• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.214-215
• /
• 1994

The VCB(Vacuum Circuit Breaker), which has been used in power distribution system, have prevented the performance of the phase modifying equipment (Condenser Bank and Shunt Reactor) and the important parts in the electric power system because of the transient voltage in opening and closing circuit. So, we developed the 25.8kV $SF_6$ gas GCB(GAS Circuit Breaker), which had the few occurance of the surge in opening & closing circuit and had the high reliability, based in our own technology.

• Elastomers and Composites
• /
• v.29 no.1
• /
• pp.9-17
• /
• 1994

Methylmetharylate grafted latex(MGL) was prepared by emulsion graft copolymerization of methyl methacrylate onto natural rubber latex(NRL) by using t-butyl hydroperoxide and tetraethylene pentamine in an aqueous medium. Blending of MGL and NRL with different mixing ratio carried out and viscosity and particle size distribution of blend latex were determined. It was found that the optimum condition of mature time, vulcanizing temperature and time for preparation of blend latex films were investigated. latex films prepared by dipping process were meaured. As the reuslt, blend latex(NR-d-MG) films obtained from two-dipping system were more excellent than NR and MG film obtained from one-dipping system.

• Nuclear Medicine and Molecular Imaging
• /
• v.41 no.6
• /
• pp.525-529
• /
• 2007

Regulation for the radiopharmaceuticals should be reasonably different from that of other drugs. Radiopharmaceuticals are always used by compounding based on the doctor's order, have short half life and very low administration dose. Its pharmacological effect is not from its chemical effect but from radiation. The background for exploratory IND (Investigational New Drug) explained by the FDA was to reduce the time and resources expended on candidate products that are unlikely to suceed, new tools are needed to distinguish earlier in the process those candidates that hold promise from those that do not. In this review, basic concept for exploratory IND and RDRC guideline is summarized and various suggestions for improving and expediting procedure for new radiopharmaceutical development would be described.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.12 no.3
• /
• pp.33-39
• /
• 1992

This paper presents a summary of the immersion ultrasonic test to analyze the quality of diffusion bonding parts. The most important property of diffusion bonding parts is bonding strength, and that can be obtained by shear test. By comparing among data obtained by ultrasonic test(C-Scan) and those by shear test (bonding strength), these data are shown to be in good relation. Therefore ultrasonic C-Scan test result can be used successfully in quantitative quality control for diffusion bonded parts.

• Polymer Science and Technology
• /
• v.4 no.2
• /
• pp.89-97
• /
• 1993

• Polymer Science and Technology
• /
• v.6 no.3
• /
• pp.226-241
• /
• 1995

• Polymer Science and Technology
• /
• v.4 no.5
• /
• pp.352-357
• /
• 1993

• Magazine of RCR
• /
• v.3 no.1
• /
• pp.27-34
• /
• 2007

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.9 no.6
• /
• pp.476-481
• /
• 2004

The aim of this study was to formulate a sustained release system for indomethacin (IND) with rosin gum obtained from a pine tree. Rosin microparticles were prepared by a disper­sion and dialysis method without the addition of surfactant. In order to investigate the influence of solvents on the formation of colloidal microparitcles, various solvents like ethanol, DMF, DMAc, and acetone were used. The rosin microparticles containing IND were characterized by X­ray differactometry (XRD) and differential scanning calorimetry (DSC). The morphologies of rosin microparticles observed by scanning electron microscopy (SEM) were spherical. The solvents used to dissolve rosin significantly affected the drug content and drug release rate of IND. The release behaviors of IND from the rosin microparticles were dependent on the drug content and size of the particles. Rosin micorparticles with a higher drug content and of a larger particle size had a slower drug release rate. Also, the IND release rate from the rosin microparticles could be regulated by the rosin content in the microparticles. From these results, rosin microparticles have the potential of being used as a sustained release system of IND.

• The Korean Journal of Ecology
• /
• v.20 no.5
• /
• pp.355-365
• /
• 1997

Macrozoobenthic community structure was studied on the mud-tidalflat around Mokpo coastal area, Korea, from September 1995 to May 1996. Ten sampling stations were chosen along the 1km transect with a 100 m intervals. Triple macrozoobenthos sampling were conducted with a stainless box core sampler (size $13{\times}22{\times}30$ cm) at each station on the seasonal basis. A total of 119 species of macrobenthos was sampled with a mean density 2,357 $ind./m^2$ and biomass of 180. 94 $g/m^2$ during the study period. Of these species, there were 51 species of mollusce (43%), 36 of crustaceans (30%), 27 of polychaetes (23%). Molluscs were density-dominant faunal group with a mean density of 1,804 $ind./m^2$, comprising of 75% of the total density of the benthic animals. It was followed by polychaetes with 347 $ind./m^2$ (15% of the total density). Molluscs were biomass-dominant faunal group with a mean biomass of 147.51 $g/m^2$ (82% of the total biomass). The number of species, abundance and biomass showed increasing trends toward the lower intertidal stations from the higher stations. Major dominant species were Musculista senhousia (bivalve), Capitellidae spp. (polychaetes) with a density of 1,640 $ind./m^2$ and 179 $ind./m^2$ , respectively. The density of M. senhousia was more than 63% of the total density of benthic organism on the tidal area. Small gastropod Cerithideopsilla umumriensis was another dominant epifaunal species between st.1 and 2 with a mean density of 100 $ind./m^2$. Cluster analysis showed that the benthic community could be divided into three stational groups, that is, upper, middle and lower groups by the exposure duration.