• Journal of Advanced Navigation Technology
• /
• v.23 no.3
• /
• pp.228-236
• /
• 2019

Recently, multi-sensor integration techniques have been actively studied to obtain reliable and accurate navigation solution in GPS (Global Positioning System)-denied harsh environments such as urban canyons, tunnels, and underground roads. In this paper, we propose a low-cost ultrasonic-speedometer utilizing the characteristics of the ultrasonic propagation. An efficient integrated INS (inertial navigation system)/ultrasonic-speedometer navigation system is also proposed to improve the accuracy of positioning in GPS-denied environments. To evaluate the proposed system, car experiments with field-collected measurements were performed. By the experiment results, it was confirmed that the proposed INS/ultrasonic-speedometer system bounds the positioning error growth effectively even though GPS signal is blocked more than 10 seconds and a low-cost MEMS IMU (micro electro mechanical systems inertial measurement unit) is utilized.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2075-2077
• /
• 2001

For precise positioning, GPS carrier measurements are often used. In this case, accurate position having mm${\sim}$cm error can be obtained. For 3D positioning, in CDGPS, more than five carrier phase measurements are required. When GPS signals are blocked or carrier phase measurements are insufficient, it cannot provide positioning solution. By integrating CDGPS with INS, continuity of positioning solution can be guaranteed. However, when a vehicle moves in low speed or in stationary, the CDGPS/INS integrated system is difficult to compensate INS attitude errors because GPS velocity error become relatively lange. In this paper, we used the 3D attitude GPS receiver to compensate the INS attitude error. By field experiments, it is shown that the proposed integration system maintains the navigation performance even when a vehicle is in low speed or GPS signal is blocked for a period of time.

• Journal of Mechanical Science and Technology
• /
• v.19 no.8
• /
• pp.1529-1543
• /
• 2005

Recently an unmanned aerial vehicle (UAV) has been widely used for military and civil applications. The role of a navigation system in the UAV is to provide navigation data to the flight control computer (FCC) for guidance and control. Since performance of the FCC is highly reliant on the navigation data, a fault in the navigation system may lead to a disastrous failure of the whole UAV. Therefore, the navigation system should possess a fault detection and isolation (FDI) algorithm. This paper proposes an attitude determination GPS/INS integrated navigation system with an FDI algorithm for a UAV. Hardware for the proposed navigation system has been developed. The developed hardware comprises a commercial inertial measurement unit (IMU) and the integrated navigation package (INP) which includes an attitude determination GPS (ADGPS) receiver and a navigation computer unit (NCU). The navigation algorithm was implemented in a real-time operating system with a multi-tasking structure. To evaluate performance of the proposed navigation system, a flight test has been performed using a small aircraft. The test results show that the proposed navigation system can give accurate navigation results even in a high dynamic environment.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.445-447
• /
• 1998

This paper shows simulation results for stability and performance of two INS/GPS integration systems. First, the code tracking error of GPS receiver is analyzed by spectrum analysis and simulated for the tight and loose INS/GPS integrations. Next, stability of the integrated systems are simulated using root locus method. As loop filter in the GPS receiver, passive filter and active filter are used and compared.

• Korean Journal of Geomatics
• /
• v.3 no.2
• /
• pp.129-140
• /
• 2004

This paper addresses solutions th the challenges of carrier phase integer ambiguity resolution and cycle slip detection/identification, for maintaining high accuracy of an integrated GPS/Pseudolite/INS system. Such a hybrid positioning and navigation system is an augmentation of standard GPS/INS systems in localized areas. To achieve the goal of high accuracy, the carrier phase measurements with correctly estimated integer ambiguities must be utilized to update the system integration filter's states. The contribution presents an effective approach to increase the reliability and speed of integer ambiguity resolution through using pseudolite and INS measurements, with special emphasis on reducing the ambiguity search space. In addition, an algorithm which can effectively detect and correct the cycle slips is described as well. The algorithm utilizes additional position information provided by the INS, and applies a statistical technique known as th cumulative-sun (CUSUM) test that is very sensitive to abrupt changes of mean values. Results of simulation studies and field tests indicate that the algorithms are performed pretty well, so that the accuracy and performance of the integrated system can be maintained, even if cycle slips exist in the raw GPS measurements.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.4
• /
• pp.615-625
• /
• 2012

GPS attitude outputs or carrier phase observables can be effectively utilized to compensate the attitude error of the strapdown inertial navigation system. However, when the integer ambiguity is not correctly resolved and/or a cycle slip occurs, an erroneous GPS output can be obtained. If the erroneous GPS output is applied to the attitude determination GPS/INS (ADGPS/INS) integrated navigation system, the performance of the system can be degraded. This paper proposes an ADGPS/INS integration system using the triple difference carrier phase observables. The proposed integration system contains a cycle slip detection algorithm, in which the inertial information is combined. Computer simulations and flight test were performed to verify effectiveness of the proposed navigation system. Results show that the proposed system gives an accurate and reliable navigation solution even when the integer ambiguity is not correctly resolved and the cycle slip occurs.

• Journal of the Korean Institute of Navigation
• /
• v.20 no.1
• /
• pp.11-26
• /
• 1996

On this paper, the traditional methods for the measurement of ship's maneuverabilities during the sea-trial of newly built ship are summarized and new methods for the same measurement using Integrated Navigation System and GPS are introduced. After various sea-trials of training ship "HANNARA" which are equipped with modern INS and GPS system, the results are compared and analysed. The purpose of this paper is to present more accurate methods of measurement of ship's maneuverabilities during sea-trial using INS and GPS which are gradually becoming the basic navigational equipments on many newly constructed vessels.d vessels.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.7
• /
• pp.702-710
• /
• 2008

In this paper, the observability of the INS/GPS integrated system for a land vehicle is analyzed on measurements and different filters with respect to the measurements are designed. In the stationary case, it is shown that horizontal accelerometer biases and vertical attitude errors and gyro biases are unobservable. An 8-state filter is designed based on the observability analysis. When GPS signal is available, a 15-state filter is used with position and velocity measurements. To estimate the INS errors even in the case that GPS signal is blocked a filter is designed in consideration of the non-holonomic constraints of a land vehicle. In this case, the horizontal position and velocity errors and vertical attitude error are unobservable. However, a 12-state filter including the velocity states is designed to estimate the accelerometer biases. When GPS signal recovers, a 9-state filter is used excluding the sensor biases. This paper presents a multi-dimensional filter that switches the four filters according to the usable measurements and maneuver environments. A simulation is carried out to verify the performance of the proposed filter.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.493-495
• /
• 2004

In this paper, shows a research in accordance with the design the implementation of the localization system for mobile robot using INS(Inertial Navigation System) and GPS(Global Positioning System). First, a Strapdown Inertial Navigation System : SDINS is designed and implemented for low speed walking robot, by modifying Inertial Navigation System which is widely used for rocket, airplane, ship and so on. In addition, thesis proposes the localization of robot with the method of loosely coupled method by using Kalman Filter with INS/GPS integrated system to utilize assumed position and steed data from GPS.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.6
• /
• pp.481-487
• /
• 2013

In GPS(Global Positioning System)/INS(Inertial Navigation System) integrated navigation systems, GPS antennas and an inertial measurement units are usually installed outside and inside of the vehicle, respectively. By the difference of installed locations, performance of GPS/INS integrated navigation systems is affected by lever arm errors. For more accurate navigation, lever arm errors need to be compensated correctly since it directly affects the accuracy of navigation states. This paper proposes an effective lever arm error compensation method that utilizes velocity measurements of GPS and INS. By an experiment, feasibility of the proposed algorithm is verified. It is also shown that lever arm compensation is especially important when vehicles are experiencing rotational movements.