• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권6호
• /
• pp.269-277
• /
• 2005

In this paper, designs of an Interior Permanent Magnet Synchronous Motor (IPMSM) and its motor driver for 42V automotive air condition system are introduced. The characteristics of the IPMSM are predicted by using d-q equivalent circuit having the parameters, such as current phase angle, d-q axis inductances, core loss resistance, etc. The experimental and analysis results of the prototype are compared to show validity of the analysis method, and to give analyzed characteristics in detail. As the result, an improved IPMSM is designed to widen the operating speed limit of prototype; a cost effective AC drive are considered at the same time.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1120-1123
• /
• 2003

This paper is proposed a ANN-based rotor position and speed estimation method for IPMSM by measuring the currents. Because the proposed estimator treats the estimated motor speed as the weights, it is possible to estimate motor speed to adapt back propagation algorithm with 2 layered neural network. The proposed control algorithm is applied to IPMSM drive system. The operating characteristics controlled by neural networks control are examined in detail.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1582-1591
• /
• 2014

This paper presents a hybrid sensorless control for an interior permanent magnet synchronous motor (IPMSM) for zero-, low-, and high-speed regions. Many sensorless control methods such as an observer-based estimator have been introduced. However, most of the observer-based estimators have a disadvantage at start-up and in the low-speed region. To solve this problem, a simple strategy of using a hybrid system is proposed by integrating a high-frequency (HF) signal injection method and a full-order flux observer. In addition, an HF signal injection method with only a low pass filter (LPF) is proposed to simplify the hybrid system. The hybrid system achieves high-performance drive throughout the entire speed range. The effectiveness of the proposed hybrid technique is verified by experiments using an 11-kW IPMSM drive system.

• 조명전기설비학회논문지
• /
• 제29권10호
• /
• pp.47-53
• /
• 2015

IPMSM(Insert Permanent Magnet Synchronous Motor) is a very high degree of freedom in the design according to the permanent magnet insertion position. And the performance of IPMSM is affected a lot on barrier shape which determines the magnetic flux path from magnet. Thus the position of permanent magnet and the barrier shape has to be designed by considering both specification and operation condition. In the paper, the permanent magnet and barrier shape which is suitable for direct drive motor of washing machine has been studied. In addition, in order to verify the validity of the study, the test was evaluated by making a prototype motor.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1376-1382
• /
• 2010

The propulsion Motor system has changed from the DC motor system to the induction motor system. Although the induction motor system has almost reached the stage of maturity, this system also need changed to the IPMSM system for direct drive without reduction gear. Thus, the IPMSM(Interior buried Permanent magnet synchronous Motor) has been adopted to meet the driving specification. In this paper, loss characteristic analysis of IPMSM has been performed using adopted F.E.M.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 전력전자학술대회 논문집
• /
• pp.86-87
• /
• 2013

본 논문에서는 직접 토크 제어(Direct Torque Control, DTC) 방식을 이용한 매입형 영구자석 동기전동기(Interior Permanent Magnet Synchronous Motor, IPMSM)의 운전 영역을 자속 평면에서 분석하고, 약자속 제어를 포함한 전 운전 영역에서의 최대 토크 운전 기법을 제안하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 추계학술대회
• /
• pp.257-258
• /
• 2010

최근 연료전지 기술의 발전으로 스택의 소형화 및 안전성이 확보됨에 따라 연료전지 자동차(FCEV)의 관심이 증가하고 있다. 본 논문에서는 변압기를 사용하는 풀-브리지 컨버터와 IPMSM 구동용 3상 인버터 구동 알고리즘을 제안하고 시뮬레이션을 통해 FCEV 적용 타당성을 검증 하였다.

• 전기전자학회논문지
• /
• 제26권4호
• /
• pp.653-658
• /
• 2022

본 논문에서는 온도 변화로 인한 영구자석 쇄교 자속 변화를 고려한 PMSM 드라이브의 MTPA(Maximum Torque per Ampere) 제어 알고리즘을 제시한다. 영구자석 쇄교 자속은 고정자 쇄교 관측기를 통해 실시간으로 추정되고, 추정된 영구자석 쇄교 자속으로부터 토크 오차 보정 계수가 계산된다. 2차원 MTPA look-up table(LUT)은 토크 오차를 보상하기 위해 영구자석 쇄교 자속 변화를 반영하는 MTPA 전류 궤적을 달성하기 위해 개발되었다. 제안된 PMSM의 MTPA 제어 알고리즘은 시뮬레이션을 통해 검증된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.91-93
• /
• 2007

This paper presents multi-PI controller of IPMSM drive using fuzzy and neural-network. In general, PI controller in computer numerically controlled machine process fixed gain. To increase the robustness, fred gain PI controller, Multi-PI controller proposes a new method based fuzzy and neural-network. Multi-PI controller is developed to minimize overshoot and settling time following sudden parameter changes such as speed, load torque, inertia, rotor resistance and self inductance. The results on a speed controller of IPMSM are presented to show the effectiveness of the proposed gain tuner. And this controller is better than the fixed gains one in terms of robustness, even under great variations of operating conditions and load disturbance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.191-193
• /
• 2005

This paper presents Hybrid PI controller of IPMSM drive using fuzzy adaptive mechanism(FAM) control. To increase the robustness, fixed gam PI controller, Hybrid PI controller proposes a new method based self tuning PI controller. Hybrid PI controller is developed to minimize overshoot and settling time following sudden parameter changes such as speed, load torque, inertia, rotor resistance and self inductance. The results on a speed controller of IPMSM are presented to show the effectiveness of the proposed gain tuner. And this controller is better than the fixed gains one in terms of robustness, even under great variations of operating conditions and load disturbance.