• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.3
• /
• pp.684-690
• /
• 2010

Most of the existing SoCs have shared bus architecture which always has a bottleneck state. The more IPs are in an SOC, the less performance it is of the SOC, Therefore, its performance is effected by the entire communication rather than CPU speed. In this paper, we propose cross-bar switch bus architecture for the reduction of the bottleneck state and the improvement of the performance. The cross-bar switch bus supports up to 8 masters and 16 slaves and parallel communication with architecture of multiple channel bus. Each slave has an arbiter which stores priority information about masters. So, it prevents only one master occupying one slave and supports efficient communication. We compared WISHBONE on-chip shared bus architecture with crossbar switch bus architecture of the SOC platform, which consists of an OpenRISC processor, a VGA/LCD controller, an AC97 controller, a debug interface, a memory interface, and the performance improved by 26.58% than the previous shared bus.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.11
• /
• pp.27-33
• /
• 2011

Recently many display devices support the digital display interface as display market growth. DisplayPort is a next generation display interface at the PC, projector and high definition content applications in more widely used connection solution development. This paper implements multiple streams based on the behavior of the main link that is suitable for the display port v1.1a standard. The limit point of Displayport, interface between the Sink Device and Sink Device is also implemented. And two or more differential image data are enable to output the result through four Lanes stated in display port v1.1a, of two or more display devices without the addition of a separate Lane. The Multiple Video Streaming Controller is implemented with 6,222 ALUTs and 6,686 register, 999,424 of block memory bits synthesized using Quartus II at Altera Audio/Video Development board (Stratix II GX FPGA Chip).

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.3 s.357
• /
• pp.52-58
• /
• 2007

This paper describes the PLL of TCON(Timing Controller) chip for FPD(Flat Panel Display). The recent TCON requires wide range frequency operation of $8\sim135MHz$ in PLL. In order to be satisfied this requirement the new V-I converter.circuit. The V-I converter of new architecture increased the minimum/maximum current ratio which widens the operation frequency range of VCO's md also guaranteed linearity of VCO's. The proposed PLL circuits in FPD TCON show the measuring performance of loops RMS jitter in the range of $8\sim135MHz$. The designed circuit was fabricated in 1-ploy 3-metal 0.25um TSMC process technology and has a operation range or $8\sim135MHz$ with 2.5V power.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.325-330
• /
• 2012

A single-phase PVPCS(photovoltaic power conditioning system) that contains a single phase dc-ac inverter tends to draw an ac ripple current at twice the out frequency. Such a ripple current may shorten passive elements life span and worsen output current THD. As a result, it may reduce the efficiency of the whole PVPCS system. In this paper, the ripple current propagation is analyzed, and two methods to reduce the ripple current are proposed. Firslyt, this paper presents notch filter with IP voltage controller to reject specific current ripple in single-phase PVPCS. The notch filter can be designed that suppress just only specific frequency component and no phase delay. The proposed notch filter can suppress output command signal in the ripple bandwidth for reducing output current THD. Secondly, for reducing specific current ripple, the other method is feed-forward compensation to incorporate a current control loop in the dc-dc converter. The proposed notch filter and feed-forward compensation method have been verified with computer simulation and simulation results obtained demonstrate the validity of the proposed control scheme.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.6
• /
• pp.405-411
• /
• 2017

As the number of sensors in a ship has increased, studies have been actively conducted to efficiently manage a large amount of data. Sensors in a ship follow the NMEA (National Marine Electronics Association) data format. In particular, NMEA0183 standardized as IEC 61162-1 and NMEA2000 standardized as IEC 61162-3 are widely used. NMEA0183 is a protocol based on serial communication and NMEA2000 is a protocol based on CAN (Controller Area Network) communication. We implemented a gateway that receives data from NMEA0183 sensors and NMEA2000 sensors and then transmits them to the server on TCP/IP network. By using the NMEA2000 0183/2000 gateway to receive the sensor data and manage it through the ship's preventive maintenance system, the sensor data can be utilized efficiently and promptly. This management can reduce crew's daily tasks and reduce the number of accidents.

• Proceedings of the KIEE Conference
• /
• 2003.10b
• /
• pp.42-44
• /
• 2003

As the industry is developed, uses of various electric motor are increasing from general home to various fields of industry, and the kind becomes various daily. For these reasons, it is required to study the remote control and a package management about change of a speed drive system, the supervision of administration appliance by real time, and the collection and process data together using internet prevailed on industry whole. This paper deals with the development of a Web-Based remote control system for permanent magnet synchronous motor drives. The client/server system using TCP/IP protocols and DSP controller for remote control through internet and the Web interface that users can confirm data and state of PMSM(Permanent Magnet Synchronous Motor) is developed. This system is available for driving, braking, variable speed control and monitoring for PMSM in real time through administration program of Web-Based.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1586-1589
• /
• 2005

GUMF (Global User Management Framework) that is proposed in this research can be applied to next generation network such as BcN (Broadband convergence Network), it is QoS guaranteed security framework for user that can solve present Internet's security vulnerability. GUMF offers anonymity for user of service and use the user's real-name or ID for management of service and it is technology that can realize secure QoS. GUMF needs management framework, UMS (User Management System), VNC (Virtual Network Controller) etc. UMS consists of root UMS in country dimension and Local UMS in each site dimension. VNC is network security equipment including VPN, QoS and security functions etc., and it achieves the QoSS (Quality of Security Service) and CLS(Communication Level Switching) functions. GUMF can offer safety in bandwidth consumption attacks such as worm propagation and DoS/DDoS, IP spoofing attack, and current most attack such as abusing of private information because it can offer the different QoS guaranteed network according to user's grades. User's grades are divided by 4 levels from Level 0 to Level 3, and user's security service level is decided according to level of the private information. Level 3 users that offer bio-information can receive secure network service that privacy is guaranteed. Therefore, GUMF that is proposed in this research can offer profit model to ISP and NSP, and can be utilized by strategy for secure u-Korea realization.

• Journal of Communications and Networks
• /
• v.7 no.2
• /
• pp.192-206
• /
• 2005

Integration of mobile networks and Internet has started with 2.5 generation of mobile cellular networks. Internet traffic is today dominant traffic type worldwide. The hanger for higher data rates needed for data traffic and new IP based services is essential in the development of future wireless networks. In such situation, even 3G with up to 2 Mbit/s has not provided data rates that are used by Internet users with fixed broadband dial-up or through wired local area networks. The solution to provide higher bit rates in wireless access network has been found in wireless LAN although initially it has been developed to extend wired LAN into wireless domain. In this paper, we propose and describe a solution created for interoperability between mobile cellular network and WLAN. The integration between two networks, cellular and WLAN, is performed on the authentication, authorization, and accounting, i.e., AAA side. For that purpose we developed WLAN access controller and WLAN AAA gateway, which provide gateway-type access control as well as charging and billing functionalities for the WLAN service. In the development process of these elements, we have considered current development stadium of all needed network entities and protocols. The provided solution provides cost-effective and easy-to-deploy PLMN-WLAN Internetworking scenario.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.11
• /
• pp.3775-3788
• /
• 2014

With the increasing number of the wireless and mobile networks, the way that people use the Internet has changed substantively. Wireless multimedia services, such as wireless video streaming, mobile video game, and mobile voice over IP, will become the main applications of the future wireless Internet. To accommodate the growing volume of wireless data traffic and multimedia services, cognitive radio (CR) and Information-Centric Network (ICN) have been proposed to maximize the utilization of wireless spectrum and improve the network performance. Although CR and ICN have high potential significance for the future wireless Internet, few studies have been conducted on collaborative operations of CR and ICN. Due to the lack of infrastructure support in multi-hop ad hoc CR networks, the problem is more challenging for video streaming services. In this paper, we propose a Cross-layer Video Streaming Mechanism (CLISM) for Cognitive Radio Ad Hoc Information Centric Networks (CRAH-ICNs). The CLISM included two distributed schemes which are designed for the forwarding nodes and receiving nodes in CRAH-ICNs. With the cross-layer approach, the CLISM is able to self-adapt the variation of the link conditions without the central network controller. Experimental results demonstrate that the proposed CLISM efficiently adjust video transmission policy under various network conditions.

• Journal of Biomedical Engineering Research
• /
• v.18 no.1
• /
• pp.17-24
• /
• 1997

We have developed a patient monitoring system including module-based bedside monitors, interbed network, central stations, clinical workstations, and DB servers. A bedside monitor with a color LCD can accommodate up to 3 module cases and 21 different modules. Six different physiological parameters of ECG, respiration, invasive blood pressure, noninvasive blood pressure, body temperature, and arterial pulse oximetry with plethysmoyaph are provided as parameter modules. In a single bedside monitor, modules and a module controller communicate with IMbps data rate through an intrabed network based on RS-485 and HDU protocol. At the same time, it communicates with other bedside monitors and central stations through interbed network based on 1 OMbps Ethernet and TCP/IP protocol. Central stations using 20" color CRT monitors can be connected with many bedside monitors and they display 18 channels of waveforms simultaneously. Clinical workstations are used mainly for the review of patient datE In order to accommodate more advanced data management capabilities such as 24-hour full disclosure, we have developed a relational database server dedicated to the patient monitoring system. Software for bedside monitor, central station, and clinical workstation fully utilizes graphical user interface techniques and all functions are controlled by a rotate/push button on the bedside monitor arid a mouse on the central station and clinical workstation. The entire system satisfies the requirements of AAMI and ANSI standards in terms of electrical safety and performances.nces.