• Journal of IKEEE
• /
• v.5 no.1 s.8
• /
• pp.24-34
• /
• 2001

IP address lookup is a major bottleneck of IP packet processing in high speed router. Existing IP lookup methods are focused only on lookup throughput without considering lookup table update. So their slow update can lead to lookup blocking or wrong routing decision based on obsolete routes. Especially existing IP lookup methods based on CAM(content addressable memory) have slow update of O(n) cycles in spite of their high throughput and low area complexity In this paper we proposes a new IP address lookup method based on pipelined CAM architecture(PICAM) with fast update of O(1) cycle of lookup table and high throughput and low area complexity.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.1
• /
• pp.127-132
• /
• 2019

In this paper, we design and build an information system for the growth management of agricultural products and aquatic products by ubiquitous computing. So that, we installed various sensor systems and developed IP Cam to establish monitoring. It was possible to construct an environmental management system based on IT technology by a database that directly controls and manages the growth conditions of agricultural products and aquatic products by monitoring. We have installed various sensors that can acquire data in real time and IP Cam is designed and manufactured in three parts. It was applied to agricultural and marine products and monitored soil moisture, temperature, and environmental information to establish conditions for growth environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.6A
• /
• pp.1107-1116
• /
• 2001

고속 IP 주소 룩업(lookup)은 고속 인터넷 라우터의 성능을 좌우하는 주요 요소이다. LPM(longest prefix matching) 탐색은 IP 주소 룩업에서 가장 시간이 많이 걸리는 부분이다. PICAM은 고속 LPM 탐색을 위한 파이프라인 CAM 구조로서, 기존 CAM(content addressable memory, 내용 주수화 메모리)을 이용한 방법보다 룩업 테이블의 갱신속도가 빠르면서도 LPM 탐색율이 높은 CAM 구조이다. PICAM은 3단계의 파이프라인으로 구성된다. 단계 1 및 단계 2의 키필드분할수 및 매칭점의 분포에 따라 파이프라인의 성능이 좌우되며, LPM 탐색율이 달라질 수 있다. 본 논문에서는 PICAM의 파이프라인 성능모델을 제시하고, 이산사건 시뮬레이션(discrete event simulation)을 수행하여, 최적의 PICAM 구조를 도출하였다. IP version 4인 경우 키필드분할수를 8로 하고, 부하가 많이 걸리는 키필드블록을 중복 설치하는 것이 최적구조이며, IP version 6인 경우 키필드블록의 개수를 16으로 하는 것이 최적구조다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12C
• /
• pp.199-207
• /
• 2001

We propose an adaptive shaping controller equipped with the technologies of shaping and buffering VoIP packets arriving at the receiving end by the CAM-type controller. In order to conceal interarrival packet delay variation, the conventional jitter buffers force them to be too large, thereby causing the audio quality to suffer excessive delay. However, by using our proposed method, the delay caused by shaping operation dynamically increases or decreases on the level of jitter that exists with in the IP network. This makes the delay accommodates adaptively the network jitter condition. The less jitter network has the fewer delay the shaping controller requires for jitter elimination. And the CAM-type method generally makes the shaping operation faster and leads to processing packets in as little time as can. We analyse the packet loss and delay performance dependency on the average talk ratio and the number of jitter buffer entries in shaping controller. Surprising, we show that the average delay using our shaping controller is about 70msec. This performance is much better than with the delay equalization method which forces the receiving end to delay about 60msec.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.7B
• /
• pp.647-659
• /
• 2003

LPM(Longest Prefix Matching)searching in If address lookup is a major bottleneck of IP packet processing in the high speed router. In the conventional lookup table for the LPM searching in CAM(Content Addressable Memory) the complexity of fast update take 0(1). In this paper, we designed pipeline architecture for fast update of 0(1) cycle of lookup table and high throughput and low area complexity on LPM searching. Lookup-table architecture was designed by CAM(Content Addressable Memory)away that uses 1bit RAM(Random Access Memory)cell. It has three pipeline stages. Its LPM searching rate is affected by both the number of key field blocks in stage 1 and stage 2, and distribution of matching Point. The RTL(Register Transistor Level) design is carried out using Verilog-HDL. The functional verification is thoroughly done at the gate level using 0.35${\mu}{\textrm}{m}$ CMOS SEC standard cell library.

• Journal of Internet Computing and Services
• /
• v.13 no.1
• /
• pp.57-63
• /
• 2012

Recently, Development of high-speed internet networks can be a real-time video conference system. SD-quality still images using the software codec system exists, and two-way system with mobile systems, but in most video only send and receive video system. In this study, HD web-cam using the two-way live broadcasts simultaneously in the education system and the mobile system has developed an audible system. In the study using the H.264 standard video compression techniques were applied to high-bandwidth compression technology, smart phones, to develop a streaming server for broadcasting were applied. Video sharing, document, web-sharing was made possible in real time. In addition, the private IP for WiFi zone, available anytime, anywhere that can be converted to a public IP technology, IP tunneling technology applied.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.5
• /
• pp.345-353
• /
• 2003

When designing network processors or implementing network equipments such as routers are implemented, IP lookup operations cause the major impact on their performance. As the organization of the IP address becomes simpler, the speed of the IP lookup operations can go faster. However, since the efficient management of IP address is inevitable due to the increasing number of network users, the address organization should become more complex. Therefore, for both IPv4(IP version 4) and IPv6(IP version 6), it is the essential fact that IP lookup operations are difficult and tedious. Lots of researcher for improving the performance of IP lookups have been presented, but the good solution has not been came out. Software approach alleviates the memory usage, but at the same time it si slow in terms of searching speed when performing an IP lookup. Hardware approach, on the other hand, is fast, however, it has disadvantages of producing hardware overheads and high memory usage. In this paper, conventional researches on IP lookups are shown and their advantages and disadvantages are explained. In addition, by mixing two representative structures, a new hybrid parallel architecture for fast IP lookups is proposed. The performance evaluation result shows that the proposed architecture provides better performance and lesser memory usage.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.533-536
• /
• 2000

In this paper, we proposed high performance packet forwarding engine for asynchronous transfer mode(ATM) based gigabit routers. The forwarding engine is based on ATM switch and accommodates four 622Mbps ports. The forwarding engine has been designed to be able to process the Intemet protocol(IP) packet at 2.5Gbps using the pipelined If header processing and lookup control mechanism. For high performance packet forwarding, we used content addressable memory(CAM) based routing coprocessor operating in hardware and implemented the pipelined lookup control function into a field programmable gate array(FPGA). The pipelined packet header processing mechanism enhanced the forwarding performance of the If packets ingressed from four different 622Mbps ports. Moreover, the If lookup controller designed to have the performance up to 12.5Mpps. The proposed forwarding engine is also designed to support differentiated services(DS) and multiprotocol label switching(MPLS).

• Computational Structural Engineering
• /
• v.4 no.3
• /
• pp.51-54
• /
• 1991

금성사는 뉴미디어 서비스, 컴퓨터와 종합정보 통신망의 결합 등 2000년대 신시장에 대한 적극적인 도전과 국내시장 개방에 대한 대처는 물론 주요 고기능 시스템을 운영할 수 있는 첨단 소프트웨어의 자체개발력 구축을 통한 국제 경쟁력을 강화하기 위하여 국산 워크스테이션을 개발하게 되었다. 썬사의 스팍스테이션 1과 100% 호환성을 갖는 MIRACLEstation 20은 스팍 RISC칩을 장착했고 운영체제는 썬 OS4.1, 또한 스팍스테이션에서 운용되는 모든 소프트웨어를 수정없이 사용할 수 있어 CAD/CAM/CAE, 금융, Software Engineering, Simulation, 국방, GIS 등의 분야에 3,300여종의 소프트웨어가 지원되는 워크스테이션이다. 이 제품은 207MB 하드디스크 1개와 1.44MB 플로피디스크 1개를 내장했고, 이더넷, TCP/IP, ONC/NFS를 기본 사양으로 LAN 및 WAN 환경에서 동기종 뿐만 아니라 타기종과 인터페이스를 용이하게 함으로써 워크스테이션의 필수요건인 네트워킹을 완벽하게 구현한다. 특히 국내 최초의 양산에 성공한 썬 클론 제품으로서 가격대비 성능면에서 뛰어난 제품이다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2B
• /
• pp.91-97
• /
• 2006

As increasing the network bandwidth, the threat of a network also increases with emerging various new services. For a high-performance network security, It is generally used that high-speed packet classification methods which employ hardware like TCAM. There needs an method using these devices efficiently because they are expensive and their capacity is not sufficient. In this paper, we propose an efficient packet classification using a Ternary-CAM(TCAM) which is widely used device for high-speed packet classification in which we have applied Snort rule set for the well-known intrusion detection system. In order to save the size of an expensive TCAM, we have eliminated duplicated IP addresses and port numbers in the rule according to the partitioning of a table in the TCAM, and we have represented negation and range rules with reduced TCAM size. We also keep advantages of low TCAM capacity consumption and reduce the number of TCAM lookups by decreasing the TCAM partitioning using combining port numbers. According to simulation results on our TCAM partitioning, the size of a TCAM can be reduced by upto 98$\%$ and the performance does not degrade significantly for high-speed packet classification with a large amount of rules.