• 제목/요약/키워드: IPCC

검색결과 577건 처리시간 0.027초

시멘트 산업부문 온실가스(CO2) 배출계수 산정 연구 (A Study on the Estimation of Emission Factors for Greenhouse Gas (CO2) in Cement Industry)

  • 송형도;홍지형;엄윤성;이수빈;김대곤;김정수
    • 한국대기환경학회지
    • /
    • 제23권2호
    • /
    • pp.158-168
    • /
    • 2007
  • The cement industry is one of the energy intensive industries such as petrochemical and steel industry. The energy efficiency of cement industry is high comparing to oversea's cement industries due to the enforcement of energy conservation policies. The purpose of this study is estimate emission factors for greenhouse gas ($CO_{2}$) in cement industry. The results of field study, quicklime contained quantity of five factories were $0.64{\sim}0.65$. Measurement emission (15,382 ton/day) is 40% higher than process emission (8,929 ton/day) on the IPCC Guidelines (1996). Add to combustion emission on the lines of IPCC Guidelines (1996) is similar to the emission of this study. The emission factor of greenhouse gas ($CO_{2}$) were as follows the emission factor between $9.01E-01{\sim}2.15E-01\;ton/ton$ for $CO_{2}$. The result of this study is higher than emission factor of IPCC (0.51) but it is similar to U.S. EPA's (0.952).

B-C유 화력발전소 보일러의 Non-CO2 온실가스 배출계수 개발 연구 (Development of Non-CO2 Greenhouse Gas Emission Factors for the B-C Oil Fired Boiler Power Plants)

  • 이시형;김진수;김옥헌;이정우;이성호;전의찬
    • 한국대기환경학회지
    • /
    • 제27권1호
    • /
    • pp.41-49
    • /
    • 2011
  • The power plants are one of the GHG major source among the sectors of fossil fuel combustion, therefore information of its emission factors is very essential to the establishing control strategies for the greenhouse gas emissions. The $CH_4$ and $N_2O$ concentration from power plants were measured using GC-FID and GC-ECD. The results showed that $CH_4$ emission factor was 0.33 kg/TJ and $N_2O$ emission factor was 0.88 kg/TJ. The $CH_4$ and $N_2O$ emission factors developed in this study were compared with those for IPCC default value and other countries emission factors. The results showed that $CH_4$ emission factor was lower than IPCC default value and Finnish emission factor, but higher than Japanese emission factor. $N_2O$ emission factor was higher Japanese emission factor and IPCC default emission factor however lower than Finnish emission factor. More research is needed on our own emission factors of various energy-consuming facilities in order to stand on a higher position in international negotiations regarding the treaties on climate changes.

Time Slice 실험으로 모의한 동아시아 여름몬순의 변화 (Possible Changes of East Asian Summer Monsoon by Time Slice Experiment)

  • 문자연;김문현;최다희;부경온;권원태
    • 대기
    • /
    • 제18권1호
    • /
    • pp.55-70
    • /
    • 2008
  • The global time slice approach is a transient experiment using high resolution atmosphere-only model with boundary condition from the low resolution globally coupled ocean-atmosphere model. The present study employs this "time slice concept" using ECHAM4 atmosphere-only model at a horizontal resolution of T106 with the lower boundary forcing obtained from a lower-resolution (T42) greenhouse gas + aerosol forcing experiment performed using the ECHO-G/S (ECHAM4/HOPE-G) coupled model. In order to assess the impact of horizontal resolution on simulated East Asian summer monsoon climate, the differences in climate response between the time slice experiments of the present and that of IPCC SRES AR4 participating 21 models including coarser (T30) coupled model are compared. The higher resolution model from time slice experiment in the present climate show successful performance in simulating the northward migration and the location of the maximum rainfall during the rainy season over East Asia, although its rainfall amount was somewhat weak compared to the observation. Based on the present climate simulation, the possible change of East Asian summer monsoon rainfall in the future climate by the IPCC SRES A1B scenario, tends to be increased especially over the eastern part of Japan during July and September. The increase of the precipitation over this region seems to be related with the weakening of northwestern part of North Pacific High and the formation of anticyclonic flow over the south of Yangtze River in the future climate.

RBAC기반의 CRM 서비스를 위한 멀티 채널 IPCC 플랫폼 구현 (Implementation of multi-channel IPCC platform for RBAC based CRM service)

  • 하은실
    • 디지털콘텐츠학회 논문지
    • /
    • 제19권9호
    • /
    • pp.1751-1758
    • /
    • 2018
  • 통합 의료 정보 시스템은 의료 서비스의 질과 고객 만족도 향상, 환자의 안전을 우선으로 하는 시스템으로 다른 환경으로 구성된 단위 시스템을 통합하는 기능이 제공되어야 한다. RBAC 기반 의료 정보 시스템은 직종과 직책, 규칙에 따라 사용자는 접근 권한을 부여 받게 된다. 본 논문에서는 CRM 상담 서비스를 중심으로 한 멀티 채널 IPCC 컨택 센터의 플랫폼을 구현 하였다. 이를 통해 SMS MO, 진료 예약 및 취소, 상황별 통계, CRM/EMR 연동 서비스가 멀티 채널을 사용하여 상담원의 도움없이 통신 서비스가 가능하며 예약 환자의 부도율을 감소 시킬 수 있으며, 시스템 내부적으로는 RBAC 기반 CRM 상담 서비스는 권한 관리가 미리 생성되어 되어 있는 정보 테이블의 column을 조사하여 해당 테이블을 호출하는 procedure 및 object를 생성하고, 환자 정보를 나타나게 하여 개인 정보 보호를 전제 조건으로 접근 권한의 rule에 따라 환자별 상담 이력정보에 접근할 수 있으며, 의료 정보 사용 현황별 통계화면을 통해 추출된 정보들을 중심으로 상황별 운영 관리에 필요한 중요 지표를 관제 할 수 있어서 통합 의료 정보시스템의 운영 개선 서비스로의 확대 뿐만 아니라 환자에게 중요한 의사 결정시 의료진과 환자 및 가족에게 도움 줄 수 있다.

목제품 수급분석 및 전망에 관한 연구 (A study on the supply-demand analysis and outlook for wood products)

  • 이상민;박지은
    • 한국산학기술학회논문지
    • /
    • 제16권10호
    • /
    • pp.6959-6968
    • /
    • 2015
  • 이 연구는 기존의 목제품 수급모형(FOSMO2013)을 갱신하고, 제품별로 중장기적인 수요와 공급을 전망하는데 목적이 있다. 목제품 시장 수급모형은 주요 제품인 제재목, 합판, 파티클보드, 섬유판, 펄프 등으로 한정하였다. 각각의 제품에 대해 공급함수, 수입수요함수, 수요함수 등을 최신 자료를 이용하여 갱신하였다. 외생변수 가운데 하나인 세계 목재 및 목제품에 대한 가격 전망치는 Buongiorno 등(2012)의 연구결과를 적용하였다. Buongiorno의 연구는 기후변화에 관한 정부간 협의체(IPCC) 시나리오 3개(A1B, A2, B2)와 연료목재 수요에 대한 가정을 변경한 시나리오(A1B_LF)를 추가하여 전망결과를 발표하였는데, 본 연구의 전망치도 이와 같은 시나리오를 반영하여 2050년까지 총 4개의 시나리오에 따른 결과를 전망하였다. 전망 결과 국내 목재 및 목제품에 대한 장기 전망치는 시나리오와 제품별 차이는 있지만 대체적으로 생산은 감소하고 수입은 증가할 것으로 예상되었다.

동아시아 지역의 AOGCM 불확실성 평가 및 미래기후전망 (An Uncertainty Assessment of AOGCM and Future Projection over East Asia)

  • 김민지;신진호;이효신;권원태
    • 대기
    • /
    • 제18권4호
    • /
    • pp.507-524
    • /
    • 2008
  • In this paper, future climate changes over East Asia($20^{\circ}{\sim}50^{\circ}N$, $100^{\circ}{\sim}150^{\circ}E$) are projected by anthropogenic forcing of greenhouse gases and aerosols using coupled atmosphere-ocean general circulation model (AOGCM) simulations based on Intergovernmental Panel on Climate Change (IPCC) Special Report on Emissions Scenarios (SRES) B1, A1B and A2 scenarios. Before projection future climate, model performance is assessed by the $20^{th}$ Century (20C3M) experiment with bias, root Mean Square Error (RMSE), ratio of standard deviation, Taylor diagram analysis. The result of examination of the seasonal uncertainty of T2m and PCP shows that cold bias, lowered than that of observation, of T2m and wet bias, larger than that of observation, of PCP are found over East Asia. The largest wet bias is found in winter and the largest cold bias is found in summer. The RMSE of temperature in the annual mean increases and this trend happens in winter, too. That is, higher resolution model shows generally better performances in simulation T2m and PCP. Based on IPCC SRES scenarios, East Asia will experience warmer and wetter climate in the coming $21^{st}$ century. It is predict the T2m increase in East Asia is larger than global mean temperature. As the latitude goes high, the warming over the continents of East Asia showed much more increase than that over the ocean. An enhanced land-sea contrast is proposed as a possible mechanism of the intensified Asian summer monsoon. But, the inter-model variability in PCP changes is large.

ZigBee 센서를 활용한 건설장비의 CO2 배출량 측정방법 (The Measurement Method of CO2 Emission for Construction Equipment using ZigBee Sensor)

  • 전진구;김병수
    • 대한토목학회논문집
    • /
    • 제32권2D호
    • /
    • pp.167-174
    • /
    • 2012
  • 최근 온실가스저감인증(CERs)과 관련한 $CO_2$ 배출량 감축을 위한 노력은 전생애주기를 통하여 활발하게 연구가 진행되고 있다. 그러나 $CO_2$ 배출량을 줄이기 위한 기술은 아직 초기단계에 있으며, 정확하게 계산하기 위한 기술도 불충분하다. 따라서, 본 연구는 ZigBee 센서를 활용하여 건설장비의 $CO_2$ 배출량을 실시간으로 측정하기 위한 방법을 개발하고자 하였다. 이산화탄소 배출량 산출방법을 검토하기 위하여 IPCC 제시 방법론을 기준으로 $CO_2$ 배출량에 영향을 미치는 영향인자들을 분류하였다. 또한, 무선데이터통신을 활용한 ZigBee 센서의 활용성을 검토하였다. 검토결과, 건설장비의 $CO_2$ 배출량과 RPM 그리고 연료사용량을 주 측정대상으로 하여 측정하고, $CO_2$ 배출량에 영향을 미치는 요소인 장비의 연식, 대기시간, 차량종류, 연료종류도 추가하여 조사할 필요가 있다는 결론을 얻었다.

Climate Change Scenario Generation and Uncertainty Assessment: Multiple variables and potential hydrological impacts

  • 권현한;박래건;최병규;박세훈
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2010년도 학술발표회
    • /
    • pp.268-272
    • /
    • 2010
  • The research presented here represents a collaborative effort with the SFWMD on developing scenarios for future climate for the SFWMD area. The project focuses on developing methodology for simulating precipitation representing both natural quasi-oscillatory modes of variability in these climate variables and also the secular trends projected by the IPCC scenarios that are publicly available. This study specifically provides the results for precipitation modeling. The starting point for the modeling was the work of Tebaldi et al that is considered one of the benchmarks for bias correction and model combination in this context. This model was extended in the framework of a Hierarchical Bayesian Model (HBM) to formally and simultaneously consider biases between the models and observations over the historical period and trends in the observations and models out to the end of the 21st century in line with the different ensemble model simulations from the IPCC scenarios. The low frequency variability is modeled using the previously developed Wavelet Autoregressive Model (WARM), with a correction to preserve the variance associated with the full series from the HBM projections. The assumption here is that there is no useful information in the IPCC models as to the change in the low frequency variability of the regional, seasonal precipitation. This assumption is based on a preliminary analysis of these models historical and future output. Thus, preserving the low frequency structure from the historical series into the future emerges as a pragmatic goal. We find that there are significant biases between the observations and the base case scenarios for precipitation. The biases vary across models, and are shrunk using posterior maximum likelihood to allow some models to depart from the central tendency while allowing others to cluster and reduce biases by averaging. The projected changes in the future precipitation are small compared to the bias between model base run and observations and also relative to the inter-annual and decadal variability in the precipitation.

  • PDF

Methane emission from municipal solid waste dumpsites: A case study of Chennai city in India

  • Srinivasan, Pavithrapriya;Andimuthu, Ramachandran;S.N., Ahamed Ibrahim;Ramachandran, Prasannavenkatesh;Rajkumar, Easwari;Kandasamy, Palanivelu
    • Advances in environmental research
    • /
    • 제9권2호
    • /
    • pp.97-107
    • /
    • 2020
  • The indiscriminate growth in global population poses a threat to the world in handling and disposal of Municipal solid waste. Rapid urban growth increases the production, consumption and generation of Municipal solid waste which leads to a drastic change in the environment. The methane produced from the Municipal Solid waste accounts for up to 11% global anthropogenic emissions, which is a major cause for global warming. This study reports the methane emission estimation using IPCC default, TNO, LandGEM, EPER and close flux chamber from open dump yards at Perungudi and Kodungaiyur in Chennai, India. The result reveals that the methane emission using close flux chamber was in the range of 8.8 Gg/yr-11.3 Gg/yr and 6.1Gg/yr to 9.1 Gg/yr at Kodungaiyur and Perungudi dump yard respectively. The per capita waste generation was estimated based on waste generation and population. The waste generation potential was projected using linear regression model for the period 2017-2050. The trend of CH4 emission in the actual field measurement were increased every year, similarly the emission trend also increased in IPCC default method (mass balance approach), EPER Germany (zero order decay model) where as TNO and Land GEM (first order decay model) were decreased. The present study reveals that Kodungaiyur dump yard is more vulnerable to methane emission compared to Perungudi dump yard and has more potential in waste to energy conversion mechanisms than compare to Perungudi dump yard.

1990년부터 2013년까지 농업 분야 국가 온실가스 배출량 평가 - 경종부문 중심으로 - (Estimation of National Greenhouse Gas Emissions in Agricultural Sector from 1990 to 2013 - Focusing on the Crop Cultivation -)

  • 최은정;정현철;김건엽;이선일;이종식
    • 한국기후변화학회지
    • /
    • 제7권4호
    • /
    • pp.443-450
    • /
    • 2016
  • The major greenhouse gases (GHGs) in agricultural sector are methane ($CH_4$), nitrous oxide ($N_2O$), carbon dioxide ($CO_2$). GHGs emissions are estimated by pertinent source category in a guideline book from Intergovernmental Panel on Climate Change (IPCC) such as methane from rice paddy, nitrous oxide from agricultural soil and crop residue burning. The methods for estimation GHGs emissions in agricultural sector are based on 1996 and 2006 IPCC guideline, 2000 and 2003 Good Practice Guidance. In general, GHG emissions were calculated by multiplying the activity data by emission factor. The total GHGs emission is $10,863Gg\;CO_2-eq$. from crop cultivation in agricultural sector in 2013. The emission is divided by the ratio of greenhouse gases that methane and nitrous oxide are 64% and 34%, respectively. Each gas emission according to the source categories is $7,000Gg\;CO_2-eq$. from rice paddy field, $3,897Gg\;CO_2-eq$. from agricultural soil, and $21Gg\;CO_2-eq$. from field burning, respectively. The GHGs emission in agricultural sector had been gradually decreased from 1990 to 2013 because of the reduction of cultivation. In order to compare with indirect emissions from agricultural soil, each emission was calculated using IPCC default factors (D) and country specific emission factors (CS). Nitrous oxide emission by CS applied in indirect emission, as nitrogen leaching and run off, was lower about 50% than that by D.