• The Korean Journal of Ceramics
• /
• v.3 no.2
• /
• pp.116-123
• /
• 1997

A chemically stabilized $\beta$-cristobalite, which is stabilized by stuffing cations of $Ca^{2+}$ and $Al^{3+}$, was prepared by a solution-polymerization route employing Pechini resin or PVA solution as a polymeric carrier. The polymeric carrier affected the crystallization temperature, morphology of calicined powder, and particle size distribution. In case of the polyvinyl alcohol (PVA) solution process, a fine $\beta$-cristobalite powder with a narrow particle size distribution (average particle size : 0.3$\mu\textrm{m}$) and a BET specific surface area of 72 $\m^2$/g was prepared by an attrition-milling for 1 h after calcination at 110$0^{\circ}C$ for 1h. Wider particle size distribution and higher specific surface area were observed for the $\beta$-cristobalite powder derived from Pechini resin. The cubie(P1-to-tetraganalb) phase transformation in polynystalline $\beta$-cristobalite was induced at approximately 18$0^{\circ}C$. Like other materials showing transformation toughening, a critical size effect controlled the $\beta$-to-$\alpha$ transformation. Densifed cristobalite sample had some cracks in its internal texture after annealing. The cracks, occurred spontaneoulsy on cooling, were observed in the sample with an average grain sizes of 4.0 $\mu\textrm{m}$ or above. In case of the sintered cristobalite having a composition of CaO.$2Al_2O_3$.40SiO$_2$, small amount of amorphous phase and slow grain growth during annealing were observed. Shear stress-induced transformation was also observed in ground specimen. Cristobalite having a composition of CaO.2Al2O3.80SiO2 showed a more sensitive response to shear stress than the CaO.$2Al_2O_3$.40SiO$_2$ type cristobalite. Shear-induced transformation resulted in an increase of volume about 13% in $\alpha$-cristobalite phase on annealing for above 10 h in the case of the former composition.

• Korean Journal of Materials Research
• /
• v.26 no.6
• /
• pp.325-331
• /
• 2016

This paper presents a study of the tensile properties of austenitic high-manganese steel specimens with different grain sizes. Although the stacking fault energy, calculated using a modified thermodynamic model, slightly decreased with increasing grain size, it was found to vary in a range of $23.4mJ/m^2$ to $27.1mJ/m^2$. Room-temperature tensile test results indicated that the yield and tensile strengths increased; the ductility also improved as the grain size decreased. The increase in the yield and tensile strengths was primarily attributed to the occurrence of mechanical twinning, as well as to the grain refinement effect. On the other hand, the improvement of the ductility is because the formation of deformation-induced martensite is suppressed in the high-manganese steel specimen with small grain size during tensile testing. The deformation-induced martensite transformation resulting from the increased grain size can be explained by the decrease in stacking fault energy or in shear stress required to generate deformation-induced martensite transformation.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.411-414
• /
• 2005

It is reported that $\varepsilon$ (HCP) and $\gamma$ (FCC) phases of a Fe-17Mn alloy transform to $\alpha'$ phase, which has BCC structure, under a deformation condition. In this study, we investigated the effect of strain-induced-transformed $\alpha'$ phase on sliding wear of the Fe-17Mn alloy that originally had e and y phases. Wear tests of the materials were carried out using a pin-on-disk wear tester at various loads of 0.5N-50N under a constant sliding speed condition of 0.38m/s against glass $(83\%\;SiO_2)$ beads. The sliding distance and radius were loom and 9 mm, respectively. Wear rate of the Fe-17Mn alloy was calculated by dividing the weight loss, measured to the accuracy of $10^{-5}g$ by the measured specific gravity and sliding distance. Worn surface and wear debris of the specimens were examined using an SEM and XRD. During the wear, $\alpha'$ phase of BCC structure was formed by strain-induced transformation when the applied wear load exceeded critical values. The $\alpha'$ phase formed by the strain induced transformation increased the wear rate of the Fe-17Mn alloy.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.10a
• /
• pp.107-112
• /
• 2003

형상기억합금(shape memory alloy; SMA)은 소성가공을 통하여 원하는 형태로 변형시킨 이후에도(현재로서는 최대 10%미만의 변형) 일정조건의 열을 가하면 원래의 형상으로 복원되는 합금을 말한다. 형상기억효과는 고상(solid state)에서의 금속조직이 오스테나이트(austenite: 이하 A 또는 B2상)로부터 마르텐사이트(martensite: 이하 M 또는 B19'상)로, 다시 역으로 마르텐사이트에서 오스테나이트로의 변태에 기인되는 것으로 밝혀지고 있으며 이러한 변태는 온도유기변태(temperature induced transformation)와 응력유기변태(stress induced transformation)로 분류할 수 있다.(중략)

• Journal of Information Display
• /
• v.10 no.2
• /
• pp.76-79
• /
• 2009

In Joule-heating-induced crystallization, solid-to-solid or liquid-to-solid phase transformation could occur. It was found that novel physical phenomena that randomly nucleated liquid seeds, followed by rapid solidification in an amorphous matrix, during the Joule-heating-up period play an important role especially in liquid-to-solid transformation. Under some processing conditions, super-grains sized 6-8 ${\um}m$ were produced by the lateral growth from the initial seeds, without any artificially control.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.6 no.2
• /
• pp.1-8
• /
• 2002

Let $T_{\phi}$ be a generalized Gauss transformation and $[a_1,\;a_2,\;{\cdots}]_{T_{\phi}}$ be a symbolic representation of $x{\in}[0,\;1)$ induced by $T_{\phi}$, i.e., generalized continued fraction expansion induced by $T_{\phi}$. It is shown that the distribution of relative frequency of [$k_1,\;{\cdots},\;k_n$] in $[a_1,\;a_2,\;{\cdots}]_{T_p}$ satisfies Central Limit Theorem where $k_i{\in}{\mathbb{N}}$ for $1{\leq}i{\leq}n$.

• Preventive Nutrition and Food Science
• /
• v.4 no.4
• /
• pp.255-259
• /
• 1999

The anticarcinogenic effects of the methanol extracts from leek (buchu in Korean) kimchi and Korean cabbage kimchi were evaluated using cytotoxicity and transformation tests in C3H/10T1/2 cells. Various fractions of the 6-day fermented leek kimchi at 15$^{\circ}C$, hexane, methanol soluble, dichloromethane, ethyl acetate, butanol and aqueous fraction, were also studied in the same system. The inhibitory effect of the leek kimchi(6-day fermented at 15$^{\circ}C$, pH 4.29) was higher than that of the Korean cabbage kimchi(4-day fermented at 15$^{\circ}C$, pH 4.21) on the cytotoxicity induced by 3-methylcholanthrane (MCA) in the C3H/10T1/2 cell system. While the MCA-treated culture(control) formed 21.0 foci of type II plus III in C3H/10T1/2 cells, 100$\mu\textrm{g}$/ml of the methanol extract of the leek kimchi and that of the 4-day fermented Korean cabbage kimchi treated cultures reduced the formation of type II plus III foci to 7.4 and 11.3, respectively. Among the fractions of the leek kimchi, the dichloromethane fraction showed the highest inhibitory effect on MCA-induced cytotoxicity in C3H/10T1/2 cells. Fifty $\mu\textrm{g}$/ml of dichloromethane fraction from the leek kimchi suppressed the MCA-induced cytotoxicity by 77%. On the transformation test using MCA, the dichloromethane fraction considerably reduced the formation of type II plus III foci, especially thpe III foci. When 50$\mu\textrm{g}$/ml of dichloromethane fraction from the leek kimchi was treated, the numbers of type III foci mediated by MCA were decreased to 1.7 compared to 10 for the control. These results indicate that leek kimchi has stronger anticarcinogenic effects than Korean cabbage kimchi and that the dichloromethane fraction of the leek kimchi may contain the major compound(s) that suppress the carcinogenesis in the eukaryotic cells.

• Wind and Structures
• /
• v.23 no.5
• /
• pp.421-447
• /
• 2016

Wind-induced and earthquake-induced excitations on tall structures can be effectively controlled by Tuned Liquid Damper (TLD). This work presents a numerical simulation procedure to study the performance of tuned liquid tank- structure system through ${\sigma}$-transformation based fluid-structure coupled solver. For this, a 'C' based computational code is developed. Structural equations are coupled with fluid equations in order to achieve the transfer of sloshing forces to structure for damping. Structural equations are solved by fourth order Runge-Kutta method while fluid equations are solved using finite difference based sigma transformed algorithm. Code is validated with previously published results. The minimum displacement of structure is observed when the resonance condition of the coupled system is satisfied through proper tuning of TLD. Since real-time excitations are random in nature, the performance study of TLD under random excitation is also carried out in which the Bretschneider spectrum is used to generate the random input wave.

• Applied Microscopy
• /
• v.43 no.1
• /
• pp.40-45
• /
• 2013

Phase transformation by the Mn-deprivation was observed in the high-Mn twinning-induced plasticity-aided steel. Mn-depletion was induced by the formation of Mn-O oxide during the dew-point control process at temperature above $-20^{\circ}C$, which changed austenitic parent phase to multi-grained ferrite. Mixture of Al-O, Al-Mn-Si-O oxides were observed at the grain boundaries of transformed ferrite.

• Korean Journal of Materials Research
• /
• v.17 no.1
• /
• pp.37-42
• /
• 2007

The effects of immersion time in the liquid nitrogen and deformation-induced martensitic transformation on the behavior of austenite stainless steels used for the hydrogen storage tank of auto-mobile at cryogenic temperature were investigated. With increasing of immersion time in the liquid nitrogen, the tensile strength of all austenite stainless steels at cryogenic temperature was increased because the martensite transformation of unstable austenite. The restraint of crack generation ana transmission also increased the tensile strength by the active ${\alpha}'$ transformation. The elongation decreasing of 321 steel is not the mechanical deformation of austenite phase but the stress induced martensite phase during the tensile test.