from light transmission measurement and looks transparent.

• Textile Coloration and Finishing
• /
• v.16 no.1
• /
• pp.34-39
• /
• 2004

Dyeing properties of Glycyrrhizae Radix was investigated with silk fabrics. Dyeing water is a type of chalcone, it showed yellow in IR spectrum. K/S value showed high in following conditions; Glycyrrhizae Radix $200g/1\ell4 water, $80^{\circ}$ of dyeing temperature, 90 minute of dyeing time. Glycyrrhizae Radix dyeing water has higher K/S value in alkalinity(pH9) than in neutrality(pH7) or acidity(pH3) conditions. K/S value showed highest in pH5 premordant method of alkalinity dyeing water condition. The color of silk fabric dyed with Glycyrrhizae Radix is yellow. The change of color did not show by mordant treatment. K/S value showed higher in mordant treatment than nonmordant. Light fastness showed over 3 degree in nonmordant, premordant, simmordant(Al,Cu,Fe) and postmordant(Cu). Water fastness showed over 3 degree in dyeing water(pH3, pH5, pH7). Dry cleaning fastness showed over 3 degree in all dyeing methods. Washing fastness is showed in 2-3 degree; Al in nonmordant, premordant, simmordant and Cu in simmordant are 2-3 degree. Perspiration fastness is nearly 3-4 degree in premordant and simmordant. Perspiration fastness shows high in premordant, simmordant than postmordant. The fastness of light, water, dry cleaning, washing, perspiration shows better nonmordant, premordant, simmordant than postmordant method.

• Textile Coloration and Finishing
• /
• v.23 no.2
• /
• pp.76-82
• /
• 2011

Ultra High molecular weight polyethylene(UHMWPE) films were photooxidized by UV/ozone irradiation. Reflectance of the irradiated films decreased in the low wavelength regions of visible light, indicating destructive interference of visible light due to roughened surface. The UV treatment developed the nano-scale roughness on the UHMWPE films surface, which increased by two-fold from 82.6 to 156.6nm in terms of peak-valley roughness. The UV irradiation caused the oxygen content of the UHMWPE film surface to increase. Water contact angle decreased from $83.2^{\circ}$ to $72.9^{\circ}$ and surface energy increased from 37.8 to 42.6mJ/$m^2$ with increasing UV energy. The surface energy change was attributed to significant contribution of polar component rather than nonpolar component indicating surface photooxidation of UHMWPE films. The increased dyeability to cationic dyes may be due to the photochemically introduced anionic and dipolar dyeing sites on the film surfaces.

• Journal of Sensor Science and Technology
• /
• v.14 no.4
• /
• pp.244-249
• /
• 2005

In this study, radiation sensor tips are fabricated for remote sensing of X or gamma ray with inorganic scintillators and plastic optical fiber. The visible range of light from the inorganic scintillator that is generated by radiation source is guided by the plastic optical fiber and is measured by optical detector and power-meter. Two kinds of sensor tips are designed and fabricated such as film type and powder type. Many kinds of inorganic scintillators are used to fabricate both sensor tips, and the different wavelength of emitting lights from them are measured to determine the optimal inorganic scintillator which has maximum light output. As a radiation source X-ray generator and Ir-192 are selected to test a performance of sensor tip. It is expected that the fiber-optic radiation sensor is widely used in nuclear industry and medical applications due to its special characteristics such as good flexibility, easy in processing, long lengths and no interference to electro magnetic field.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05b
• /
• pp.8-11
• /
• 2003

We propose that when combustible burn with contain carbon, introduce fire detector with sensor of private-use detectable light energy as infrared and ultraviolet in energy of electromagnetic-wave type radiate from flame, method for correct discrimination to resemble fire produce false alarm of detector such as sun light, hot object radiation, are welding. This research using infrared sensor is pyroelectric infrared sensor based black body radiation theory. Ultraviolet sensor is uv Tron using gas multiplication effect to current discharge and photoelectric effect of metal. To have high sensibility and to gain proper output voltage, it has high responsive performance. This research introduced UV/IR compound type flame detector and proposed method of false alarm reduced to resemble fire. The result propres the prevention and extinction of fire technique degree, certificated operation of detector.

• Korean Journal of Materials Research
• /
• v.28 no.2
• /
• pp.124-128
• /
• 2018

N-type porous silicon (PS) layers and thermally oxidized PS layers have been characterized by various measuring techniques such as photoluminescence (PL), Raman spectroscopy, IR, HRSEM and transmittance measurements. The top surface of PS layer shows a stronger photoluminescence peak than its bottom part, and this is ascribed to the difference in number of fine silicon particles of 2~3 nm in diameter. Observed characteristics of PL spectra are explained in terms of microstructures in the n-type PS layers. Common features for both p-type and n-type PS layers are as follows: the parts which can emit visible photoluminescence are not amorphous, but crystalline, and such parts are composed of nanocrystallites of several nm's whose orientations are slightly different from Si substrate, and such fine silicon particles absorb much hydrogen atoms near the surfaces. Light emission is strongly dependent on such fine silicon particles. Photoluminescence is due to charge carrier confinement in such three dimensional structure (sponge-like structure). Characteristics of visible light emission from n-type PS can be explained in terms of modification of band structure accompanied by bandgap widening and localized levels in bandstructure. It is also shown that hydrogen and oxygen atoms existing on residual silicon parts play an important role on emission stability.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.10
• /
• pp.2935-2940
• /
• 2014

Monodispersed $Bi_2O_2CO_3$ nanoplates with an average width of 320 nm and thicknesses of 50-90 nm were successfully synthesized by a simple solvothermal method in a mixture solution of polyethylene glycol and $H_2O$. The obtained nanoplates were characterized by means of XRD, FT-IR, SEM and TEM. The effect of surfactant sodium dodecyl benzene sulfonate on the morphology of $Bi_2O_2CO_3$ product was investigated. Under simulated solar light irradiation, $Bi_2O_2CO_3$ nanoplates exhibited superior photocatalytic activities towards the degradation of RhB as well as high chemical stability upon cycling photocatalytic test. The nanoplates also showed promising photodegradation ability for eliminating refractory pollutant of phenol. The excellent photocatalytic performance of $Bi_2O_2CO_3$ nanoplates as compared with P25-$TiO_2$ endows them as promising high efficiency photocatalysts.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.427-428
• /
• 2008

New high efficiency green light emitting phosphorescent devices with emission layers of [TCTA/TCTA:TAZ/TAZ]:Ir$(ppy)_3$ have been fabricated and evaluated in this paper. Among the devices having different thicknesses of TCTA:TAZ mixed layer in the total 300$\AA$-thick host of TCTA(80$\AA$)/TCTA:TAZ (50~100$\AA$)/TAZ, the device with host of TCTA(80$\AA$)/TCTA:TAZ(90$\AA$)/TAZ(130$\AA$) showed the best electroluminescent characteristics with the current density of 95 mA/$cm^2$ and luminance of 25,000 cd/$m^2$ at an applied voltage of 10V. The maximum current efficiency was 52 cd/A under the luminance of 400 cd/$m^2$.