• Journal of Korean Society on Water Environment
• /
• v.39 no.4
• /
• pp.269-287
• /
• 2023

The genus-level biotic index of benthic macroinvertebrates (Benthic Macroinvertebrates Genus Index, BMGI) was developed and applicated based on the data collected from 13,347 sampling units of 814 sites from 2010 to 2021 in Korea. Tolerant values of 274 indicator taxa were established by analyzing the relationship between the relative frequency and abundance of indicator taxa and the water quality index considering biochemical oxygen demand (BOD₅), total suspended solids (TSS), and total phosphorus (T-P). BMGI showed a slightly higher correlation with water quality than the species-level biotic index (Benthic Macroinvertebrates Index, BMI) that was developed and applied in Korea. Although the BMGI does not contain species-level information, the reason why BMGI shows higher applicability than BMI seems to be due to the increase in the number of indicator taxa and the decrease in the misidentification of immature aquatic insects. The coefficient of determination in multiple regression with BOD₅, TSS, and TP for BMGI was 0.62 in the long-term averaged data of 814 sites, and the standardized coefficient of BOD₅ was -0.46, TSS was -0.17 and T-P was -0.21, respectively. As a result of the evaluation by BMGI, of the 814 sites, 38% were in good, 25% in fair, and 37% in poor condition.

• Korean Journal of Ecology and Environment
• /
• v.56 no.4
• /
• pp.393-405
• /
• 2023

This study was conducted to select indicators for assessing national biodiversity. For this purpose, 140 biodiversity-related indicators were identified as a result of inventorying biodiversity-related indicators used in Korea and abroad, and when these indicators were applied to the pressure, status, and response indicator system, it was found that status indicators accounted for the largest number of indicators, with 29 pressure, 59 status, and 44 response. We also categorized the status indicators into genes, species, habitat, function, and quality, and found that species and habitat indicators accounted for the majority. Pressure indicators were categorized into direct exploitation, pollution, alien species, climate change, and habitat change. As a result, it was found that direct exploitation and pollution accounted for most of the pressure indicators. In addition, this study used internationally used indicator selection criteria to establish criteria for selecting domestic biodiversity assessment indicators. Using this list of indicators and indicator selection criteria, we evaluated the prioritization of domestically applicable biodiversity indicators through relevant expert consultations. 1) Vegetation class, 2) Land cover indicators, and 3) Change of protected area ranked highly. In fact, these indicators have been used in many studies due to the availability of assessable data. However, most of the highly scored indicators are based on ecosystem area, and further consideration of ecosystem functions and components(species) is needed.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.31 no.3
• /
• pp.103-118
• /
• 2023

An indicator system is an effective way to monitor ongoing safety status. Current aviation safety measurements account for many qualitative technical and lagging indicators. Conversely, quantitative and leading indicators have only a tiny proportion. This research added more quantitative leading indicators and reviewed them to harmonize lagging and leading indicators to measure airport safety and provide an index. The South Korean national gate, Incheon International Airport's indicators, were applied as primary data to verify this research practically. Then, examples from International and national authorities were reviewed and extracted for use. Fifty-five safety specialists participated in the focus group discussion and three rounds of the Delphi survey. Finally, 51 sub-indicators were newly chosen. After this process, weights for each indicator could be assigned using the AHP (Analytical Hierarchy Process) to provide an integrated index. The result of the simulation with newly added indicators in the past five years (2020-2022) reliable trend showed in indicators and integrated index. Moreover, this allows monitoring the status of the details of indicators and holistic insight. This study considered that it is more suitable for a single company or service provider to use it according to the exact situation than in a macro- and general-purpose at the country or regional level.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.3
• /
• pp.94-102
• /
• 2010

Carbon Neutral is one of the magnifying pan-governmental tasks which aim for stabilizing pan-global ecosystem. The purpose of this study is to estimates carbon neutral degree in cities by using capacity of carbon storage, which is carbon sinks, on forest and to develop an indicator that could be utilized in establishing policy related to climate change respond. When the carbon emitted from city has been absorbed or stored, the value of the indicator aiming to achieve carbon neutral could be drawn. The result and implication are as follows. First, while the annual amount of carbon emission in Gyeonggi S city was 18,787 thousand (tons), which was the highest, that of Gyeongbuk U city indicated the lowest with approximately 112 thousand (tons). Second, Gyeongbuk U city represented the largest capacity of annual carbon storage with about 16,748 thousand (tons), whereas the smallest figure was shown in Gyeonggi B city with 151 thousand (tons). Third, as result of the estimation of carbon neutral degree, the value of the indicator in Gyeonggi B city was 3% referring the lowest point, while that of other cities demonstrated over 100%. Forth, it has the possibility to suggest the fixed quantity when the plan for achieving carbon neutral of city is being processed. In the near future, after the completion of the construction projects of greenhouse gas inventory in all local governments, by utilizing the relative dates, the value of the indicator can be calculated and a more general conclusion could be drawn. Moreover, as expanding case studies to all domestic cities, generalness is in need.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.6
• /
• pp.1015-1027
• /
• 2009

Many problems of confounding and identifiability for polynomial models in an experimental design can be solved using methods of algebraic geometry. The theory of $Gr\ddot{o}bner$ basis is used to characterize the design. In addition, a fractional factorial design can be uniquely represented by a polynomial indicator function. $Gr\ddot{o}bner$ bases and indicator functions are powerful computational tools to deal with ideals of fractions based on each different theoretical aspects. The problem posed here is to give how to move from one representation to the other. For a given fractional factorial design, the indicator function can be computed from the generating equations in the $Gr\ddot{o}bner$ basis. The theory is tested using some fractional factorial designs aided by a modern computational algebra package CoCoA.

• Journal of Environmental Science International
• /
• v.20 no.10
• /
• pp.1213-1220
• /
• 2011

This study aims at choosing indicators to measure the effect of utilizing biotop map, and analyzing its effect by an indicator from the perspective of performer. The Primary performance indicators are made through specialist survey using SMART. As a result, three indicators are chosen: "Discussion of the period of an environmental effects evaluation(reduced effect)", "Plan and execution of environment and ecology plan in an urban development site", "Minimizing ecological damage in an urban development." The result in each indicator is as follows. The indicator of discussion of the period of an environmental effects evaluation(reduced effect), the average reduction rate in statistically meaningful level reduced 6.08% and 11.64% respectively in 2004-2005. In this period, environment information system was established and the reduction effect is shown in this period by reinforcing environment effect estimation using biotop map. As to the indicator of utilizing biotop map in an urban development site, the Seongnam P site case shows that biotop map was used when they set up an development plan. In case of minimizing ecological damage in an urban development, the Gwangjingu G-dong case shows that it was used to appoint preservation sit, and mediate development restrict area. Accordingly, the biotop map utilizing effect is confirmed through core performance indicators and verification of the indicators using SMART. The further research is encouraged to find evaluate indicators and verify the effect quantitatively to increase the use of biotop map.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.2
• /
• pp.179-186
• /
• 2015

In the indoor location estimation system, which has recently been actively studied, the received signal strength indicator contains a high level of noise when measuring the signal strength in the range between two nodes consisting of a receiver and a transceiver. To minimize the noise level, this paper proposes an improved adaptive smoothing filter that provides different exponential weights to the current value and previous averaged one of the data that were obtained from the nodes, because the characteristic signal attenuation of the received signal strength indicator generally has a log distribution. The proposed method can effectively decrease the noise level by using a feedback filter that can provide different weights according to the noise level of the obtained data and thus increase the accuracy in the distance and location without an additional filter such as the link quality indicator, which can verify the communication quality state to decrease the range errors in the indoor location recognition using ZigBee based on IEEE 802.15.4. For verifying the performance of the proposed improved adaptive smoothing filter, actual experiments are conducted in three indoor locations of different spatial sections. From the experimental results, it is verified that the proposed technique is superior to other techniques in range measurement.

• Quality Improvement in Health Care
• /
• v.7 no.2
• /
• pp.204-216
• /
• 2000

Background : There has been a concern that the quality of care provided to end-stage renal disease (ESRD) patients in the United States may not be as good as recommended. This paper illustrates a composite measure to assess, the quality of care received by ESRD patients undergoing in-center hemodialysis by incorporating outcomes for 4 major treatment areas. The 4 treatment areas are: dialysis treatments, anemia control, nutritional management, and blood pressure control. Methods : The major data source for the study was the United States Renal Data System (USRDS) Dialysis Morbidity and Mortality Study Wave 1 (DMMS-1) d Sixteen categories of a composite quality indicator were constructed by combining 4 dichotomous variables (16=2*2*2*2). representing the optimal vs. less than optimal level of outcome for each of the 4 treatment outcome measure respectively. Optimal outcome level for each treatment area was defined based on the recommendation from the National Kidney Foundation: (a) delivered dialysis doses (Kt/V) ${\geq}$ 1.2; (b) hematocrit level ${\geq}$ 30%; (c) serum albumin concentration ${\geq}$ 3.8g/dl ; and (d) blood pressure of <140 / <90mmHg. The 16 quality indicator were ranked according to their relative quality weights, which were estimated from its association with the relative risk of survival, adjusting for patient's baseline severity and dialysis facility characteristics. Results : Out of the entire sample of 2,179 patients, only 229 (10%) meet th recommended outcome levels for all 4 treatment areas. Overall, the study patients were distributed evenly over the 16 quality indicators, indicating a great variation in the quality of ESRD care. It appears that the rank of the 16 quality-indicators is driven by serum albumin concentration, suggesting that serum albumin concentration may be the most powerful predictor of ESRD patient survival among the 4 outcome measures. Conclusion : The developed quality indicator has the advantage of describin a range of care for dialysis patients and thus providing a more complete picture of care as compared to previous studies that have focused on only single or few components of the ESRD care.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.4
• /
• pp.1863-1871
• /
• 2012

Utilization of the former OSS was mainly focused on the usage of system applications such as operating system and DBMS. However, nowadays many companies are trying to make use of OSS based on the application rather than the system software. However, selection of base OSS is the most important to develop of application for utilizing OSS. The scope of existing OSS evaluation studies is covered the entire OSS quality. Thus existing studies of evaluation of OSS selection is insufficient. Also, the result of assessment is based on qualitative measurement rather than quantitative ones. In this paper, we derives only the indicators for selection among the existing OSS assessment indicators and suggests the assessment indicator that is capable of quantitative assessment in accordance with the characteristics of the project. The proposed assessment indicator is divided into an initial assessment indicator that can be assessed with only the information within the OSS community, and the detailed assessment indicator through metrics to make quantitative measurements possible. In this way, an objective basis can be provided through quantitative scores & indicators when selecting OSS.

• International Journal of Control, Automation, and Systems
• /
• v.3 no.spc2
• /
• pp.315-321
• /
• 2005

Interactions among multiple control functions of a UPFC installed in a power system have been observed in power system simulation and been reported in authors' previous publications [1,2]. This paper presents new analytical results about these observed interactions and concludes that they are due to the control conflict between the series and shunt part of the UPFC, which are connected through the internal common capacitor inside the UPFC. Investigation in the paper reveals, for the first time as far as the authors are aware of, that the linkage pattern of UPFC series and shunt part decides whether the control functions implemented by the UPFC series and shunt part conflict each other or not. This linkage pattern of UPFC series and shunt part can be described by the flow of active power through the UPFC at steady-state operation of the power system. Hence in order to predict the possible interactions among multiple control functions of the UPFC, an interaction indicator is proposed in the paper which is the direction and amount of active power flow through the internal link of the UPFC series and shunt part at steady-state operation of the power system. This proposed interaction indicator can be calculated from power system load flow solution without having to run simulation of the power system with UPFC controllers installed. By using the indicator, the interactions among multiple control functions of the UPFC caused by badly set controller's parameters are excluded. Therefore the indicator only identifies the possible existence of inherent control conflict of the UPFC.