• Journal of the Ergonomics Society of Korea
• /
• v.23 no.1
• /
• pp.13-22
• /
• 2004

Due to economical or technological reasons. humans are responsible for inspection functions in many cases. Humans. however. are rarely perfect. thus allowing non-confirming parts to be processed. As the attributes of interest or the variety of products increases. the inspection system becomes less effective because of the sensory and cognitive limitations of human inspectors. Any means that can support or aid the human inspectors is necessary to compensate for inspection difficulty. Augmented reality (AR) offers a new approach in designing an inspection system as a means to augment the cognitive capability of inspectors by providing the 3D spatial proximity between two information channels. The experimental results suggest that AR might be an effective tool that reduces inspection time without sacrificing the measuring accuracy.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.6
• /
• pp.71-76
• /
• 2016

In this paper, we propose the mobile visual inspection information system using DGPS and portable range finder for levee safety inspection. Instead of existing visual inspection management method that is stored hand-written data, this system is designed to manage directly the visual inspection information using mobile devices in the field of levee. And through extracting accurate DGPS coordinates information about damage location of levee, this system is developed to ensure efficiency for the main task arising from the levee site such as inspection, maintenance and reinforcement. Furthermore, when damage has occurred at the point that inspector is not able to approach, this system can record the damage site data correctly, by converting data such as position, orientation and height of the damage point into the World Geodetic System coordinates. The position, orientation and height data was extracted automatically through the DGPS and portable range finder. And by applying the augmented reality method, this system was implemented for inspector to revisit the point of damage easily in order to perform the management, maintenance and reinforcement of the levee later.

• Journal of Navigation and Port Research
• /
• v.31 no.2
• /
• pp.151-157
• /
• 2007

After World Trade Center's Terror in 2001 and promulgating Maritime Transportation Security Act (MTSA, 2002) and Security and Accountability For Every Port Act (SAFE Port Act, 2006) in the United States, most of the attention on security of international transportation including marine carrier and facility has focused increasingly. Inspection stations in foreign seaport terminal including Busan, South Korea, have been installed by Container Security Initiative (CSI) and Customs Trade Partnership against Terrorism (C-TPAT). The inspection station, however, may directly and indirectly affect delay of truck turnaround time in the seaport, especially high and severe level of security. This paper was analysed a risk for the additional average delay of truck turnaround time incurring by the inspection station under the all level of security, C-TPAT and CSI. As a result of this risk analysis, the higher weighted inspection time based on raising security level, the less number of trucks to be inspected, which will derive high delay in the inspection station.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.574-576
• /
• 2010

In this paper, we propose a development of high speed inspection system which allows the inspection of width, definition and flaws in lead-frame using CCD camera. This system consists of the parts of lighting, inspection, lighting control, GUI and more and developed techniques used are lighting control, fast inspection algorithm and advanced measurement technique for improvement in resolution. The effectiveness in proposed method is proved by conducting field tests.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.7
• /
• pp.145-152
• /
• 2004

This paper proposed efficient manufacturing system using the OMM (on-machine measurement) system. The OMM system is software based 3D modeler for inspection on machine and it is interfaced tool machine with RS232C. The software is composed of two inspection modules that one is touch probe operating module and the other is laser displacement sensor operating module. The module for touch probe has need of inspection feature that extracted it from CAD data. Touch probe moves to workpiece by three operating modes as follows: manual, general and automatic mode. The operating module of laser displacement sensor is used inspection for profile and very small hole. An Advantage of this inspection method is to be able to execute on-line inspection during machining or after it. The efficiency of proposed system which can predict and definite the machining errors of each process is verified, so the developed system is applied to inspect the mold-base(cavity, core).

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.2
• /
• pp.42-49
• /
• 2021

In this paper, we proposes a study on the derivation of inspection factors for the periodic inspection of large buses equipped with AEBS and LDWS. we investigate the safety evaluation (NCAP) of domestic and foreign vehicles and safety standards for the two functions currently in operation and analyze the evaluation factors, measurement methods and evaluation scenarios and so on. In addition, the test scenario was derived by analyzing the vehicle safety evaluation data already held, Therefore, we use an real large bus and the inspection elements for the periodic inspection were derived.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.17 no.6
• /
• pp.337-346
• /
• 2022

This paper addresses the problem of vision-based ear loops ansd attachment inspection in mask production lines. This paper focuses on connections with ear loops and mask filter by an efficient combined approach. The proposed method used a template matching, shape detection and summation of histogram with preprocessing. We had a parameter for detecting defects heuristically. If the shape vertices are lower than the parameters our proposed method will find defective mask automatically. After finding normal masks in mask ear loops attachment status inspection algorithm our proposed method conducts attachment amount inspection. Our experimental results showed that the precision is 1 and the recall is 0.99 in the mask attachment status inspection and attachment amount inspection.

• Journal of Food Hygiene and Safety
• /
• v.35 no.2
• /
• pp.125-135
• /
• 2020

This study analyzed the content of eight biogenic amines (BAs), including histamine, in 198 fishery products (121 school-meal products and 77 distributed products) in Korea in 2019. Changes in BA content according to time, temperature, and salt treatment in Japanese Spanish mackerel, chub mackerel, and salmon were also observed. The average histamine content of 198 fishery products was 0.4±2.3 mg/kg, and all were within histamine criteria (200 mg/kg or less). As a result, the margin of exposure (MOE) was calculated to evaluate the risk of fishery products, and school-meal fishery products were evaluated as safe with a MOE of 1 or more. At 30℃, the histamine content of the fish increased rapidly to 144 mg/kg (Japanese Spanish mackerel, 36 h), and 308 mg/kg (chub mackerel, 24 h). When the Japanese Spanish mackerel, chub mackerel, and salmon were stored at 4℃, histamine was not detected for 3 days, and it was not detected for 14 days at -20℃. The BA content (histamines, etc.) of salt-treated Japanese Spanish mackerel and chub mackerel was lower than that of fish not treated with salt.

• Journal of Food Hygiene and Safety
• /
• v.37 no.3
• /
• pp.149-158
• /
• 2022

This study aimed to investigate pesticide residues in 160 stalk and stem vegetables marketed in Northern Gyeonggi-do. The QuEChERS method using GC-MS/MS and LC-MS/MS was employed to analyze the residues of 341 pesticides in the samples. The maximum or lower than the residue limit was recorded in 75 samples (46.9%), while 4 samples (2.5%) exceeded the maximum residue limit (MRL). Thirty-nine kinds of residual pesticides were detected including fungicides (14), insecticides (22), herbicides (2), and plant growth regulator (1). Carbendazim and pendimethalin were the most frequelntly detected pesticides. Fenitrothion, procymidone, and diazinon exceeded MRL in garlic chives, and Welsh onion. This indicated that these vegetables along with water celery should be constantly monitored.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.396-399
• /
• 2004

This study was performed to develop necessary Visual Inspection System for the PSC Bridges precision safety diagnosis which to enhance the efficiency and accuracy of visual inspection by using mobile PC and adopted IT. This system was constructed to the automatic visual inspection map generating program and the Visual Inspection System using mobile PC that predicted high efficiency.