• Journal of Periodontal and Implant Science
• /
• v.34 no.1
• /
• pp.139-148
• /
• 2004

MMPs(Matrix metalloproteinases)는 치주질환에서 주된 조직파괴단백분해효소인 것은 알려져 있고 TIMPs(Tissue inhibitor of Matrix metalloproteinase)는 MMPs의 작용을 억제한다라고 알려져 있다. 이 둘간의 불균형으로 인해서 조직파괴가 더 가속화될 수 있다. 이 두 연구의 목적은 ELISA kit를 사용하여 특정 MMPs(1,2,3,8,9,13)과 TIMPs(1,2)의 양이 건강한 환자와 비교하여서 치주염 환자에서 달라지는지 알아보고 MMPs(1,2,3,8,9,13), TIMPs(1,2)와 치은열구깊이와 GI score와의 관계를 알아보기로 한다. 8명의 만성 치주염 환자와 4명의 급속진행형 치주염 환자가 실험군으로 참여하였고 5명의 건강한 치주조직을 환자가 대조군으로 참여하였다. 임상적인 측정은 GI score와 치주낭측정을 통하여 이루어졌다. 8명의 만성 치주염을 가진 환자와 4명의 급속진행형 치주염을 가진 환자에서 각각 치주낭 깊이가 3mm이하인 부위에서 6개의 치은열구액 표본과 치주낭 깊이가 6mm 이상인 곳에서 6개의 치은열구액 표본을 채취하였다. 건강한 치주조직을 가진 5명의 환자는 단지 치주낭깊이가 3mm 이하인 건강한 부위에서만 치은열구액 표본을 제공하였다. MMPs(1,2,3,8,9,13)과 MIMPs(1,2)의 측정은 Human Biotrack ELISA kit를 사용하여서 측정하였다. 통계처리는 MMPs, MIMPs의 실험군과 대조군의 차이는 Kruskal-Wallis test를 사용하였고 MMPs, TIMPs와 치주낭 깊이와 GI score의 관계정도는 Pearson's correlation coefficient를 사용하였다. 실험결과 대조군과 비교하여 만성 치주염 환자에서 치주낭 깊이가 6mm 이상인 부위에서 MMP9의 수치가 통계적으로 유의할만하게 높았으며(p=0.04) MIMP2의 수치가 대조군과 비교하여 치주낭 깊이가 3mm 이하인 부위를 가진 만성치주염 환자에서 통계적으로 유의할만하게 높았다(=0.049). MMPs(1,2,3,8,9,13), MIMPs(1,2)의 활동성과 치주낭 깊이의 관계에서 둘간의 통계적으로 유의할만한 관계는 존재하지 않았으나 MMP1(r=0.35)과 MMP2(r=0.31)가 상대적으로 높은 관계를 보였다. 또한 MMPs(1,2,3,8,9,13), MIMPs(1,2)의 활동성과 GI score의 관계에서도 둘간의 통계학적으로 유의할만한 관계는 존재하지 않으나 MMP1(r=0.4), MMP2(r=0.29), MMP9(r=0.26)가 상대적으로 높은 관계를 보였다. 이 실험의 결과로 볼 때 MMP9가 만성치주염 환자의 질환이 있는 부위에서만 염증의 지표가 될 수 있으며 MIMP2가 만성치주염 환자의 염증이 없는 부위에서 높은 농도로 존재하는 것으로 보아서 MIMP2가 MMPs에 대한 억제작용을 하여서 염증의 진행을 방해하는 역할을 한다라고 볼 수 있다.

• Journal of Periodontal and Implant Science
• /
• v.25 no.3
• /
• pp.587-602
• /
• 1995

The purpose of this study was to compare the effects of citric acid and tetracycline HCI application to the root surfaces of periodontally diseased teeth on the proliferation and spreading of human periodontal ligament cells. The roots were prepared so that the comparison could be made among root planed, citric acid treated and tetracycline HCI treated surfaces. In the cell proliferation experiment, human periodontal ligament cells at a concentration of $1{\times}10^5$ cells/ml were seeded in each culture well with specimens and incubated for 6 hours. Then, the specimens were transferred to a fresh culture well and incubated for 24, 48, 72 hours respectively. The cell counting was done after trypsinization. In the cell spreading experiment, $1{\times}10^4$ cells/ml were seeded in each culture well and incubated for 30min, 6 hours and 24 hours at 37.5$^{\circ}C$ in a $CO_2$ incubator. Then, all specimens were fixed with phosphate buffered glutaraldehydes, postfixed with phosphate buffered osmium tetraoxide, stained with phosphate buffered tannic acid, dehydrated in ethanol, dried at a critical point, coated with gold and examined under a scanning electron microscope. The results were as follows:In the cell proliferation experiments, the number of attached cells increased more in the tetracycline treated group than in the other groups. In the initial attachment, the appearance of the tetracycline treated the groups was slightly more spread out than in the other groups. After 6 hours of incubation, it was observed in most of the cells that cell morphologic alteration went from ovoid shapes sto spindle shapes. After 24 hours of incubation, the cells of all groups had a fusiform appearance and were connected to each other by numerous cytoplasmic processes. The tetracycline and citric acid treated groups had a similar spreading appearance of periodontal ligament cells, but the tetracycline treated group was more effective in the cell proliferation than the citric acid group.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.1
• /
• pp.46-52
• /
• 2009

Statement of problem: Recently, titanium has become popular as superstructure material in implant dentistry because titanium superstructure can be easily milled by means of computer-aided design and manufacture (CAD/CAM) technique. But retention form such as nail head or bead cannot be cut as a result of technical limitation of CAD/CAM milling and bond strength between titanium and porcelain is not as strong as that of conventional gold or metal alloy. Purpose: The objective of this study was to evaluate the shear bond strength of three different materials: heat curing resin, composite resin, porcelain which were bonded to grade II commercially pure Titanium (CP-Ti). Material and methods: Thirty seven CP-Ti discs with 9 mm diameter, 10 mm height were divided into three groups and were bonded with heat curing resin (Lucitone 199), indirect composite resin (Sinfony), and porcelain (Triceram) which were mounted in a former with 7 mm diameter and 1 mm height. Samples were thermocycled for 1000 cycles at between $5-55^{\circ}C$. Shear bond strength (MPa) was measured with Instron Universal Testing Machine with cross head speed of 1 mm/min. The failure pattern was observed at the fractured surface and divided into adhesive, cohesive, and combination failure. The data were analyzed by one-way ANOVA and Scheffe's multiple range test (${\alpha}=0.05$). Results: Lucitone 199 ($17.82{\pm}5.13\;MPa$) showed the highest shear bond strength, followed by Triceram ($12.97{\pm}2.11\;MPa$), and Sinfony ($6.00{\pm}1.31\;MPa$). Most of the failure patterns in Lucitone 199 and Sinfony group were adhesive failure, whereas those in Triceram group were combination failure. Conclusion: Heat curing resin formed the strongest bond to titanium which is used as a CAD/CAM milling block. But the bond strength is still low compared with the bond utilizing mechanical interlocking and there are many adhesive failures which suggest that more studies to enhance bond strength are needed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.3
• /
• pp.169-175
• /
• 2012

Purpose: In this study, brazing characteristics of $ZrO_2$ and Ti-6Al-4V brazed joints with increasing temperature were investigated. Materials and methods: The sample size of the $ZrO_2$ was $3mm{\times}3mm{\times}3mm$ (thickness), and Ti-6Al-4V was $10mm(diameter){\times}5mm(thickness)$. The filler metal consisted of Ag-Cu-Sn-Ti was prepared in powder form. The brazing sample was heated in a vacuum furnace under $5{\times}10^{-6}$ torr atmosphere, while the brazing temperature was changed from 700 to $800^{\circ}C$ for 30 min. Results: The experimental results shows that brazed joint of $ZrO_2$ and Ti-6Al-4V occurred at $700-800^{\circ}C$. Brazed joint consisted of Ag-rich matrix and Cu-rich phase. A Cu-Ti intermetallic compounds and a Ti-Sn-Cu-Ag alloy were produced along the Ti-6Al-4V bonded interface. Thickness of the reacted layer along the Ti-6Al-4V bonded interface was increased with brazing temperature. Defect ratios of $ZrO_2$ and Ti-6Al-4V bonded interfaces decreased with brazing temperature. Conclusion: Thickness and defect ratio of brazed joints were decreased with increasing temperature. Zirconia was not wetting with filler metal, because the reaction between $ZrO_2$ and Ti did not occur enough.

• Journal of Periodontal and Implant Science
• /
• v.26 no.4
• /
• pp.989-1002
• /
• 1996

The purpose of this study was to determine the effect of a pulsed Nd:YAG laser irradiation on human gingival tissues. The patients, who were planned to be treated by clinical crown lengthening procedure and gingivectomy, were selected. All the patients received oral hygiene instruction, scaling and root planing at preoperation. The crest of gingival tissue on upper and lower anterior teeth was irradiated by a pulsed Nd:YAG laser(El. EN. EN060, Italy) with a fiber optic of 300 m in contact mode for 20 seconds. Gingival tissues were divided into 4 groups according to the laser power of 1.0W(10Hz, 100mJ), 2.0W(20Hz, 100mJ), 3.0W(30Hz, 100mJ) and 4.0W(40Hz, 100mJ). Immediately after the laser irradiation, the specimens were excised, fixed 10% neutral formalin, sectioned $4-6{\mu}m$ thick, stained by Hematoxylin-Eosin and Periodic Acid Schiff stain and observed under light microscope. The removed tissue depth and the coagulated layer depth due to a laser irradiation by a laser irradiation were measured on the microphotographs. The difference of measurements according to the different laser power was statistical1y analyzed by Kruskal Wallis Test with SAS program. The results were as follows : 1. In histologic findings of irradiated gingival tissues; a. In the irradiated gingival specimen with 1.0W laser power, some vesicles were observed in limited superficial layer of gingival epithelium. b. In the irradiated gingival specimen with 2.0W and 3.0W laser power, the epithelium was almost removed except for the traces of viable basal cell remnants at ret peg, and coagulation necrosis related with the thermal effect of laser was noted. c. In the irradiated gingival specimen with 4.0W laser power, complete removal of epithelium, partial removal of underlying connective tissue, and the coagulation necrosis of subjacent gingival tissue were shown. 2. The removed tissue depth was deeper in the irradiated specimens with higher power. There was a statistical significance in the difference of removed tissue depth between 1.0W group ($44.54{\pm}6.99um$) and 3.0W group ($99.75{\pm}6.64{\mu}m$), and between 1.0W group($44.54{\pm}6.99{\mu}m$) and 4.0W group($111.36{\pm}4.50{\mu}m$), and between 2.0W group($98.01{\pm}4.53{\mu}m$) and 4.0W group($111.36{\pm}4.50{\mu}m$)(P<0.05). 3. The coagulated layer depth was deeper in the irradiated specimens with higher power. There was a statistical significance in the difference of coagulated layer depth between 1.0W group($31.82{\pm}8.99{\mu}m$) and 3.0W group($55.99{\pm}20.94{\mu}m$), and between 1.0W group($31.82{\pm}8.99{\mu}m$) and 4.0W group($83.68{\pm}10.34{\mu}m$)(P<0.05). From this study, the results demonstrated that the effects of a pulsed Nd:YAG laser irradiation on gingival tissues seemed to depend on the laser power and that the irradiation with high power could be harmful to adjacent healthy tissue.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.3
• /
• pp.167-174
• /
• 2013

Purpose: This study was conducted to evaluate the roughness and surface alternations of three differently blasted titanium discs treated by $Nd:YVO_4$ Laser irradiation in different conditions. Materials and methods: Thirty commercially pure titanium discs were prepared and divided into three groups. Each group was consisted of 10 samples and blasted by $ZrO_2$ (zirconium dioxide), $Al_2O_3$ (aluminum oxide), and RBM (resorbable blasted media). All the samples were degreased by ultrasonic cleaner afterward. Nine different conditions were established by changing scanning speed (100, 300, 500 mm/s) and repetition rate (5, 15, 35 kHz) of $Nd:YVO_4$ Laser (Laser Pro D-20, Laserval $Korea^{(R)}$, Seoul, South Korea). After laser irradiation, a scanning electron microscope, X-ray diffraction analysis, energy dispersive X-ray spectroscopic analysis, and surface roughness analysis were used to assess the roughness and surface alternations of the samples. Results: According to a scanning electron microscope (SEM), titanium discs treated with laser irradiation showed characteristic patterns in contrast to the control which showed irregular patterns. According to the X-ray diffraction analysis, only $Al_2O_3$ group showed its own peak. The oxidation tendency and surface roughness of titanium were similar to the control in the energy dispersive X-ray spectroscopic analysis. The surface roughness was inversely proportional to the scanning speed, whereas proportional to the repetition rate of $Nd:YVO_4$. Conclusion: The surface microstructures and roughness of the test discs were modified by the radiation of $Nd:YVO_4$ laser. Therefore, laser irradiation could be considered one of the methods to modify implant surfaces for the enhancement of osseointegration.

• Clinical and Experimental Reproductive Medicine
• /
• v.24 no.1
• /
• pp.119-133
• /
• 1997

In spite of much progress in vitro fertilization and embryo transfer (IVF-ET) program, the pregnancy rate remains at 20-30%, and the endometrial implantation rate per embryo transferred at 10-15%. As a result, about 90% of embryos may fail to implant to the endometrium, and many attempts such as optimization of follicular development, improvement of in vitro culture system including coculture, and micromanipulation of zona pellucida have been made to improve embryonic implantation after IVF-ET. Recently, several procedures of assisted hatching (AH) using micromanipulation have been introduced, and pregnancies and births have been obtained after AH. To develop and establish AH as an effective procedure to improve embryonic implantation, AH with partial zona dissection (PZD) was performed in 116 cycles of 89 infertile couples who had previous repeated failures of standard IVF-ET more than two times (Group I: 71 cycles in 54 patients), or who had implantation failure of embryos with good quality (Group II: 15 cycles in 13), or who had undergone AH without specific indication (Group III: 30 cycles in 22) from January, 1995 to Februry, 1996, and the outcomes of AH were analyzed according to pregnancy rate. The number of oocytes retrieved after controlled ovarian hyperstimulation (COH) was $9.9{\pm}7.1$ in Group I, $11.5{\pm}4.5$ in Group II, and $7.9{\pm}6.4$ in Group III. The number of embryos transferred after AH was $4.7{\pm}1.8$ in Group I, $5.3{\pm}1.3$ in Group II, and $3.5{\pm}2.4$ in Group III. The mean cumulative embryo score (CES) was $56.8{\pm}30.0$ in Group I, $76.1{\pm}35.9$ in Group II, and $38.5{\pm}29.9$ in Group III. The overall clinical pregnancy rate per cycle and per patient was 12.7% (9/71) and 16.7% (9/54) in Group I, 33.3% (5/15) and 38.5% (5/13) in Group II, and 6.7% (2/30) and 9.1% (2/22) in Group III, respectively. There were significant differences in the numbers of oocytes retrieved and embryos transferred, CES, and the clinical pregnancy rate per cycle among three groups. There was a significant inverse correlation between basal serum FSH level and CES, and no pregnancy occurred in patients with CES less than 20. In conclusion, AH of human embryos with PZD prior to ET has improved the implantation and pregnancy rates in IVF-ET patients with the past history of repeated failures, especially in spite of transfer of embryos with good quality, and AH will provide a range of novel techniques which may contribute much to effective management of infertile couples.

• Clinical and Experimental Reproductive Medicine
• /
• v.34 no.3
• /
• pp.149-157
• /
• 2007

Objective: This study was performed to compare the expression of osteopontin (OPN) mRNA and protein in the eutopic and ectopic endometrial tissues in women with endometriosis and endometrial tissues in women without endometriosis. Methods: A total of 32 women with histologically confirmed endometriosis were recruited for study group. For controls, 34 women undergoing operative treatment for cervical intraepithelial neoplasia (CIN) or benign gynecologic condition other than endometriosis were recruited. At the time of laparoscopy or laparotomy, a biopsy specimen was taken from the endometrial cavity and peritoneal endometrial implant or endometrioma whenever appropriate. We employed real time quantitative RT-PCR to quantify OPN mRNA expression of these tissues and performed western blot analysis to measure the quantity of OPN. Results: The expression of OPN mRNA was significantly higher in both eutopic and ectopic endometrial tissues of women with endometriosis than in endometrial tissues of controls during both proliferative and secretory phase. In the eutopic endometrial tissue of women with endometriosis, OPN mRNA expression significantly increased during the secretory phase compared to the proliferative phase in women with endometriosis as well as controls. However, in the ectopic endometrial tissue, OPN mRNA expression significantly decreased during the secretory phase compared to the proliferative phase. The expression of OPN protein was significantly higher in women with endometriosis than in controls. Conclusion: This study shows the marked expression of OPN mRNA and protein in eutopic and ectopic endometrial tissues in women with endometriosis may be associated with the adhesion and invasion of endometrial explants.

• The Journal of Engineering Research
• /
• v.3 no.1
• /
• pp.189-197
• /
• 1998

Hyeroxyapatite(HAp) which has good biocompatibility was made by Wet Chemical Process. The surface of Ti-6Al-4V, coated with HAp by lon Beam Assisted Deposition (IBAD), was treated with 5ppm, 10ppm, 20ppm, and 100ppm of $AgNO_3$ solution. In this Ag impregnation process, $Ca^{2+}$ of HAp was substituted with $Ag^+$ of $AgNO_3$. In this study, the antimicrobial effect and biocompatibility of Ti-6Al-4V alloy which was coated with Ag-HAp were examined. The antimicrobial test was carried out with two kinds of bacteria(P. Aeruginosa, S. Epidermidis), which are highly infectious in a transplanting operation of implant materials. As a result of the test, it was observed that Ti-6Al-4V alloy which was treated by 20ppm of $AgNO_3$ solution has good biocompatibility. In order to observe the antimicrobial mechanism of $Ag^+$, E. coli which is the most common bacterium was treated by Ag-HAp. Then cell morphology of E. coli was observed by the transmission electron microscope(TEM). The destruction of cell wall and cytoplasm of E. coil were observed. A black spot appeared in the cytoplasm was analyzed by energy dispersive analysis X-ray (EDAX) and it showed a small amount of $Ag^+$. Thus, it was proved that $Ag^+$ destroys bacteria effectively and Ti-6Al-4V alloy which was impregnate with Ag ion show antimicrobial effect on infection bacteria.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.2
• /
• pp.35-43
• /
• 2012

Purpose : PET/CT performed CT-based attenuation correction generates the beam hardening artifact by metallic implant. The attenuation correction causes over or underestimate of the area adjacent to metallic hip prosthetic material and change of $^{18}F$-FDG uptake. Also, the image quality and the diagnosability on genitourinary disease are reduced. Therefore, this study will evaluate the usefulness of MAR (Metal Artifact Reduction) algorithm method to improve the image quality on PET/CT. Materials and Methods : PET/CT was performed by fixing hip prosthesis in SPECT/PET phantom. In PET images with and Without MAR algorithm, the Bright streak, Dark streak, Metal region and Background area that appeared on CT were confirmed, and the change of each SUV (standardized uptake value) was analyzed. Also, in 15 patients who underwent total hip arthroplasty, each MAR algorithm and Without MAR algorithm and non attenuation correction was evaluated. Results : In PET image Without MAR algorithm, SUV of Bright streak region was $0.98{\pm}0.48$ g/ml; Dark streak region was $0.88{\pm}0.02$ g/ml; Metal region was $0.24{\pm}0.16$ g/ml, Background area was $0.91{\pm}0.18$ g/ml. In SUV of PET image with MAR algorithm, Bright streak region was $0.88{\pm}0.49$ g/ml, Dark streak region was $0.63{\pm}0.21$ g/ml, Metal region was $0.06{\pm}0.07$ g/ml, Background was $0.90{\pm}0.02$ g/ml. SUV generally decreased when applying MAR algorithm. In PET image Without MAR algorithm, SUVs of Bright region were higher than those measured in the Background, and it was false positive uptake. But, in PET image with MAR algorithm, SUVs of Bright region were similar to the Background, and false positive uptake disappeared. Conclusion : MAR algorithm could reduce an increase of $^{18}F$-FDG uptake due to attenuation correction in the hip surrounding tissue. However, decrease of SUV in Dark streak region should be considered in the future. Therefore, this study propose that the diagnostic accuracy can be improved in genitourinary diseases adjacent to metallic hip prosthesis, if provided PET images with and Without MAR algorithm, and non attenuation correction images at the same time.