• Nuclear Engineering and Technology
• /
• 제55권1호
• /
• pp.310-323
• /
• 2023

The k-eigenvalue neutronics/thermal-hydraulics coupling calculation is a key issue for reactor design and analysis. Jacobian-free Newton-Krylov (JFNK) method, featured with super-linear convergence rate and high efficiency, has been attracting more and more attention to solve the multi-physics coupling problem. However, it may converge to the high-order eigenmode because of the multiple solutions nature of the k-eigenvalue form of multi-physics coupling issue. Based on our previous work, a modified JFNK with a line search method is proposed in this work, which can find the fundamental eigenmode together with thermal-hydraulics feedback in a wide range of initial values. In detail, the existing modified JFNK method is combined with the line search strategy, so that the intermediate iterative solution can avoid a sudden divergence and be adjusted into a convergence basin smoothly. Two simplified 2-D homogeneous reactor models, a PWR model, and an HTR model, are utilized to evaluate the performance of the newly proposed JFNK method. The results show that the performance of this proposed JFNK is more robust than the existing JFNK-based methods.

• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.233-240
• /
• 2024

The wall friction correlations of oscillatory natural circulation loops are highly loop-specific, making it difficult to perform 1-D system simulations before obtaining specific experimental data. To better predict the friction characteristics, the nonlinear dynamics of a toroidal single-phase natural circulation loop were numerically investigated, and the transition effect was considered. The k-k_L-ω transitional turbulence and k-ω SST turbulence models were used to compute the flow characteristics of the loop under different heating powers varying from 0.48 to 1.0 W/cm², and the results of both models were compared with previous experiments. The mass flow rates and friction factors predicted by the k-k_L-ω model showed a better agreement with the experimental data than the results of the k-ω SST model. The oscillation frequencies calculated using both models agreed well with the experimental data. The k-k_L-ω transitional turbulence model provided better friction-factor predictions in oscillatory natural circulation loops because it can reproduce the temporal and spatial variation of the wall shear stress more accurately by capturing the movement of laminar, transition turbulent zones inside unstable natural circulation loops. This study shows that transition effects are a possible explanation for the highly loop-specific friction correlations observed in various oscillatory natural circulation loops.

• Nuclear Engineering and Technology
• /
• 제55권4호
• /
• pp.1350-1364
• /
• 2023

2D/1D coupling method is an important neutron transport calculation method due to its high accuracy and relatively low computation cost. However, 2D/1D coupling method may diverge especially in small axial mesh size. To analyze the convergence behavior of 2D/1D coupling method, a Fourier analysis for k-eigenvalue neutron transport problems is implemented. The analysis results present the divergence problem of 2D/1D coupling method in small axial mesh size. Several common attempts are made to solve the divergence problem, which are to increase the number of inner iterations of the 2D or 1D calculation, and two times 1D calculations per outer iteration. However, these attempts only could improve the convergence rate but cannot deal with the divergence problem of 2D/1D coupling method thoroughly. Moreover, the choice of axial solvers, such as DGFEM SN and traditional SN, and its effect on the convergence behavior are also discussed. The results show that the choice of axial solver is a key point for the convergence of 2D/1D method. The DGFEM SN based 2D/1D method could converge within a wide range of optical thickness region, which is superior to that of traditional SN method.

• 인터넷정보학회논문지
• /
• 제25권4호
• /
• pp.1-6
• /
• 2024

OMNeT++(Objective Modular Network Testbed in C++)는 네트워크 시뮬레이터를 구축하기 위한 확장 가능하고 모듈화된 C++ 시뮬레이션 라이브러리 및 프레임워크이다. OMNeT++는 센서 네트워크, 인터넷 프로토콜 등 다양한 분야에서 독립적으로 개발된 시뮬레이션 모델을 제공한다. 이를 통해 연구자들은 원하는 시뮬레이션에 필요한 도구와 기능을 사용할 수 있다. OMNeT++는 NED(Network Description) 언어를 사용하여 노드와 네트워크 토폴로지 등을 정의하고, C++ 언어를 통해 정의된 네트워크 객체의 생성과 동작을 구현할 수 있다. 더욱이, INET 프레임워크는 OMNeT++ 시뮬레이션 환경을 위한 오픈 소스 모델 라이브러리로, 다양한 네트워킹 프로토콜과 구성요소에 대한 모델을 포함하고 있어 새로운 네트워크 프로토콜의 설계와 검증에 용이하다. 본 논문은 기초 연구자들을 위해 OMNeT++의 개념과 INET 프레임워크를 활용한 네트워크 시뮬레이션 절차를 설명하여, 이를 통해 다양한 네트워크 시나리오를 모델링하고 분석하는 데 도움을 주고자 한다.

• Nuclear Engineering and Technology
• /
• 제52권3호
• /
• pp.581-588
• /
• 2020

The membrane fouling is an important problem for FO applied to the radioactive wastewater treatment. The FO fouling characteristics for simulated radioactive wastewater treatment was investigated. On-line cleaning by deionized (DI) water and external cleaning by ultrasound and HCl were applied for the fouled membrane. The effectiveness and foulant removing amount by each-step cleaning were evaluated. The membrane fouling was divided into three stages. Co(II), Sr(II), Cs(I), Na(I) were all found deposited on both active and support layers of the membrane surface, resulting in membrane surface became rougher and more hydrophobic, which increased membrane resistance. On-line cleaning by DI water recovered the water flux to 69%. HCl removed more foulants than ultrasound.

• 한국멀티미디어학회논문지
• /
• 제8권11호
• /
• pp.1472-1482
• /
• 2005

TOE (TCP/IP Offload Engine)는 부하가 많은 대규모 네트워크 서버에서 TCP/IP 프로토콜 처리의 부담을 줄이기 위해 고안된 하드웨어 장치이다. 본 논문에서는 TOE (TCP Offload Engine)를 사용하는 대규모 멀티미디어 서버를 위한 소켓 인터페이스 계층의 설계 및 구현에 대해 다룬다. 제안된 소켓 인터페이스 계층은 리눅스 운영체제 상에서 커널 모듈로 설계, 구현되었으며, BSD소켓 계층과 INET소켓 계층 사이에 존재하면서 응용 프로그램의 소켓 관련 요청을 TOE나 기존 INET소켓 계층으로 전달하는 역할을 한다. 본 논문에서 제안한 소켓 인터페이스는 소켓을 통해 TOE를 사용하는 응용 프로그램에 대해서 모든 표준 소켓 입출력 API와 파일 입출력 관련 API를 그대로 제공하고, 기존 응용 프로그램들에 대해서도 수정 없이 TOE의 기능을 그대로 사용할 수 있는 바이너리 수준의 호환성을 제공하며, 한 시스템에서 TOE와 이더넷 NIC을 동시에 사용할 수 있게 된다.

• Nuclear Engineering and Technology
• /
• 제50권1호
• /
• pp.211-215
• /
• 2018

Chitosan was modified by gamma radiation-induced grafting with maleic acid and then used for the removal of cobalt ions from aqueous solutions. Chitosan-g-maleic acid was characterized by Fourier Transform infrared spectroscopy (FT-IR). The effect of the dose (1-5 kGy) and monomer concentration (0.3-1.3%, m/v) on the grafting ratio was examined. The adsorption kinetics and isotherms were also investigated. The results showed that the optimal dose for grafting was 2 kGy. When monomer concentration was within the range of 0.3-1.3% (m/v), the grafting ratio increased almost linearly. For the adsorption of cobalt ions by chitosan-g-maleic acid beads, the pseudo second-order kinetic model ($R^2=0.99$) and Temkin isotherm model ($R^2=0.96$) were able to fit the experimental data reasonably well. The equilibrium adsorption capacity of cobalt ions increased from 2.00 mg/g to 2.78 mg/g after chitosan modification.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.323-326
• /
• 1998

본 연구는 boron-doped 실리콘 기판에 heavy 인온인 비소를 먼저 이온 주입시키고 비소의 주입에 의해 실리콘 표면이 손상된 영역에 다시 인을 이온 주입시켰을때, 인의 확산을 관찰하기 위해 microtec 시뮬레이터를 통해 모의공정실험을 실행하였다. 손상된 비정질의 실리콘 기판에서 열처리 전과 inet(N/sub 2/) 분위기에서 인은 느리게 확산을 하였다. 그렇지만 dry와 wt oxidation 열처리 분위기에서는 의의 확산 속도가 증가됨 (OED:oxidation-enhanced idfusion)을 관찰되었다. 실리콘 기판에서 인의 확산을 관찰하기 위해 ICECREM 시뮬레이터를 사용하여 앞의 경우와 동일하게 먼저 비소를 주입하여 실리콘 표면에 손상을 입히고 그 다음 공정에서 인을 주입하였을 때, 열처리 전과 inet, dry 산화분위기에서는 비정질의 실리콘 기판에 이온 주입한 경우와 동일하게 의의 확산 속도가 증가하였지만, wet 산화분위기에서는 오히려 dry 산화분위기에서 보다 확산이 늦어짐이 관찰되었다.

• Nuclear Engineering and Technology
• /
• 제49권3호
• /
• pp.534-540
• /
• 2017

The adsorption of uranium (VI) by calcium alginate beads was examined by batch experiments. The effects of environmental conditions on U (VI) adsorption were studied, including contact time, pH, initial concentration of U (VI), and temperature. The alginate beads were characterized by using scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy. Fourier transform infrared spectra indicated that hydroxyl and alkoxy groups are present at the surface of the beads. The experimental results showed that the adsorption of U (VI) by alginate beads was strongly dependent on pH, the adsorption increased at pH 3~7, then decreased at pH 7~9. The adsorption reached equilibrium within 2 minutes. The adsorption kinetics of U (VI) onto alginate beads can be described by a pseudo first-order kinetic model. The adsorption isotherm can be described by the Redlich-Peterson model, and the maximum adsorption capacity was 237.15 mg/g. The sorption process is spontaneous and has an exothermic reaction.

• Nuclear Engineering and Technology
• /
• 제52권2호
• /
• pp.328-336
• /
• 2020

Cesium is a major product of uranium fission, which is the most commonly existed radionuclide in radioactive wastes. Various technologies have been applied to separate radioactive cesium from radioactive wastes, such as chemical precipitation, solvent extraction, membrane separation and adsorption. Crown ethers and calixarenes derivatives can selectively coordinate with cesium ions by ion-dipole interaction or cation-π interaction, which are promising extractants for cesium ions due to their promising coordinating structure. This review systematically summarized and analyzed the recent advances in the crown ethers and calixarenes derivatives for cesium separation, especially focusing on the adsorbents based on extractants for cesium removal from aqueous solution, such as the grafting coordinating groups (e.g. crown ether and calixarenes) and coordinating polymers (e.g. MOFs) due to their unique coordination ability and selectivity for cesium ions. These adsorbents combined the advantages of extraction and adsorption methods and showed high adsorption capacity for cesium ions, which are promising for cesium separation The key restraints for cesium separation, as well as the newest progress of the adsorbents for cesium separation were also discussed. Finally, some concluding remarks and suggestions for future researches were proposed.