• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.3
• /
• pp.503-510
• /
• 2021

This study intends to apply the mathematical method of fractional order differentiation to a controller that controls the response of the system. Therefore, we design integrator for the fractional index by converting it into discrete time to construct a controller. The IP controller composes an integral controller for errors and the proportional controller applies only the system output. The controller is designed by using the fractional order integrator to the integral controller of the IP controller. First, the performance of the PI controller and the IP controller is compared, and the designed controller is applied to the speed control of the motor. As a result, the motor output speed was uniformed and precise control performance could be obtained. It was confirmed that the speed error in the steady state is within 0.1 [%], and it has precise and uniform speed control performance without overshoot.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.4 s.310
• /
• pp.35-44
• /
• 2006

The network induced transmission delay deteriorates the performance and stability of the real-time distributed control system on LonWorks over IP (LonWorks/IP) virtual device network (VDN). LonWorks/IP virtual device network is an integrated form of LonWorks device network and IP data network. The time delay in servo control on the LonWorks/IP-based VDN has highly stochastic nature. In the real-time distributed servo applications for predictive maintenance on the factory floor, timely response is essential.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.3
• /
• pp.511-518
• /
• 2021

In order to obtain a good tracking performance of the motor, it is necessary to design a controller that can respond to a disturbance by including a disturbance observer. The disturbance observer of the motor is designed to estimate the load torque and the back electromotive voltage based on the first-order low-pass filter. A PI controller and an IP controller were designed to compare the correlation between the disturbance observer and the controller and to obtain improved control performance. To check the performance of the designed observer and the controller, it was applied to a 120 [W] class BLDC motor. As a result, overshoot is reduced, and it can be seen that the steady-state error converges to zero.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.4B
• /
• pp.298-305
• /
• 2003

In this paper, we proposed a high performance lookup controller for IP packet forwarding engine of ATM based label edge routers. The lookup controller is designed to provide services such as MPLS, VPN, ELL, and RT services as well as the best effort. For high speed searching for IP addresses, we employed a TCAM based hardware search device not using traditional algorithmic approaches. We also implement lookup control functions into FPGA for fast processing of packet header and lookup control. The proposed lookup controller is designed to support differenciated services for users and to process in pipelined mechanism for performance improvement. A two-step search scheme is also applied to perform lookup for the key combined with multi-field of packet header. We found that the proposed lookup controller provides the performance of about 16M packets per second through simulations.

• Proceedings of the KIPE Conference
• /
• 2011.11a
• /
• pp.233-234
• /
• 2011

본 논문에서는 IPMSM의 약자속 제어 영역에서 토크제어를 하기위한 전류제어기를 PI-IP 혼합제어기로 구성하였다. 약자속 제어 영역에서 토크제어 시 d축과 q축의 인덕턴스 차이로 인해 전류제어 응답의 차이가 발생하여 전압여유분 확보에 문제점이 발생한다. 이러한 문제점을 개선하고자 PI-IP 혼합제어기를 적용하여 약자속 영역에서의 d축과 q축의 전류 제어기의 응답특성을 달리하여 토크제어 시 과도상태에서 발생하는 문제점을 개선하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12C
• /
• pp.199-207
• /
• 2001

We propose an adaptive shaping controller equipped with the technologies of shaping and buffering VoIP packets arriving at the receiving end by the CAM-type controller. In order to conceal interarrival packet delay variation, the conventional jitter buffers force them to be too large, thereby causing the audio quality to suffer excessive delay. However, by using our proposed method, the delay caused by shaping operation dynamically increases or decreases on the level of jitter that exists with in the IP network. This makes the delay accommodates adaptively the network jitter condition. The less jitter network has the fewer delay the shaping controller requires for jitter elimination. And the CAM-type method generally makes the shaping operation faster and leads to processing packets in as little time as can. We analyse the packet loss and delay performance dependency on the average talk ratio and the number of jitter buffer entries in shaping controller. Surprising, we show that the average delay using our shaping controller is about 70msec. This performance is much better than with the delay equalization method which forces the receiving end to delay about 60msec.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.10
• /
• pp.126-134
• /
• 2006

This paper describes the development of an embedded wireless LAN controller which can be in parallel operated with an existing utility controller. The embedded controller mainly consists of Prism(R) 2.5 chip set and Atmega 128 microcontroller. In order to communicate over the network, the controller including TCP/IP stack (IP, TCP, UDP, and ICMP), telnet, and X/Z modem has been developed. For a specific application, we have proposed an special method to convert data structure between TCP/IP and X/Z modem and a data buffer algorithm to minimize the RAM memory usage. Finally, the correctness and performance of the protocols are tested and verified using $CommView^{(R)}\;and\;DU^{(R)}$. The development is satisfactorily operated only for 3,381 bytes of RAM usage without sacrificing interoperability between hosts.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.3 no.4
• /
• pp.3-9
• /
• 2010

Recently, Applications of BLDC motor have grown gradually in energy savings and controls of speed and torque. But most of BLDC motors need controller and driving circuits aside from motor, according to various situations. In this paper, it was designed for a embedded controller and motor including microprocessor that programmable intelligent control as various circumstances. And in order that the user conveniently use better than to use web browser using TCP/IP module in controller.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.1
• /
• pp.33-39
• /
• 2007

LonWorks over IP (LonWorks/IP) virtual device network (VDN) is an integrated form of LonWorks device network and IP data network. LonWorks/IP VDN can offer ubiquitous access to the information on the factory floor and make it possible for the predictive and preventive maintenance on the factory floor. Timely response is inevitable for predictive and preventive maintenance on the factory floor under the real-time distributed control. The network induced uncertain time delay deteriorates the performance and stability of the real-time distributed control system on LonWorks/IP virtual device network. Therefore, in order to guarantee the stability and to improve the performance of the networked distributed control system the time-varying uncertain time delay needs to be compensated for. In this paper, under the real-time distributed control on LonWorks/IP VDN with uncertain time delay, a control scheme based on disturbance observer and ZPETC(Zero Phase Error Tracking Controller) phase lag compensator is proposed and tested through computer simulation. The result of the proposed control is compared with that of internal model controller (IMC) based on Smith predictor and disturbance observer. It is shown that the proposed control scheme is disturbance and noise tolerant and can significantly improve the stability and the tracking performance of the periodic reference. Therefore, the proposed control scheme is well suited for the distributed servo control for predictive maintenance on LonWorks/IP-based virtual device network with time-varying delay.

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.3
• /
• pp.336-343
• /
• 1999

본 논문은 지능형 정보 제공 시스템(IP : Intelligent Peripheral)의 주요 소프트웨어 블록 중 하나인 자원 서비스 제어부의 구현 방법을 설명한 것이다. 본 연구의 자원 서비스 제어부는 ITU-T INCS-1에 정의된 특수자원 기능실체(SRF : Specialized Resource Function)의 상태모델을 실현시킨 소프트웨어 블록으로서 IP 하드웨어 구성요소의 하나인 특수자원교환기(SRS : Specialized Resource Switch) 의 CROS(Concurrent Realtime perating System)상에서 CHILL(CCITT High Level Programming Language)로 구현되었으며, 지능망서비스제어시스템(SCP : Service Control Point)이 보낸 지능망 응용프로토콜(INAP : Intelligent Network Application Protocol)오퍼레이션을 분석하여 IP가 보유한 자원 구동에 필요한 모든 절차를 제어한다. 또한 동시에 수신된 INAP오퍼레이션들에 대한 순서제어기능, 통계데이타 제공기능, 사용자 상호작용 종료 기능등을 제공한다. 제안된 구현기술은 자원서비스 제어부가 실제 자원을 동작시키는 IP 하드웨어 구성요소인 특수자원유닛(SRU : Specialized Resource Unit)을 클라이언트/서버형태로 유지하여 이들 자원의 상태를 관리함으로써 IP의 확장성을 보잔하여, 교환기 실시간 데이터베이스를 이용하여 IP가 생성하는 수만여개의 메시지를 효율적으로 관리할 수있다.