• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.8
• /
• pp.666-671
• /
• 2000

With the current advances in optical WDM (Wavelength Division Multiplexing) networking technologies and the increasing demand for network bandwidth the Next Generation Internet is expected to be a network that runs IP(Internet Protocol) directly over WDM-based optical networks. The network control architecture for the IP over WDM networks is different from that of traditional Internet since the underlying WDM devices have more constraints than electronic IP routers such as the lack of optical buffers and wavelength continuity property etc. In this paper we introduce several architectural models for implementing IP over WDM networks and propose an integrated network control framework for the IP over WDM networks. This framework leverages the traffic engineering control architecture for the MPLS (Multi-Protocol Label Switching) networks and is mainly developed for the IP over packet-switched WDM networks. We also report several preliminary simulation results of contention resolution schemes in the packet-switched WDM networks.

• Journal of Communications and Networks
• /
• v.9 no.4
• /
• pp.394-401
• /
• 2007

High speed all optical network is a viable option to satisfy the exponential growth of internet usage in the recent years. Optical networks offer very high bit rates and, by employing technologies like internet protocol over wavelength division multiplexing(IP-over-WDM), these high bit rates can be effectively utilized. However, failure of a network component, carrying such high speed data traffic can result in enormous loss of data in a few seconds and persistence of a failure can severely degrade the performance of the entire network. Designing IP-over-WDM networks, which can withstand failures, has been subject of considerable interest in the research community recently. Most of the research is focused on the failure of optical links in the network. This paper addresses the problem of designing IP-over-WDM networks that do not suffer service degradation in case of a single link failure. The paper proposes an approach based on the framework provided by a recent paper by M. Kurant and P. Thiran. The proposed approach can be used to design large survivable IP-over-WDM networks.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.6
• /
• pp.2711-2733
• /
• 2018

Minimizing power consumption in bandwidth limited optical traffic grooming networks is presented as a two-objective optimization problem. Since the main objective is to route a connection, the network throughput is maximized first, and then the minimum power consumption solution is found for this maximized throughput. Both transparent IP over WDM (Tp-IPoWDM) and translucent IP over WDM (Tl-IPoWDM) network may be applied to examine such bi-objective algorithms. Simulations show that the bi-objective algorithms are more energy-efficient than the single objective algorithms where only the throughput is optimized. For a Tp-IPoWDM network, both link based ILP (LB-ILP) and path based ILP (PB-ILP) methods are formulated and solved. Simulation results show that PB-ILP can save more power than LB-ILP because PB-ILP has more path selections when lightpath lengths are limited. For a Tl-IPoWDM network, only PB-ILP is formulated and we show that the Tl-IPoWDM network consumes less energy than the Tp-IPoWDM network, especially under a sparse network topology. For both kinds of networks, it is shown that network energy efficiency can be improved by over-provisioning wavelengths, which gives the network more path choices.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.4
• /
• pp.370-379
• /
• 2014

Recently, the interest in optical network with multifiber link is continuing to rise since the network traffic has been growing exponentially. However, growing traffic in network leads to increasing the energy consumption of the network equipment. In this paper, we propose a dynamic routing and wavelength assignment (RWA) algorithm based on V-like cost function and layered graph to improve energy efficiency in IP over WDM network with multifiber link. The V-like cost function is used to decide the fiber cost according to the number of used wavelengths. The layered graph with multifiber link is used to select the energy efficient route and wavelength. The proposed RWA algorithm is compared and analyzed with conventional algorithm in view of average power consumption and blocking probability through OPNET modeler.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.7
• /
• pp.1257-1262
• /
• 2001

In recent years there has been a lot of interest in carrying IP over WDM networks in an efficient manner. The benefits here include larger bandwidth capacities, better network scalability, and more efficient operation. W based approach, termed "lambda-labeling" is presented for direct If over WDM integration. In this paper, we study on architecture approach method consider of optical Internet evolution that based on MPLamdaS conception of IETF. Label stack conception collect electronic LSP of optical LSP. This paper is proposed method of co-operation between MPLS domain and MPLambdaS domain. Additionally, proposed architecture of Edge Optical LSR.tical LSR.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.5140-5147
• /
• 2013

This paper presents a new idea of structural design of the optical access network for IPOW(IP over WDM) services. More efficient network can be constructed, because the IP packets are transmitted directly to the WDM without going through an intermediate layer of networks. The wavelength Routing is based on a label switching technology. The ability to transmission of high volume traffics and QoS capability of the optical label switching directly to the end user of the IPOW optical internet networks is provided. As in AON(Active Optical Network) flexible bandwidth on demand subscribers is allocated. By the Simulation of the proposed optical access networks to measure the BER(Bits Error Ratio) at the end of the nodes the network characteristics are analyzed. These results are based on the design of efficient optical network.

• Journal of the Optical Society of Korea
• /
• v.19 no.1
• /
• pp.13-21
• /
• 2015

In recent years energy consumption has become a main concern for network development, due to the exponential increase of network traffic. Potential energy savings can be obtained from a load-adaptive scheme, in which a day can be divided into multiple time periods according to the variation of daily traffic patterns. The energy consumption of the network can be reduced by selectively turning off network components during the time periods with light traffic. However, the time segmentation of daily traffic patterns affects the energy savings when designing multiperiod logical topology in optical wavelength routed networks. In addition, turning network components on or off may increase the overhead of logical topology reconfiguration (LTR). In this paper, we propose two mixed integer linear programming (MILP) models to design the optimal logical topology for multiple periods in IP-over-WDM networks. First, we formulate the time-segmentation problem as an MILP model to optimally determine the boundaries for each period, with the objective to minimize total network energy consumption. Second, another MILP formulation is proposed to minimize both the overall power consumption (PC) and the reconfiguration overhead (RO). The proposed models are evaluated and compared to conventional schemes, in view of PC and RO, through case studies.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.5B
• /
• pp.404-413
• /
• 2003

Optical Internet consists of IP domain and optical (WDM) domain, where the wavelength routing (WR) and optical burst switching (OBS) are the promising switching technologies in the optical domain. In this paper, we perform the simulations on the WR network and the OBS network, and compare their performances. It is verified from our simulations that the OBS network performs better than the WR network when the same network resources are given.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.41-44
• /
• 2000

Because of internet's growth, today's network has a serious bandwidth problem. WDM(Wavelength Division Multiplexing) is a solution of this problem. In the WDM networks, QoS(Quality of Service) is as important as bandwidth. And today's voice over IP technology makes a lot of delay-sensitive internet traffic. De]ay-sensitive internet traffic is growing up, so more QoS is needed. We proposed effective solution to assign QoS.

• The KIPS Transactions:PartC
• /
• v.12C no.6 s.102
• /
• pp.881-890
• /
• 2005

Over for the past 10 years, the increase in geometric progression for the internet traffic, has allowed the IP protocol framework to be the most important network technology. In addition, the internet service is being developed as a service mode differentiated, aiming to support the new-mode real-time multimedia services such as internet phone, video conference, cyber reality, and internet game, focusing on offering a latest service. These days, aiming to solve the need for broad bandwidth along with guaranteeing QoS, the WDM technology of offering multiple gigabit wavelengths is emerging as the core technology of next-generation optical internet backbone network. In the next-generation optical internet backbone network based on WDM, the QoS framework is one of fore subjects aiming to offer a service of guaranteeing QoS This study analyzes the requirements of performance related to QoS framework in IP Subnet and in WDM optical backbone network, and suggests optical QoS service framework differentiated. in order to guarantee end-to-end QoS through the next-generation optical internet backbone network, using GMPLS control protocol.